Download HP 600B Operating instructions

CHAPTER 7
THE MG-MICA MULTIPURPOSE GRID
Flown Configuration
The MG-MICA multipurpose grid (Figure 7.7) allows multiple
600-HP subwoofers fitted with MRF-600 rigging frames
and/or MICA compact high-power curvilinear array loudspeakers to be flown or ground-supported in numerous
configurations. The subwoofer’s MRF-600 GuideALink rigging is directly compatible with MICA, and links to both the
grid and MICA enclosures using the same slots and pins.
The 600-HP rigging frame receives the MG-MICA grid links
exactly the same way as MICA (Figure 7.8). For complete
information on front and rear configurations as well as load
ratings please refer to the MG-MICA Assembly Guide (part
number 05.147.034.01) available on www.meyersound.com.
Figure 7.7. The MG-MICA multipurpose grid
CAUTION: For complete information on load
ratings and how to set up the MG-MICA
multipurpose grid, please use the MG-MICA Assembly Guide (part number 05.147.034.01) available at
www.meyersound.com.
The MG-MICA grid can accommodate a variety of pickup
configurations using its six pick-up points — three on the
front and rear of the frame. In addition, the grid can be suspended from a single pickup point with the optional MGCPMICA center point rigging beam.
600-HP subwoofers equipped with the optional MRF-600
rigging frame can be linked directly to the MG-MICA grid to
form flown and ground-stacked arrays.
Figure 7.8. Using the MG-MICA to fly a 600-HP array
CAUTION: The weight of the 600-HP fitted
with rigging is 215 lbs (97.52 kg). Never exceed the load rating of the MG-MICA grid.
24