Download DeLonghi MW 600 Technical data

MW865 inc. •GB
23-04-2002
16:16
Pagina 6
4. Open the lid of the smoke discharge ‘C’ fully.
5. Slide the appliance into the recess. Slide the front of the appliance over the fastening bar ‘B’. Keep
sliding it until the front of the oven ‘G’ is resting against the cupboard and the holes ‘D’ under the
oven are aligned with the holes ‘E’ in the fastening bar ‘B’.
6. Fasten the appliance to the fastening bar ‘B’ using the screws ‘F’.
G
B
C
E
F
B
D
G
D
ELECTRICAL CONNECTION - IMPORTANT:
If the appliance is provided with supply cord AND plug, the appliance shall be positioned so that the
plug is always accessible.
If the appliance is provided with a supply cord WITHOUT the plug, the appliance must be connected
to a fixed main wiring incorporating a disconnection switch with contact separation of at least 3 mm
in all poles and provided with permanent connection to earth.
6