Download Casio KL-100E User`s guide

Error Messages
Message
Alpha Characters
Possible Causes
Action
• Use only one B mark.
Only two lines of text can
* This message
be input, so text can
appears on the
contain only one B
screen for about
mark.
one second.
• Attempt to input B mark • Do not use B marks.
while 6mm is specified as
6mm tape can have only
the tape width.
one line of text, so text
cannot contain any B
marks.
• Label text containing a
• Delete the B mark to
B mark was input and
print on 6mm tape or
then tape width specificaswitch back to a wider
tion was changed to
tape.
6mm. (ERR! message
appears when you try to
perform a print operation.)
• Text that is longer than
• Shorten the text to be
5.5cm when stamp
printed and try again.
printing is selected.
• Attempt to print a stamp
• Change the tape width
or frame while 6mm is
setting to OFF and try
specified for the tape
printing the stamp again.
width.
ERR!
• Attempt to input two B
marks within the same
text.
• Both text memory areas
(AREA 1 and AREA 2)
already contain text.
• Delete text from one of
the text memory areas
and then store the new
text.
BATT
• Battery power is too low.
• Replace batteries.
ERR!
• Memory data has become • Initialize the Label
corrupted for some
Printer.
reason.
FUL!
* This message
appears on the
screen for about
one second.
Symbols
E-21