Download Bose SL12 Operating instructions

00_CatapultOG.book Page 4 Thursday, October 26, 2006 4:07 PM
Svenska
Nederlands
Italiano
Français
Español
Deutsch
Dansk
English
YOUR SL2 WIRELESS SURROUND LINK
Getting ready
Thank you for choosing a Bose® SL2 Wireless Surround Link. It provides a simple and
convenient means to enjoy the surround sound from your LIFESTYLE® system or
powered Acoustimass® system.
The SL2 features a small radio frequency transmitter and receiver pair that delivers the left
and right surround audio signals, complete with amplification, to surround speakers in the
rear of your room. Running cable from the front to the back of the room is unnecessary.
Unpacking the carton
Carefully unpack the carton and save all packing materials, which provide the most secure
way to transport the product.
Check to be sure your system includes all of the parts shown (Figure 1). If any part appears
damaged, do not attempt to use it. Notify Bose or your authorized Bose dealer immediately.
For Bose contact information, refer to the address sheet included in the carton.
Figure 1
SL2 transmitter
Carton contents
SL2 receiver
Surround speaker cables
20-ft (6.2 m)
Jewel Cube®
speaker adapters
Owner’s
guide
Transmitter cable
6-ft (1.8 m)
Receiver power pack
Transmitter power pack
220 VAC power cord
(Europe)
120 VAC
(U.S./Canada)
120 VAC
(U.S./Canada)
230 VAC power cord
(U.K./Singapore)
240 VAC power cord
(Australia)
220 VAC power cord
(Europe)
230 VAC power cord
(U.K./Singapore)
A box with dotted lines identifies parts that vary with different
product versions or in different countries.
240 VAC power cord
(Australia)
4