Download ANDI AXC1200FWT Instruction manual

Fig. 12
D. Proceed with the remainder of the installation instructions.
CONNECTING THE RANGE
ELECTRICAL SUPPLY
IMPORTANT: The electrical supply to this appliance must
only be installed by a suitably qualified electrician.
The electrical connection to this appliance must be
connected in accordance with AS/NZS 3000 Wiring Rules
and any other relevant regulations.
The fixed wiring supplying this equipment shall have a
switch installed that has an air gap contact separation
in all active (phase) conductors. (this is required for
fixed wired units only)
An isolation switch must be provided near the appliance
in an accessible position, in accordance with
AS/NZS 3000 clause 4.3.11
19