Download Mastervolt IVO Compact Specifications

Transcript
SPECIFICATIONS IVO COMPACT
Model
Article no.
IVO Compact 12/25-3
43012500
DC
Charge voltage absorption (25°C)
Charge voltage float (Wet; 25°C)
Charge voltage float (Gel; 25°C)
Total charge current
DC consumption with connected battery
Number of outlets
Charge characteristics
Max. absorption time, reduced output
Temperature compensation
Voltage compensation
Recommended DC fuse (Main)
Recommended DC fuse (Slave)
Wire size < 1.5m
Wire size > 1.5m
Recommended battery capacity
14.25VDC
28.50VDC
13.25VDC
26.50VDC
13.80VDC
27.60VDC
25A
10A
<10mA
<5mA
2 main outputs + 1 slave 3A
1 main output + 1 slave 3A
IUoUo / 3 stage / automatic / DIN 41772
6 hours (adjustable)
6 hours (adjustable)
30mV/°C
60mV/°C
Auto sense
Auto sense
30A-T
20A-T
5A-T
5A-T
6 mm²/AWG9
4mm²/AWG11
10mm²/AWG7
6mm²/AWG9
50~450Ah
50~300Ah
AC
Input voltage range
Frequency
Full load consumption (230VAC)
AC cable
Power factor / cos phi
180~250VAC (90~140VAC)
50/60Hz
419VA
3x0.75 mm²
0.99
General
Ambient operating temperature
IVO Compact 24/10-2
43021000
180~250VAC (90~140VAC)
50/60Hz
336VA
3x0.75 mm²
0.99
Storage temperature
Operating humidity
Efficiency
Cooling
Guaranteed operation: 0°C to 60°C (derating above +40°C, 5% per °C); in
practice: -20°C to 60°C
-25°C to 85°C
95% max., non-condensing
90% (at nominal input voltage)
Variofan ‘low noise’
Protections
Short circuiting
Over heating
Protection degree
Yes
Limited power by temperature sense circuit
IP21
Options
Communication
Suitable as power supply without battery
Mechanical
Connections input/output
Dimensions (HxWxD)
Mounting holes
Weight
Cabinet
Directives:
Set points software
Max. bulk/abs time
Return amps
Abs voltage
Float voltage
Forced to float
Quasi RS232, modular RJ12 connection, to alter set points and to change
characteristics (optional interface required) or to connect a temperature
sensor and/or remote panel.
Yes, in the Forced to float mode.
Screw terminals, maximum wire size 16mm² / AWG 5
228 x 153 x 82 mm; 8.9 x 6.1 x 3.2 inch
Diameter 5mm
2.4 kg / 3.9 lbs
Anodized aluminium, strapton ABS blend, blue RAL 5021
- Generic emission and disturbances standard: EN 55014-1:1993
- Generic harmonic current emissions: EN61000-3-3:1995
- Generic & safety accreditations immunity standard: EN55014-2: 1997
- Electrostatic discharge : EN61000-4-2:1995
- Electrical fast transients: EN61000-4-4:1995
- Surge transient: EN61000-4-5:1995
- Conducted radio frequency disturbances: EN61000-4-6:1996
- Voltage dips: EN61000-4-11:1994
Default setting
360min.
2/16 of I-max
14.25/28.50VDC
13.25/26.50VDC
13.25/26.50VDC
Set points software
Gel voltage setting
Diode compensation setting
DC alarm voltage
DC alarm delay
Default setting
550mV
600mV
12.50/25.00VDC
30s