Download Centurion VECTOR2 Specifications
Transcript
IRBO=IRBC Configures the opening beam to act as a closing beam while the gates are closing. This allows one set of beams to be used across the line of the driveway up to where the gates open. IR BEAM ALARMS While the gates are fully closed, this feature allows the following alarms: Outside closing beam Inside closing beam Opening beam IRBO = IRBC (Combine inside closing beam with opening beam = save on one beam) AMBUSH ALARM Activates an alarm if either the opening or closing beams have been continuously interrupted for a predefined time. The alarm will remain activated while the beams are interrupted. For example; if a would-be intruder covers the beams so that when the gates rm la le justab time A are opened the gates will stay open, the d A s k ken r bloc Intrude m beam bro system will detect this beam override bea taking place and set off an alarm. + = IRB BROKEN TIME The time that the beams must be interrupted before the alarm is activated. BREAK IN ALARM Activates an alarm if the closing beam on the outside of the property is interrupted. The alarm remains activated while the beams are broken and for a period of 30 seconds thereafter. This time is fixed. For example; if a would-be intruder is loitering at the entrance, as soon as the beams are broken an alarm will be set Alarm off. = NB: If this alarm is used, it is recommended that TWO parallel closing beams are used to reduce the chance of false triggering. Intruder breaks beam while loitering at gate ALARM OUTPUT The system can be configured to operate one of the following outputs provided on the controller: ? Onboard buzzer – emits a continuous tone ? Pillar / Courtesy light contact (potential free normally open contact, fused protected – 5A) ? Safety beam common (this is an open collector drive, max current draw 3A, not fuse protected) ? Solenoid lock output (this is an open collector drive, max current draw 3A, not fuse protected) ? Status LED output (operate up to 3 LEDs in parallel or interface with multi LED driver card, CP78) Page 35