Download EverFocus ECMD200 Specifications

5. Pulse Control:
Position 1: Set to "ONCE" for instant reaction when PIR
Once or twice
detects movement, the connected device/alarm
will be triggered immediately.
Position 2: Triggering will start after the PIR detects
movement twice within 15 seconds.
PULSE
1
2
4 PINS 2 PAIRS w/Jumper connector
6. Terminals:
N.C
N.C: Normally closed
N.O
--
+
N.O: Normally open contacts
Input power (see below)
Relay output current: 2A 24VAC, 2A 24VDC
7. Power:
12V DC
Standby current: 1mA
Working current: 25mA
8. Caution:
Do not place in direct sunlight or reflected sunlight.
Jumpers and wiring terminals of PIR Detector:
OUTPUT TERMINALS
N.C
N.O
--
+
PULSE
COUNT
JP2
PULSE
1
2
J2
LED
SELECTOR
LIGHT CONTROL
RECORDING CONTROL
TIME
J1
ADJUSTMENT
VR2
J4
VR1
8