Download Craftsman 320.17543 Operator`s manual
Transcript
INTERNAL
ROUTING WITH PLUNGE BASE (Flgso 19 and 19a)
1 Wilhdeplh-of_culset, andlhoplungeactionlockedtntheralsed{Up)poslgon,
lure motor "On" and lel motor build up to its lull speed (see Fig 19)
2 To begin your cul, unlock the plunge lock lover and gsntlylowar the plunge action
down evenly Into the workpiece (see Fig 19a)
i
Feed Direction
3 When the desired depth-of-cut is achieved, lock the plunge lock lover (Down) and
proceed to make your cut(see Fig ! 9a)
4 When cut Iscompleted, turn motor"Off" and lel cotter bit come toa complete slop
5 When culler bit comes to a comptele stop, unlock plunge look lever (Up) and ptunge
action will automatically reiract cutter bit from workplace
damage workplace
endcutter
result bit
In loss
control, causing
personal
, could
Z_ WARNING:
Removing
from of
workplace
while It serious
is stl!l rotetlng
injury.
6 Unplug router :from power source, piece router on workiable, Inspect flnlehed cut
in workplace
on the router base with BOTH HANDS st eli times, Failure to do so could result
i Z_
WARNING:
Always securely
your
workplace
and keep a firm grip
tn toss
of control causing
possible clamp
serious
personal
injury°
28