Download MuxLab 500415 Specifications

Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
Accessories
./Chassis;Rackmount/15058
Fixtures;Wall-mount Balun/15059
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Rackmount Balun Chassis 16
Video Transmission, Media Conversion and Wireless
MUXLAB INC
Wall Mount Balun Fixture
PR21538V2-122491.tif
The Rackmount Balun Chassis 16 is designed as a headend cable-management
solution to allow any combination of MuxLab square baluns to be installed in a 19 in.
relay rack. Headend A/V equipment such as DVD players, video servers and satellite
boxes may be installed in a local wiring closet and connected to the Cat 5 structured
cabling system via a wide array of MuxLab balun solutions.
The panel is custom-tailored to allow any combination of up to 16 MuxLab baluns to
be installed. The baluns may be installed with the RJ45 either front- or rear-facing,
depending on where the Cat 5 cabling will enter or exit the system. At the display end,
the appropriate MuxLab baluns are installed at the display to support a fully
Cat 5 cabling solution. Each balun snaps into place and is held firmly by a spring
latching mechanism. The one-piece design makes the product easy to install and
maintain. There are no parts to lose or replace.
FEATURES
D
• Space-efficient - 2U height
• One-piece design
• Latching mechanism for secure installation
• Supports up to 16 baluns
• Snap-in design for ease of installation
• Baluns install forward- or rear-facing
• Includes four rack-mount screws and washers
• Slot number silkscreen on front and rear
• Blank Filler Modules (500901) sold separately
Anixter No. Vendor No.
Description
349055
500900
Rackmount Balun Chassis 16
8.48
MUXLAB INC
PR21539V2-122492.tif
The Wall Mount Balun Fixture (500910) allows any MuxLab square balun to be
installed behind a Decora compatible wall plate for custom A/V installation. The
baluns may be installed with the RJ45 either front- or rear-facing depending on where
the Cat 5 cabling will enter or exit the system. At the headend, the appropriate
MuxLab baluns are installed near the equipment to support a fully Cat 5 cabling
solution. Each balun snaps into place and is held firmly by a spring latching
mechanism. The one-piece design makes the product easy to install and maintain.
There are no parts to lose or replace.
FEATURES
• Supports one MuxLab square balun
• Snap-off mounting tabs for mounting versatility
• Attaches to standard gang boxes and mud rings
Anixter No. Vendor No.
Description
368149
500910
Wall Mount Balun Fixture
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature