Download 7602030 ASSEMBLY INSTRUCTIONS

7602030
FIG.5
2) INSTALLING THE LOWER RAIL
- Using the proper assembly punching (Fig. 3/b), locate
the first guide section in which is the curve (Fig. 3/a)
starting from the high plan.
NOTE: If there are no curves, locate the first rectilinear
section (Fig. 4/a) always starting from above.
- Position the curve in the installation point (Fig. 6/c).
- Taking as reference the values in the assembly diagram
(example Fig. 5) slide-off the feet and lightly tighten
just one screw (Fig. 6/a) of each connection device
(Fig. 6/d).
NOTE: Make sure the outer side of the guide stands at
FIG.3
b
FIG.6
d
a
d
a
A
B
FIG.4
a
c
160
a
C
b
D
FIG.7
a
A
19