Download Disan DS A01 Technical data

TABLE OF CONTENTS
Planning
4
Making of the piping
21
Basic planning information ....................................... 4
General instructions ............................................... 21
Location of inlet valves on the floor plan ....................4
Laying of the tubing ................................................ 21
Location of the inlet valves: height ........................... 5
Laying and connection of
the water vacuum system ....................................... 22
Location of the central vacuum cleaner .....................5
Planning of the tubing .............................................. 5
Planning of the water vacuum system ...................... 7
Laying of the backup boxes .................................... 23
Installation of the breather pipe
23
Laying of the electric control line
24
Particular requirements of planning ......................... 9
Testing
25
Planning of the power mains .................................. 10
Location of losses .................................................. 26
Characteristics of the fittings .................................... 8
Planning of the breather pipe ................................... 8
Calculation of the materials/Cost-estimate
12
Definition of the material needed for the tubing ....... 12
Choice of the inlet valves and
of the electricity plates ........................................... 12
Choice of the cleaning accessories ....................... 16
Approximate calculation of labor for the complete
installation of the system ........................................ 16
Installation and connection of the inlet valves and of
the central vacuum cleaner
27
Installation and connection of the inlet valves .......... 27
Installation and connection of the central vacuum cleaner 28
Check of the functioning of the by-pass
valve on the dust separator .................................... 31
By-pass valves adjustment ..................................... 31
Choice of the central vacuum cleaner .................... 16
Testing of the inlet valves ....................................... 32
List of optional for mod. DS Super Compact ........... 19
Final testing of the system ..................................... 32
List of optional for mod. Ds Modular range ............ 19
Delivery of the finished system to the customer ..... 32
Technical data of the central units .......................... 19
Certification ............................................................ 35
3