Download Makita DCS 34 Technical data
Transcript
WARNING ! Careless or improper use of this product can cause serious or even fatal injury. Before operating a chain saw or other MAKITA products it is important that you read, fully understand and carefully follow the instructions outlined in this owners manual. Kickback may cause severe or fatal injury and is one of many potential dangers in operating a chain saw. Kickback and other safety related precautions are described in detail within this owners manual. Additional owners manuals are available from MAKITA U.S.A., INC., 14930-C Northam Street, La Mirada, CA 90638-5753, USA, Telephone: (714) 522 80 88 and MAKITA CANADA INC.,1950 Forbes Street, Whitby, Ontario, L1N 7B7, Canada, Telephone: (905) 571 22 00. This product complies with: American National Standard Institute B 175.1-1991 chain saw safety standard. Canadian Standards Association Z62.1-95 chain saw safety standard. Z62.3-96 chain saw kickback standard. Society of Automotive Engineers SAEJ 335-Jun 95 „Multiposition small engine exhaust system fire ignition suppression” With the purchase of this chain saw you have chosen a German quality product. Important instructions for the assembly and operation of this saw are given in this manual. For your own safety, we ask you to read the accident prevention instructions very carefully before putting your chain saw into operation, as incorrect handling can, despite all precautions, lead to accidents. With a little care and attention you will have good service and lasting satisfaction from this first-rate product. The following industrial property rights apply: DE 19722629. MAKITA DCS 34 Contents Page Contents Delivery inventory Symbols Safety precautions Denomination of components Technical data Approved bar and chain combinations Mounting the guide bar and saw chain Checking the chain tension Safety chain brake Fuel / Refuelling Checking the chain lubrication Starting the engine Stopping the engine Checking the safety chain brake 3 3 4-15 16 17 17 18-19 20 20 21-22 23 24 24 25 Set idle speed 25 Sharpening the saw chain 26-27 Cleaning the brake band and sprocket 28 Cleaning the guide bar 28 Replacing the saw chain 29 Replacing the suction head 29 Cleaning the air filter 29 Replacing the spark plug 30 Replacing / cleaning the spark arrester screen 30 Instructions for periodic maintenance 31 Service, spare parts and guarantee 31-32 Troubleshooting 32 Extract from the spare parts list 33 Page The MAKITA DCS 34 will be delivered in a protective cardboard box to prevent transport damage. Cardboard is a basic raw material and is consequently reuseable or suitable for recycling (waste paper recycling). RE Y 2
This document in other languages
- français: Makita DCS 34