Download Sharp DV-740H Unit installation

Installation and uninstall
Trim Ring installation
Attach the trim ring around the front panel with two indentions on one
side facing upwards
Uninstall
Disassemble trim ring
(1) Push the trim ring upward and pull out the upper part.
(2) Push the trim ring downward and pull out the lower part.
Disassemble the unit
(1) Unscrew the 4 pieces M2×2 screws.
( 2 ) Use a screwdriver to bend straight the bended mounting tab and tip
out the unit from the mounting bracket.
Remove the rubber sheath
Unscrew 4 attached
screws
( 3 ) Pull out the unit from the mounting bracket with both hands .
36