Download Beltronics Vector 970 Operating instructions

7.
8.
9.
Laser Optical Sensors: collect Laser signals from in front and
behind.
Audio Alert Speaker: all audible alerts are emitted from this
location.
Power Jack: using the straight or coiled cord, vector lr
operates in any vehicle with a 13.8 volt dc negative ground
system (10.5 volt to 16 volt range).
description of features
Power-Up Test Sequence/Start-up Mode
Each time your detector is turned on, vector lr will perform
a power-up test sequence based upon the Start-Up mode
selected. There are five Start-Up modes of operation plus a
Tutorial mode. Release the pwr button at your chosen selection.
Note—Pressing pwr at any time during Start-Up will bypass
the sequence.
NORMAL (Factory pre-set Mode)
Presents Audio and Text Messages for Laser, Ka, K, X and Safety
Warning System® (sws™).After this sequence, the status of
Selectable Features is displayed:
“CTY X” or “CTYALL”; “X/K/KA BAND o n /o f f ”;
“ Au t o m u t e o n /o f f ” ; “SWS o n ”, “SWS o f f ” ;
“SCROLf a s t ”, SCROLs l o w ”. Unit is now ready for
operation.
MODS (Modifications Mode)
Presents Audio and Text Messages for Laser, Ka, K, X,and
Safety Warning System® followed by the presentation of
Selectable Features as chosen by the user.
Q-START (Quick-Start Mode)

Unit will bypass any form of a power-up test sequence and
will display CITY or HIGHWAY depending upon the mode
previously selected. Unit is ready for operation.