Download D-Link DGS-3048 - Switch Specifications
Transcript
DGS-3048 Layer 2 Switch CLI Reference Manual IP Address Protocol Port Timeout Retransmit Key --------------- ------------ --------------------- -------10.53.13.94 TACACS+ 49 5 no use -------Total Entries : 1 DGS3048# local_enable admin Purpose Used to promote user level privileges to administrator level privileges Syntax local_enable admin Description This command is for users who have logged on to the Switch on the normal user level, to become promoted to the administrator level. After logging on to the Switch users, will have only user level privileges. To gain access to administrator level privileges, the user will enter this command and will have to enter an authentication password. Possible authentication methods for this function include TACACS+/RADIUS, user defined server groups, local enable (local account on the Switch), or no authentication (none). Because TACACS+ and RADIUS do not support the enable function, the user must create a special account on the server host which has the username “enable”, and a password configured by the administrator that will support the “enable” function. This function becomes inoperable when the authentication policy is disabled. Parameters None. Restrictions Only users who have the authentication password can issue this command. Example usage: To enable administrator privileges on the Switch: DGS3048#local_enable admin Password: ****** DGS3048# config admin local_enable Purpose Used to configure the local enable password for administrator level privileges. Syntax config admin local_enable <password 15> Description This command will configure the locally enabled password for the local_enable admin command. When a user chooses the “local_enable” method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password configured here, that is set locally on the Switch. Parameters <password 15> - After entering this command, the user will be prompted to enter the old password, then a new password in an 139