Download Multitech MTR-C2 Specifications

CUSTOM AT COMMANDS AT#ACAL?
#ACAL : 2
OK
As such, it is strongly recommended that you do not to use both commands at the same time. Test command returns the supported range of values for <mode>. Syntax Command Command type AT#ACAL=[<mode>] Set AT#ACAL? Read AT#ACAL=? Test Parameters and Values <mode> 0 1 Disables the automatic call function. Default: 0. Enables the automatic call function. If enabled (and &D2 is issued), the transition OFF/ON of DTR causes an automatic call to the first number (position 0) stored in the internal phonebook. Notes „
Type of call depends on the last issue of command +FCLASS. „
See &Z to write and &N to read the number on module internal phonebook. Extended Automatic Call #ACALEXT Set command enables or disables the extended automatic call function. Read command reports either whether the automatic call function is currently enabled or not, and the last <index> setting in the format: #ACALEXT: <mode>,<index> Test command returns three ranges of values, because the range of available positions in a phonebook depends on the selected phonebook. „
<mode> „
<index> when the internal phonebook is selected. „
<index> when “SM” is the selected phonebook. Syntax 171 Command Command type AT#ACALEXT=<mode>,<index> Set AT#ACALEXT? Read AT#ACALEXT=? Test AT Commands for HSPA‐H5 Modems