Download ViewSonic VA2012wb-2 Service manual

Transcript
Service Manual
ViewSonic VA2012w-1
VA2012wb-1
Model No. VS10859
20” Color TFT LCD Display
(VA2012w-1_VA2012wb-1_SM Rev. 1b Jun. 2006)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright © 2006 by ViewSonic Corporation. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of ViewSonic
Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranty of merchantability or fitness for any
particular purpose. Further, ViewSonic reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation of ViewSonic to notify any
person of such revision or changes.
Trademarks
Opt quest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision
SM Editing Date
1a
11/09/05
1b
06/19/2006
ViewSonic Corporation
ECR Number
Description of Changes
Editor
Initial Release
G. Han
Add 2nd source panel AUO M201EW01 v.0
VS-E060102
(updated RSPL/BOM/EPL)
i
Confidential - Do Not Copy
J. Chang
VA2012w-1_VA2012wb-1
TABLE OF CONTENTS
1.
Precautions and Safety Notices
1
2.
Specification
5
3.
Front Panel Function Control Description
12
4.
Circuit Description
14
5.
Adjustment Procedure
25
6.
Troubleshooting Flow Chart
50
7.
Recommended Spare Parts List
53
8.
Exploded Diagram and Exploded Parts List
55
9.
Block Diagram
59
10. Schematic Diagrams
60
11. PCB Layout Diagrams
67
ViewSonic Corporation
ii
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
1. Precautions and Safety Notices
1. Appropriate Operation
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Turn off the product before cleaning.
Use only a dry soft cloth when cleaning the LCD panel surface.
Use a soft cloth soaked with mild detergent to clean the display housing.
Use only a high quality, safety approved AC/DC power cord.
Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
Do not touch the LCD panel surface with sharp or hard objects.
Do not place heavy objects on the LCD display, video cable, or power cord.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas containing excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar
with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is
exposed in such areas as the associated transformer circuits.
4. LCD Module Handling Precautions
4.1 Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when connecting or disconnecting input connector.
(3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling.
(7) Do not open or modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module in any direction.
(9) In the event that a Module must be put back into the packing container slot after it was taken out of the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the
CFL Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface
Connector of the TFT Module.
ViewSonic Corporation
1
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or
bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration
that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module
should be supplied with power that complies with the requirements of Limited Power Source
(IEC60950 or UL1950), or an exemption should be applied for.
(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950
or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.
ViewSonic Corporation
2
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Handing and Placing Methods
incorrect method
Take out the monitor by grasping the LCD
panel. That may cause “ MURA“.
correct method
Take out the monitor with cushion
Place the monitor on a clean & soft foam pad
could
scratch the surface of panel
Do not touch the surface of the polarizer .
Surface of the panel is pressed by fingers &
this may cause “ MURA “
ViewSonic Corporation
3
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
when assemble&disassembly
bezel
when assemble&disassembly
bezel
when assemble&disassembly
bracket
ViewSonic Corporation
when assemble&disassembly
bracket
4
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
2. Specificationtion
INTRODUCTION
FEATURES
TFTLCD PANEL
(QDI)
TFTLCD PANEL
(AUO)
M201EW01 V.0
Input Signal
Sync Compatibility
Compatibility
Power Voltage
Power Consumption
Audio
Ergonomics
OSD Control
Dimension
Weight
Operating Condition
Storage Condition
Regulation
ViewSonic Corporation
VA2012w/wb-1
20.1” WIDE
300 / 240 cd/㎡
600:1 / 400:1
16.2 M colors
8 /12 ms
140 ° / 125 °
1680 X 1050@60Hz
20.1” WIDE
300 / 240 cd/㎡
800:1 / 400:1
16.7 M colors
16 /40 ms
Response Time (Typ/Max)
G to G 8ms (ave)
Viewing Angle (H/V)
176° / 176 °
Recommend resolution
1680 X 1050@60Hz
Analog (75ohms, 0.7/1.0 Vp-p)
Yes
Digital
Yes
Separate Sync
Yes
Composite Sync
No
Sync on Green
No
PC
Yes
Power Mac
Yes
TV Box (NextVision 6)
Yes
AC 100-240V, 50/60Hz
Yes
On Mode(Max / Typ)
50 W / 47 W
Active Off Mode (Max)
<2W
1W
Yes
Yes
Tilt ( -5 ° 18 °)+/- 2 °
No
Swivel ( -135 ° - 135 °)
No
Pivot ( XX ° - XX °)
Height Adjust ( XX-XX mm)
No
Yes
[ ] [ 1 ] [ 2 ] [▲] [▼] [;+] [;-][;X]
Physical (W x H x D)
479 x 423 x 216mm
Package (W x H x D)
540 x 505 x 175mm
Physical (lbs / Kg)
5.5 / 12.1 Kg
Package (lbs / Kg)
7.0 / 15.4 Kg
Temperature (℉/℃)
32℉-104℉ / 0℃-40℃
Humidity (%)
20 % - 90 %
Temperature (℉/℃)
-4℉-140℉ / -20℃-60℃
Humidity (%)
5 % - 90 %
UL, cUL, FCC-B, CB, CE, NOM, TUV/GS, TUV ERGO (covers ISO13406-2 &
MPRII), TCO’03, GOST-R + 20 ORIGINAL COPIES HYGIENIC, SASO, PCBC,
BSMI, CCC, (PSB), (C-TICK), TUV-S, Green Mark, Energy Star, MIC, WEEE,
RoHS,
Size
Luminance (Typ/Min)
Contrast Ratio (Typ/Min)
Colors
Response Time (Typ/Max)
Viewing Angle (H/V)
Recommend resolution
Size
Luminance (Typ/Min)
Contrast Ratio (Typ/Min)
Colors
5
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
GENERAL specification
Test Resolution & Frequency
Test Image Size
Contrast and Brightness Controls
“1680 X 1050” @ 60Hz
Full Size
Factory Default:
Contrast = 70%, Brightness = 100%
VIDEO INTERFACE
Analog Input Connector
Digital Input Connector
Default Input Connector
Video Cable Strain Relief
Video Cable Connector DB-15 Pin out
Video Signals
Video Impedance
Maximum PC Video Signal
Maximum Mac Video Signal
Sync Signals
DDC 1/2B
Sync Compatibility
Video Compatibility
Resolution Compatibility
Exclusions
DB-15 (Analog), refer the appendix A
DVI-D (Digital), refer the appendix B
Defaults to the first detected input
Equal to twice the weight of the monitor for five
minutes
Compliant DDC 1/2B
1. Video RGB (Analog)
Separate
2. TMDS (Digital)
75 Ohms (Analog), 100 Ohms (Digital)
950 mV with no damage to monitor
1250 mV with no damage to monitor
TTL
Compliant with Revision 1.3
Separate Sync
Shall be compatible with all PC type computers,
Macintosh computers, and after market video cards
640 x 350, 640 x 480, 720 x 400 (640 x 400), 800 x
600, 832 x 624, 1024 x 768, 1280 x 720, 1280 x
1024, 1600 x 1200, 1680 x 1050
Not compatible with interlaced video
POWER SUPPLY
Internal Power Supply
Input Voltage Range
Input Frequency Range
Short Circuit Protection
Over Current Protection
Leakage Current
EFFICIENCY
Fuse
Power Dissipation
Max Input AC Current
INRUSH CURRENT (COLD START)
Power Supply Cold Start
Power Supply Transient Immunity
Power Supply Line Surge Immunity
ViewSonic Corporation
Part Number: EADP-64CF
90 TO 264 VAC
47.5 TO 63 HERTZ
Output can be shorted without damage
Output current <10A
3.5mA (Max) at 254VAC / 60Hz
80 % typical at 115VAC Full Load
Internal and not user replaceable
64 Watts (typ)
1.5 Arms @ 90VAC
80 A(max) @230VAC
Shall start and function properly when under full
load, with all combinations of input voltage, input
frequency, and operating temperature
Shall be able to withstand an ANSI/IEEE C62.411980 6000V 200 ampere ring wave transient test
with no damage
Shall be able to withstand 1.5 times nominal line
6
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Power Supply Missing Cycle Immunity
Power Supply Acoustics
US Type Power Cable
European Type Power Cable
Power Saving Operation(Method)
Power Consumption
Recovery Time
voltage for one cycle with no damage
Shall be able to function properly, without reset or
visible screen artifacts, when ½ cycle of AC power
is randomly missing at nominal input
The power supply shall not produce audible noise
that would be detectable by the user. Audible shall
defined to be in compliance with ISO 7779 (DIN
EN27779:1991) Noise measurements of machines
acoustics. Power Switch noise shall not be
considered
Separate 3-prong NEMA 5-15P type plug. Length =
1.8m. Connects to AC outlet. Color = Black
Schuko CEE7-7. Length = 1.8m, Connects to AC
outlet. Color = Black
VESA DPMS Signaling
ON Mode < 50 W (max) / 47 W (typ)
ACTIVE OFF < 2W
ON MODE = N/A, ACTIVE OFF < 3 SEC
ELECTRICAL REQUIREMENT
Horizontal / Vertical Frequency
Horizontal Frequency
Vertical Refresh Rate
Maximum Pixel Clock
Sync Polarity
ANALOG: 30 – 94 KHZ
DIGITAL : 30-82 KHZ
50 – 75 HZ.
Analog: 205 Mhz
Digital: 165 MHz
Independent of sync polarity.
Timing Table
Item
Timing
1.
640 x 350 @ 70Hz, 31.5kHz
2.
640 x 400 @ 70Hz, 31.5kHz
3.
640 x 480 @ 60Hz, 31.5kHz
4.
640 x 480 @ 67Hz, 35.0kHz
5.
640 x 480 @ 72Hz, 37.9kHz
6.
640 x 480 @ 75Hz, 37.5kHz
7.
720 x 400 @ 70Hz, 31.5kHz
8.
720 x 480 @59.94/60Hz 15.7 kHz
9.
720 x 576 @50Hz 31.25kHz
10.
720 x 576 @50Hz 15.62kHz
11.
800 x 600 @ 56Hz, 35.1kHz
12.
800 x 600 @ 60Hz, 37.9kHz
13.
800 x 600 @ 75Hz, 46.9kHz
14.
800 x 600 @ 72Hz, 48.1kHz
15.
832 x 624 @ 75Hz, 49.7kHz
16.
1024 x 768 @ 60Hz, 48.4kHz
17.
1024 x 768 @ 70Hz, 56.5kHz
18.
1024 x 768 @ 72Hz, 58.1kHz
19.
1024 x 768 @ 75Hz, 60.0kHz
20.
1280 X 720 @ 50Hz 37.5kHz
ViewSonic Corporation
Analog
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
7
Confidential - Do Not Copy
Digital
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
VA2012w-1_VA2012wb-1
21.
22.
23.
24.
25.
26.
27.
28.
1280x 720 @ 60Hz, 45kHz
1280 x 1024 @ 60Hz, 63.4kHz
1280 x 1024 @ 75Hz, 79.97kHz
1600 x 1200 @ 60Hz, 75kHz
1600 x 1200 @ 70Hz, 87.5kkHz
1600 x 1200 @ 75Hz, 93.8kHz
1680 x 1050 @ 60Hz, 65.3 kHz
1680 x 1050 @ 75Hz, 82.3 kHz
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Primary Presets
“1680 x 1050” @ 60Hz
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO
configuration
Changing Modes
● Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding
“Auto Adjust” time
● Under DOS mode (640 x 350, 720 x 400 & 640 x 400), it should recall factory setting
when execute “Auto Adjust”
● The monitor needs to do “Auto Adjust” the first time a new mode is detected
(see section “0-Touch™ Function Actions”)
● While running Change Mode, Auto Adjust or Memory Recall, the image shall blank
FRONT PANEL CONTROLS AND INDICATORS
Front Panel Hardware Controls
Power Switch (Front Head)
Power LED (Front Head)
Front Panel Controls (Head)
[ ] [ 1 ] [ 2 ] [▲] [▼] [;+][;-][;X]
Reaction Time
ViewSonic Corporation
Power Control, soft Power Switch.
Green – ON
Orange – Active Off
Dark = Soft Power Switch OFF
[ ] Power
[ 1 ] Button 1
[ 2 ] Button 2
[▲] Up arrow button
[▼] Down arrow button
[;+] Volume+
[;-] Volume[;X] Mute
Note: Power Button, Button 1, Button 2, and
Mute Button must be one-shot logic
operation. (i.e. there should be no cycling)
OSD must fully appear within 0.5s after
pushing Button 1
8
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
TFT LCD PANEL
Panel Characteristics :
1st Source Panel e
Type
Active Size
Pixel Arrangement
Pixel Pitch
GLASS TREATMENT
# OF BACKLIGHTS
BACKLIGHT LIFE
Luminance –
Condition:
CT = 6500K, Contrast = Max,
Brightness = Max
Brightness Uniformity
Contrast Ratio
Color Depth
Viewing Angle (Horizontal)
VIEWING ANGLE (VERTICAL)
Response Time
10%-90% @ Ta=25°C
Panel Defects
2nd Source Panel
Type
Active Size
Pixel Arrangement
Pixel Pitch
GLASS TREATMENT
# OF BACKLIGHTS
BACKLIGHT LIFE
Luminance –
Condition:
CT = 6500K, Contrast = Max,
Brightness = Max
Brightness Uniformity
Contrast Ratio
Color Depth
Viewing Angle (Horizontal)
VIEWING ANGLE (VERTICAL)
Response Time
10%-90% @ Ta=25°C
Panel Defects
ViewSonic Corporation
QDI QD20AL01
TN Technology”
433.44 (H) x 270.9 (V)
RGB Vertical Stripe
0.258 mm
Anti Glare (Hard coating 3H)
6 CCFL edge-light (3 top / 3 bottom)
40,000 Hours (Min)
300 cd/m2 (Typ after 30 minute warm up)
240 cd/m2 (Min after 30 minute warm up)
77 % Entire Area (typ)
600:1 (Typ), 400:1 (Min)
16.2 million colors (6 bit panel)
140 deg @ CR>10, 160 deg @ CR>5
125 deg @ CR>10, 140 deg @ CR>5
8 ms (Tr= 2 ms, Tf = 6 ms) (Typ)
16 ms (Tr= XXX ms, Tf = XXX ms) (Max)
Please see Panel Quality Specifications.
AUO M201EW01 V.0
MVA Technology”
433.44 (H) x 270.90(V)
RGB Vertical Stripe
0.258 mm
Anti Glare (Hard coating 3H)
6CCFL edge-light (3 top / 3 bottom)
50.000 Hours (Min)
300cd/m2 (Typ after 30 minute warm up)
240 cd/m2 (Min after 30 minute warm up)
75 % Entire Area (minimum)
800:1 (Typ), 4001 (Min)
16.7 million colors (8 bit panel)
176 deg (Typ), 150deg(Min) @ CR>10
176 deg (Typ), 150deg(Min) @ CR>10
16ms (Tr=11 ms, Tf = 5 ms) (Typ)
40 ms (Tr= 25ms, Tf = 15ms) (Max)
G to G 8ms (Average)
Please see Panel Quality Specifications.
9
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
IMAGE PERFORMANCE
Factory Defaults
Item
Contrast
Brightness
Volume
Color Temperature
Sharpness
OSD H. Position
Defaults
70%
100%
50%
6500K
1
50%
Display Size
Horizontal Display Size, Primary Preset
Vertical Display Size, Primary Preset
Saturation
Contrast = Default
Brightness = Default
TEST PATTERN = 32-GRAY
Contrast = 100%
Brightness = 100%
Test pattern = 32-gray
Item
OSD V. Position
OSD Time Out
OSD Background
OSD PIVOT
Resolution Notice
720x400/640x400
Defaults
50%
15 Sec
On
Off
Enabled
720x400
Full Screen
Full Screen
No visible saturation
6~8-level saturation
MECHANICAL
Dimension (Desktop)
Width
479 mm
Height
423 mm
Depth
216 mm
Monitor Weight
5.5 kg / 12.1 lbs
Dimension (Head Only / Wall Mount)
Width
479 mm
Height
350.5 mm
Depth
62.7 mm
Monitor Weight
4.9 kg / 10.78 lbs
Ergonomics
Tilt Up
20 degrees minimum
Tilt Down
-5 degrees
Swivel Right
N/A
Swivel Left
N/A
ViewSonic Corporation
10
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
IMAGE PERFORMANCE
Factory Defaults
Item
Contrast
Brightness
Volume
Color Temperature
Sharpness
OSD H. Position
Defaults
70%
100%
50%
6500K
1
50%
Display Size
Horizontal Display Size, Primary Preset
Vertical Display Size, Primary Preset
Saturation
Contrast = Default
Brightness = Default
TEST PATTERN = 32-GRAY
Contrast = 100%
Brightness = 100%
Test pattern = 32-gray
ViewSonic Corporation
Item
OSD V. Position
OSD Time Out
OSD Background
OSD PIVOT
Resolution Notice
720x400/640x400
Defaults
50%
15 Sec
On
Off
Enabled
720x400
Full Screen
Full Screen
No visible saturation
6~8-level saturation
11
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
3. Front Panel Function Control Description
ViewSonic Corporation
12
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Main Menu Controls
Adjust the menu items shown below by using the up and down buttons.
A. Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2]
button to obtain a sharper image.
NOTE: Auto Image Adjust works with most common video cards. If this function does not work on your LCD display,
then
lower the video refresh rate to 60 Hz and set the resolution to its pre-set value.
B. Contrast adjusts the difference between the image background (black level) and the foreground (white level).
C. Brightness adjusts the lamps current to control the screen brightness.
D. Input adjusts the Analogue or the Digital input source
E. Audio Adjust the volume increase or decrease and mute function
F.
Color Adjust provides several color options: preset color temperatures and Custom User Color which allows you to adjust red (R),
green (G), and blue (B). The factory setting for this product is 6500K (6500° Kelvin).
9300K — Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting).
5400K — Adds red to the screen image for warmer white and richer red.
Custom User Color — Individual adjustments for red, green, and blue.
1 To select color (R, G or B) press button [2].
2 To adjust selected color, press
or
.
3 When you are finished making all color adjustments, press button [1] twice.
G. Information displays the timing mode (video signal input) coming from the graphics card in your computer. See your graphic
card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). VESA 1280 x 1024 @ 60 Hz
(recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz.
H. Manual Image Adjust controls are explained below:
H. Size (Horizontal Size) adjusts the width of the screen image.
NOTE: Vertical size is automatic with your LCD display.
H./V. Position adjusts horizontal and vertical position of the screen image. You can toggle between Horizontal and Vertical by
pressing button [2]. Horizontal moves the screen image to the left or to the right. Vertical moves the screen image up and down.
Fine Tune sharpens focus by aligning the illuminated text and/or graphic characters.
Sharpness adjusts the clarity and focus of the screen image.
Setup Menu controls are explained below:
Language allows you to choose the language used in the menus and control screens.
Resolution Notice displays the recommended resolution for this LCD display.
Enable allows the Resolution Notice to appear on-screen.
Disable will not allow the Resolution Notice to appear on-screen.
OSD Timeout sets the length of time an on-screen display screen is displayed. For example,
with a“15 second” setting, if a
control is not pushed within 15 seconds, the display OSD disappears.
I.
OSD Position allows you to move the on-screen display menus and control screens.
J.
Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed
in this user guide.
ViewSonic Corporation
13
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
4. Circuit Description
1.
Outline
1.1 Power On/Off, (2) Enter button, up arrow button, down arrow button, (1) MENU button, Volume “+” button,
Volume “-“button and Mute button on the front panel.
1.2 D-sub 15pin connector, DVI-D connector, audio line-in receptacle, and AC-IN are located on the back side
of the cabinet.
1.3 OSD menu includes the following function;
Auto Image Adjust (only active under analog input)
Contrast/Brightness
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1.4 Contrast and Brightness can be directly controlled with UP / DOWN key.
1.5
Audio volume can be controlled with Volume “+” key ,Volume “-“ key and UP/DN key when Audio Adjust
menu is active.
1.6
2.
Pushing Mute key can disable audio output.
CONNECTORS
2.1 AC inlet : CEE22 typed connector
2.2 Audio : Line-in,
CN9
1
5
4
3
2
Line-in receptacle
(Line-in receptacle is green)
1
6
2
7
3
8
4
9
5
10
2.3 Video signal connector for analog input: 15P Mini D-Sub
CN6
DB15HD
16
15
14
13
12
11
17
PIN
MNEMONI
SIGNAL
1
RV
Red Video
2
GV
Green Video
3
BV
Blue Video
4
NC
None
5
GND
Ground
(DDC
return)
ViewSonic Corporation
6
RG
Red GND
7
GG
Green GND
8
BG
Blue GND
9
+5V
+5V (for DDC)
10
SG
Sync GND
11
NC
None
12
SDA
DDC Data
13
HS
Horizontal Sync
14
VS
Vertical Sync
15
SCL
DDC Clock
14
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
2.4
Video signal connector for digital input: 24pin DVI-D connector
CN9
RX2RX2+
GND
RX4RX4+
SCL
SDA
VS
RX1RX1+
GND
RX3RX3+
5V
GND
HP
RX0RX0+
GND
RX5RX5+
GND
RXC+
RXC-
Pin No.
3.
RX2-
TMDS negative differential input, channel 2
2
RX2+
TMDS positive differential input, channel 2
3
GND
Logic Ground
4
RX4-
Reserved. No connection
5
RX4+
Reserved. No connection
6
SCL
DDC2B Clock
7
SDA
DDC2B Data
8
VS
Reserved. No connection
9
RX1-
TMDS negative differential input, channel 1
10
RX1+
TMDS positive differential input, channel 1
11
GND
Logic Ground
12
RX3-
Reserved. No connection
13
RX3+
Reserved. No connection
14
+5V
Power
15
GND
Logic Ground
16
HP
SENSE Pin, Pull High
17
RX0-
TMDS negative differential input, channel 0
18
RX0+
TMDS positive differential input, channel 0
19
GND
Logic Ground
20
RX5-
Reserved. No connection
21
RX5+
Reserved. No connection
22
GND
Logic Ground
23
RXC+
TMDS positive differential input, reference clock
24
RXC-
TMDS negative differential input, reference clock
9
10
11
12
13
14
15
16
DVI-D
Description
1
1
2
3
4
5
6
7
8
17
18
19
20
21
22
23
24
Signal Name
ELECTRICAL SPECIFICATIONS
3.1 Standard conditions
Display Area
433.44 x 270.9 mm
Video Signal
0.7Vpp
Contrast
Default
Brightness
Default
Ambient
20 +/- 5 °C
Input
AC
Warming up
> 30 min
Display
1680 x 1050
ViewSonic Corporation
15
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
3.2 POWER
3.2.1
Power supply
Input voltage
100~240Vac
Power frequency
50~60Hz
Input current
3.2.2
<1.5Arms@90Vac
Inrush current
80A(Max) at 230Vac(cold start)
Power consumption
47W(typical);50Watts(Max)
Power Management
State
Power
Indicator
On
47Watts
Blue
Standby
< 2Watts
Amber
Off
<2Watts
Off
3.3 Acceptable timing
If the timing is within following specification, this LCD display can automatically function with a certain
position.
Horizontal: Sync frequency: 30~94 KHz (Analog), 30~82KHz (Digital)
Vertical: Sync frequency: 50~75*Hz
3.4 Signal level and input impedance
3.4.1
Video Signal level: 0.7Vp-p Video signal.
3.4.2
Sync Signal level
H/V Separate: TTL level
3.4.3
Input impedance
Analog video input: 75 ohm
Digital video input: 100 ohm
Sync input: > 1 k ohm
Audio input: 10K ohm
4. SIGNAL CABLE: Signal cable with Mini D-Sub 15P connectors at both ends.
ViewSonic Corporation
16
Length: 1.8 meter.
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
5. EDID data
5.1. Analog EDID: Analog EDID is stored in IC4
VA2012wb Analog:
Time: 08:44:23
Date:
Wed Sep 07, 2005
______________________________________________________________________
______________________________________________________________________
VIEWSONIC CORPORATION
EDID Version # 1,
Revision # 3
DDCTest For: ViewSonic VA2012wSERIES
______________________________________________________________________
______________________________________________________________________
EDID Block 0, Bytes 0-127
128 BYTES OF EDID CODE:
0
1
2
3
4
5
6
7
8
9
________________________________________
0
|
00
FF
FF
FF
FF
FF
FF
00
5A
63
10
|
1C
6A
01
01 01
01
01
0F
01 03
20
|
08
2B
1B 78
2E
C3
15
A6
56 4A
30
|
9B
24
16 50
54
BF
EF
80
B3
40
|
A9
40
90
40 90
4F
81
80
81 40
50
|
71
4F
A9
4F
21
39
90
30 62
1A
60
|
27
40
68 B0
36
00
B1
0F
11
00
70
|
00
1C
00 00
00
FF
00
50
56
57
80
|
30
35
30 31
30
30
30
30 31
0A
90
|
00
00
00 FD
00
32
4B
1E
100
|
00 0A
20
20
20
20
20
20 00
00
110
|
00 FC
00
56
41
32
30
31 32
77
120
|
53 45
52
49 45
53
00
BA
0F
5E
15
______________________________________________________________________
(08-09)
ID Manufacturer Name ________________
= VSC
(11-10)
Product ID Code _____________________
= 6A1C
(12-15)
Last 5 Digits of Serial Number ______
(16)
Week of Manufacture _________________
= 01
(17)
Year of Manufacture _________________
= 2005
(10-17)
Complete Serial Number ______________
= See Descriptor Block
(18)
EDID Version Number _________________
=1
(19)
EDID Revision Number ________________
=3
(20)
VIDEO INPUT DEFINITION:
= Not Used
Analog Signal
0.700, 0.300 (1.000 Vp-p)
Separate Syncs
(21)
Maximum Horizontal Image Size ________________
=
430 mm
(22)
Maximum Vertical Image Size __________________
=
270 mm
(23)
Display Gamma ________________________________
(24)
Power Management and Supported Feature(s):
=
2.20
Active Off/Very Low Power, Standard Default Color Space,
Preferred Timing Mode
ViewSonic Corporation
17
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Display Type = R/G/B Color
(25-34)
CHROMA INFO:
Red X - 0.651 Green X - 0.289 Blue X - 0.141 White X - 0.313
Red Y - 0.336 Green Y - 0.608 Blue Y - 0.087 White Y - 0.329
(35)
ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36)
ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
(37)
Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53)
Standard Timing Identification:
1680 X 1050 @75Hz
1600 X 1200 @60Hz
1400 X 1050 @60Hz
1400 X 1050 @75Hz
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
1600 X 1200 @75Hz
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1680x1050
Pixel Clock: 146.25 MHz
______________________________________________________________________
Horizontal Image Size: 433 mm
Vertical Image Size: 271 mm
Refreshed Mode: Non-Interlaced
Normal Display - No Stereo
Active Time: 1680 pixels
Blanking Time: 560 pixels
Sync Offset: 104 pixels
Sync Pulse Width: 176 pixels
Horizontal:
Border: 0 pixels
Frequency: 65.29 KHz
Vertical:
Active Time: 1050 lines
Blanking Time: 39 lines
Sync Offset: 3 lines
Sync Pulse Width: 6 lines
Border: 0 lines
Frequency: 59.95 Hz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (+)
ViewSonic Corporation
18
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
Monitor Serial Number:
PVW050100001
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 75 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 94 KHz
Pixel Clock
- 210 MHz
Secondary GTF - Not Supported
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VA2012wSERIES
(126)
No Extension EDID Block(s)
(127)
CheckSum OK
5.2. Digital EDID: Digital EDID is stored in IC4.
Appendix F : Digital EDID
VA2012wb
Time:
08:45:59
Date:
Wed Sep 07, 2005
______________________________________________________________________
______________________________________________________________________
VIEWSONIC CORPORATION
EDID Version # 1,
Revision # 3
DDCTest For: ViewSonic VA2012wSERIES
______________________________________________________________________
______________________________________________________________________
EDID Block 0, Bytes 0-127
128 BYTES OF EDID CODE:
0
1
2
3
4
5
6
7
8
9
________________________________________
0
|
00
FF
FF
FF
FF
FF
FF
00
5A
10
|
1C
6A
01
01 01
01
01
0F
01 03
20
|
80
2B
1B 78
C3
15
A6
ViewSonic Corporation
2E
63
56 4A
19
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
30
|
9B
24
16 50
54
BF
EF
80
B3
0F
40
|
A9
40
90
4F
90
40
81
80 81
40
50
|
71
4F
31
0A
21
39
90
30 62
1A
60
|
27
40
68 B0
36
00
B1
0F
11
00
70
|
00
1C
00 00
00
FF
00
50
56
57
80
|
30
35
30 31
30
30
30
30 31
0A
90
|
00
00
00 FD
00
32
4B
1E
100
|
00 0A
20
20
20
20
20
20 00
00
110
|
00 FC
00
56
41
32
30
31 32
77
120
|
53 45
52
49 45
53
01
0E
52
11
______________________________________________________________________
(08-09)
ID Manufacturer Name ________________
= VSC
(11-10)
Product ID Code _____________________
= 6A1C
(12-15)
Last 5 Digits of Serial Number ______
(16)
Week of Manufacture _________________
= 01
(17)
Year of Manufacture _________________
= 2005
(10-17)
Complete Serial Number ______________
= See Descriptor Block
(18)
EDID Version Number _________________
=1
(19)
EDID Revision Number ________________
=3
(20)
VIDEO INPUT DEFINITION:
= Not Used
Digital Signal
Non - VESA DFP 1.x Compatible
(21)
Maximum Horizontal Image Size ________________
=
(22)
Maximum Vertical Image Size __________________
=
(23)
Display Gamma ________________________________
(24)
Power Management and Supported Feature(s):
430 mm
270 mm
=
2.20
Active Off/Very Low Power, Standard Default Color Space,
Preferred Timing Mode
Display Type = R/G/B Color
(25-34)
CHROMA INFO:
Red X - 0.651 Green X - 0.289 Blue X - 0.141 White X - 0.313
Red Y - 0.336 Green Y - 0.608 Blue Y - 0.087 White Y - 0.329
(35)
ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36)
ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
ViewSonic Corporation
20
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
(37)
Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53)
Standard Timing Identification:
1680 X 1050 @75Hz
1600 X 1200 @60Hz
1400 X 1050 @75Hz
1400 X 1050 @60Hz
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
640 X 400 @70Hz
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1680x1050
Pixel Clock: 146.25 MHz
______________________________________________________________________
Horizontal Image Size: 433 mm
Vertical Image Size: 271 mm
Refreshed Mode: Non-Interlaced
Normal Display - No Stereo
Active Time: 1680 pixels
Blanking Time: 560 pixels
Sync Offset: 104 pixels
Sync Pulse Width: 176 pixels
Horizontal:
Border: 0 pixels
Frequency: 65.29 KHz
Vertical:
Active Time: 1050 lines
Blanking Time: 39 lines
Sync Offset: 3 lines
Sync Pulse Width: 6 lines
Border: 0 lines
Frequency: 59.95 Hz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (+)
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
Monitor Serial Number:
PVW050100001
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 75 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 82 KHz
Pixel Clock
- 170 MHz
Secondary GTF - Not Supported
ViewSonic Corporation
21
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VA2012wSERIES
(126)
Extension EDID Block(s): 1
(127)
CheckSum OK
Time:
Date:
08:45:59
Wed Sep 07, 2005
6. THEORY OF OPERATION
This section describes the function of the LCD monitor per functional block.
This monitor includes MB board, power board, Inverter board and button board.
6.1 MB BOARD
The MB board is a two-layer, single-landed. 12V DC power from the power adapter enters the board through
connector CN6. Other connectors on the board are for audio speaker and button board .The VGA cable is a signal
cable that contains video signal, sync signal and DDC signal from PC VGA adapter. This system board consists of
4 functional areas: flat panel controller, flash ROM, power regulator and Audio amplifier
6.1.1 Flat panel controller… NT68563HF (IC2)
The heart of the system board is the scalar chip of NT68563HF. The scaler is a highly integrated flat panel display
controller that interfaces analog, digital, and video inputs. It combines a triple ADC, a DVI compliant TMDS
receiver, a multi-color on screen display (OSD) controller and many other functions in a single chip. It provides
user a simple, flexible and cost-effective solution for various flat panel display products.
The NT68563HF operates at frequencies up to 205MHz (analog only), suitable for LCD monitor up to UXGA
resolution. The NT68563HF also build-in noise reduction function to provide more stable video quality, spread
spectrum to provide low EMI solution, sRGB for video color space convert, post pattern for manufacture test.
a)
Clock Generation:
This is the input pair to an internal crystal oscillator and corresponding logic. A 12.000 MHz crystal is
recommended.
b) Hardware Reset (Pin127):
Hardware Reset signal is provided by MCU (IC3), it is active high.
c)
Analog to Digital Converter:
The NT68563HF chip has triple ADC's (analog-to-digital converters), one for each color (red, green and
blue) .The analog RGB and synchronous signals are connected to NT68563 as described below:
Pin Name
Pin Number
Red +
25
Red -
26
Green +
23
Green -
24
Blue +
20
Blue -
21
H sync
39
V sync
40
ViewSonic Corporation
22
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
d) Internal OSD: Internal SRAM allows up to 2048 characters, with programmable OSD frame size. Width is
64 columns, and Height is 32 row.
e)
On chip TMDS receiver: The NT68563HF integrated TMDS receiver, which operates up to 165MHz and
can directly connect to all DVI compliant TMDS transmitters. The TMDS signals are connected to
NT68563HF as described bellow:
Pin Name
Pin NO.
TX0+
9
TX0-
8
TX1+
6
TX1-
5
TX2+
3
TX2-
2
TXC+
11
TXC-
12
6.1.2 Mcu flash ROM
This is an 8031 CPU core embedded micro-controller, which is design for high-performance low-cost LCD
monitor control application. It contains an 8-bit 8031 micro-controller, on-chip 64 K bytes flash-type program
ROM, 1,280-bytes internal data memory, four 7-bit resolution A/D Converter, 10-channel 8-bit resolution PWM
DAC, two 16-bit timer/counters, and a UART.
a)
PWM controlling function (Pin 8, Pin 9): The MCU 68F633 has two GPIO to control audio volume and
back light brightness.
b) Serial interface ports pin 25~26(DVI) and pin 27~28(VGA): This serial interface ports communicate with
MCU and support up to 400Kbit per second transmit rate.
6.1.2 Power Regulator AIC1563 (U1), AIC1117 (U3, U4, U5): The AIC1563 is a monolithic control IC
containing the primary functions required for DC-to-DC converters. The device consists of an internal
temperature compensated reference, comparator, controlled duty cycle.
Oscillator with an active current sense circuit, desired output voltage are determined by the equation,
Volt = 1.25 *(1 + R121 / R122), in this case, the output voltage are 5 Volts
AIC1117 (U3, U4, U5): The AIC1117 is a low dropout positive adjustable regulator with minimum of 800mA
output current capability.
So it is well suited for 3.3 V and 2.5 V Regulator.
U5 as a 1.8V regulator, desired output voltage are determined by the equation
Volt=1.25 x (1 + R90/R88) = 1.8
U3 as a 3.3V regulator, desired output voltage are determined by the equation
Volt=1.255 x (1+ R86/R85) = 3.3
U4 as a 3.3V regulator, desired output voltage are determined by the equation
Volt=1.255 x (1+ R89/R87) = 3.3
6.2 Audio Amplifier UTC TDA7496L (U9)
The TDA7496L is a stereo 2W+2W class AB power amplifier; Features of the TDA7496L include linear volume
control, Stand-by and mute functions.
6.3 Inverter Board
This is a specific inverter for VA2012 monitor 40W backlight which converters 20Vdc to drive 6 tubes cold
cathode fluorescent tubes. Electrical specification described as below.
ViewSonic Corporation
23
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
6.3.1 Inverter Electrical specification described as below.
INPUT
OUTPUT
Rated Input Voltage
20Vdc
Input Voltage Range
18.5~21.5Vdc
Input Current
<2A
Off state Input Power
<0.1W
On / off control Voltage
2~5.25 for on, 0~0.2 for off
Rated Output Strike-on Voltage
1500~2000Vrms
Rated Output Voltage
710Vrms at 6mA
Rated Output Frequency
40~50KHz
Rated Output Current
6~7mA
6.4 This is a general purpose AC / DC adapter which converter 90~240 Vac to a stabilized DC voltage 20V for
inverter and 12V for system board with rated output current of 4.16A
6.4.1 Power Electrical specification described as below.
INPUT
OUTPUT
Rated Input Voltage
90~264Vac, 47~63Hz
Operation Input Voltage
100~240Vac, 50~60Hz
Input Current
<1.5A@90Vac
Inrush Current
<80A @ 230Vac(Cold start)
Output Voltage Regulation
+/-5%
Output Ripple and Noise
300 mVp-p
Rated Output Current
<4.16A
Turn-on Delay
<3 seconds
ViewSonic Corporation
24
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
5. Adjusting Procedure
1.
Function test
(1) Test equipment
Color video signal and pattern generator (or PC with SXGV resolution)
(2) Test condition
Before function testing and alignment, the unit must warm up for at least 30 minutes under the
following conditions:
1. Room temperature
2. With full-white screen , RGB , black pattern
3. with cycled display modes.
2.
Test display modes
Item
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Timing
640 x 350 @ 70Hz, 31.5kHz
640 x 400 @ 70Hz, 31.5kHz
640 x 480 @ 60Hz, 31.5kHz
640 x 480 @ 67Hz, 35.0kHz
640 x 480 @ 72Hz, 37.9kHz
640 x 480 @ 75Hz, 37.5kHz
720 x 400 @ 70Hz, 31.5kHz
720 x 480i 59.94/60Hz @ 15.7 kHz
720 x 576p 50Hz @ 31.25kHz
720 x 576i 50Hz @ 15.62kHz
800 x 600 @ 56Hz, 35.1kHz
800 x 600 @ 60Hz, 37.9kHz
800 x 600 @ 75Hz, 46.9kHz
800 x 600 @ 72Hz, 48.1kHz
832 x 624 @ 75Hz, 49.7kHz
1024 x 768 @ 60Hz, 48.4kHz
1024 x 768 @ 70Hz, 56.5kHz
1024 x 768 @ 72Hz, 58.1kHz
1024 x 768 @ 75Hz, 60.0kHz
1280x720p 50Hz @ 37.5kHz
1280x 720 @ 60Hz, 45kHz
1280 x 1024 @ 60Hz, 63.4kHz
1280 x 1024 @ 75Hz, 79.97kHz
1600 x 1200 @ 60Hz, 75kHz
1600 x 1200 @ 70Hz, 87.5kkHz
1600 x 1200 @ 75Hz, 93.8kHz
1680 x 1050 @ 60Hz, 65.3 kHz
1680 x 1050 @ 75Hz, 82.3 kHz
1920 x 1080i @ 50Hz, 56.5kHz
1920 x 1080p @ 50Hz, 62.5kHz
ViewSonic Corporation
Analog
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
25
Confidential - Do Not Copy
Digital
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
Yes
Yes
VA2012w-1_VA2012wb-1
3.
Test pattern
Item
1
Test condition
Frequency & performance
Pattern
Cross-hatch pattern
2
Monitor saturation
16-gray scale pattern
3
RGB color performance
RGB color
4
Sub-pixel defect
RGB color
5
Full white
Full white
6
7.
8.
Full black
5-cycle pattern
1-dot pattern
Full black
5-cycle pattern
1-dot pattern
Specification
No noise is allowed, all colors must
be clear
3 to 4 levels must be saturated when
brightness and contrast are set to
100%
Check the color temperature of
RGB signal color
Check the sub-pixel defect
Check the brightness and contrast
ratio, and check for bright pixel
defects
Pattern2
Pattern 3
Pattern4
26
Pattern 2
Pattern 3,
4, 5
Pattern 3,
4,5
Pattern 6
Pattern 7
Pattern 8
Pattern 9
Check the BU
Check the flicker
Pattern 1
ViewSonic Corporation
Remark
Pattern 1
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Pattern 5
Pattern6
Pattern 7
Pattern 8
Pattern 9
ViewSonic Corporation
28
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
OSD Function Menu
A. When in Analog Input Mode
1. Main Menu
Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.
(1) Auto Image Adjust Page:
Press the [2] button to execute the auto image adjust function.
Press the [1] button to exit the page.
(2) Contrast/Brightness Page:
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
1) Contrast Item
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.
2) Brightness Item
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
(3) Input Select Page:
Press the [2] button to switch to digital input mode.
(4) Audio Adjust Page:
Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .
Press the [1] button to exit the page.
(5) Color Adjust Page:
Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) sRGB Item
2) 9300K Item
3) 6500K Item
4) 5400K Item
Press the [2] button to select the currently highlighted item.
Press the [1] button to exit the currently highlighted item.
5) User Color Item
Press the [2] button to enter the user color page.
Press the [1] button to exit the page.
ViewSonic Corporation
27
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Red, Green, Blue Options:
Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.
Press the [▼] button to decrease the selected color level.
(6) Information Page:
Press the [2] button to enter the information page.
Press the [1] button to exit the information page.
(7) Manual Image Adjust Page:
Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) H./V. Position Item
Press the [2] button to enter the horizontal/vertical postion adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position:
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the image to the right.
Press the [▼] button to shift the image to the left.
b) Vertical Position:
Press the [2] button to return to the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the image upward.
Press the [▼] button to shift the image downward.
2) Horizontal Size Item
Press the [2] button to enter the horizontal size adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to make the image wider.
Press the [▼] button to make the image narrower.
3) Fine tune Item
Press the [2] button to enter the fine tuning page.
Press the [1] button to exit the page.
Press “[▲]” Button to adjust character position in one direction.
Press “[▼]“Button to adjust character position in the other direction.
4) Sharpness Item
Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.
(8) Setup Menu Page:
Press the [2] button to enter the setup menu page.
ViewSonic Corporation
27
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) Language Select Item
Press the [2] button to enter the language selection page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
English, French… Option
Press the [2] button to select the language.
Press the [1] button to exit the page.
2) Resolution Notice Item
Press the [2] button to enter the resolution notice page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
3) OSD Position Item
Press the [2] button to enter the OSD position adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position Option
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu to the right.
Press the [▼] button to shift the menu to the left.
b) Vertical Position Option:
Press the [2] button to enter the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu upward.
Press the [▼] button to shift the menu downward.
4) OSD Time Out Item
Press the [2] button to enter the OSD time out adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to increase the OSD time out.
Press the [▼] button to decrease the OSD time out.
5) OSD Background Item
Press the [2] button to enter the OSD background selection page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
ViewSonic Corporation
30
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
(9) Memory Recall Page
Press the [2] button to execute the memory recall function.
Press the [1] button to exit the page.
2. Other Menu:
This “shortcut” menu is directly accessible without bringing up the OSD.
(1) Contrast Dialog
Press the [▲] or [▼] button to enter the Contrast Dialog.
Press the [1] button to exit the Contrast Dialog.
Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
(2) Brightness Dialog
Press the [▲] or [▼] button to enter the Brightness Dialog.
Press the [1] button to exit the Brightness Dialog.
Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
(3) Analog/Digital Dialog
Press the [2] button to toggle between analog and digital modes.
B. When in Digital Input Mode
1.
Main Menu
Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.
(1) Auto Image Adjust Page:
Press the [2] button to execute the auto image adjust function.
Press the [1] button to exit the page.
(2) Contrast/Brightness Page:
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
1) Contrast Item
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.
2) Brightness Item
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
ViewSonic Corporation
31
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
(3) Input Select Page:
Press the [2] button to switch to analog input mode.
(4) Audio Adjust Page:
Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .
Press the [1] button to exit the page.
(4) Color Adjust Page:
Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) sRGB Item
2) 9300K Item
3) 6500K Item
4) 5400K Item
Press the [2] button to select the currently highlighted item.
Press the [1] button to exit the currently highlighted item.
5) User Color Item
Press the [2] button to enter the user color page.
Press the [1] button to exit the page.
Red, Green, Blue Options:
Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.
Press the [▼] button to decrease the selected color level.
(5) Information Page:
Press the [2] button to enter the information page.
Press the [1] button to exit the information page.
(6) Manual Image Adjust Page:
Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) Sharpness Item
Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.
(7) Setup Menu Page:
Press the [2] button to enter the setup menu page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
ViewSonic Corporation
32
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
1) Language Select Item
Press the [2] button to enter the language selection page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
English, French… Option
Press the [2] button to select the language.
Press the [1] button to exit the page.
2) Resolution Notice Item
Press the [2] button to enter the resolution notice page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
3) OSD Position Item
Press the [2] button to enter the OSD position adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position Option
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu to the right.
Press the [▼] button to shift the menu to the left.
b) Vertical Position Option:
Press the [2] button to enter the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu upward.
Press the [▼] button to shift the menu downward.
4) OSD Time Out Item
Press the [2] button to enter the OSD time out adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to increase the OSD time out.
Press the [▼] button to decrease the OSD time out.
5) OSD Background Item
Press the [2] button to enter the OSD background selection page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
(8) Memory Recall Page
Press the [2] button to execute the memory recall function.
ViewSonic Corporation
33
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Press the [1] button to exit the page.
2.
Other Menu:
This “shortcut” menu is directly accessible without bringing up the OSD.
(1) Contrast Dialog
Press the [▲] or [▼] button to enter the Contrast Dialog.
Press the [1] button to exit the Contrast Dialog.
Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
(2) Brightness Dialog
Press the [▲] or [▼] button to enter the Brightness Dialog.
Press the [1] button to exit the Brightness Dialog.
Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
(3) Analog/Digital Dialog
Press the [2] button to toggle between analog and digital modes.
C. Other Information
When the “No Signal” or “Out of Range” messages appear:
If no input signal is detected, the “No Signal” message will appear in the center of
the screen.
If the V-Sync signal rate is greater than than 85Hz or its resolution is greater than
SXGA, the “Out of Range” message will appear in the center of the screen.
Activating Factory Mode and Burn Mode:
While the device is in standby, press the [2] button, then press the power button to
enter Factory Mode. While Factory Mode is active, an additional menu page titled
“Factory Menu” will be accessible. Press the [2] button to enter the Factory Menu
page, then press the [2] button to enter Burn Mode.
When Installing a New Main Board
1. Enter Factory Mode.
2. Use a PC or chrom to send a 32-tone gray scale signal to the monitor.
3. Select “Auto Color”
ViewSonic Corporation
34
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Firmware updates procedure:
When you received a received monitor , please check whether the firmware version.
procedure to upgrade to the latest version .
If not , please following
1. Equipment needed :
- VA2012w/b
- PC ( Personal computer )
- LPT cable
- Fixture (LM5ISP)
- Firmware upgrade program
ViewSonic Corporation
35
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
2. Connection :
To PC
To Monitor
Appendix A : How to install the software for ISP :
0. To setup ISP environment :
Hardware:
PC or notebook, parallel(printer) cable, ISP tooling.
Software:
If OS was Win2000 or WinXP , please install “PORT95NT.exe”
In order to ensure can execute ISP program, please set BIOS in PC or Notebook as Fig 0.0
Fig 0.0
ViewSonic Corporation
36
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
0.1 Double-click the “ PORT95NT.exe” in Windows & install the program. , see Fig 0.1
Fig 0.1
0.2 Keep on press “ Next “ 4 times to go through the installation processes, see Fig. 0.2
Fig. 0.2
ViewSonic Corporation
37
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
0.3 Choose “ Typical “ then press “ Next “ , see Fig. 0.3
Fig. 0.3
0.4 Keep on press “ Next “ 4 times to go through the installation processes, see Fig. 0.4
Fig. 0.4
ViewSonic Corporation
38
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
0.5 Install completed , restart the PC or notebook. See Fig 0.5
Fig. 0.5
1. Install ISP
1.1 User could download ISP driver and PORT95NT install from Myson Century website (www.myson.com.tw )
1.2 After extracting the ZIP file , the total files list as Fig 1.0 , and double click the file of setup.exe to install.
Fig 1.0
ViewSonic Corporation
39
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
1.3 Press “ Next “ button to continue., see Fig 1.1
Fig 1.1
1.4 Keep default setting or press “ Change “ button for selecting
“ button to continue , see Fig 1.2
the path that you want , and then press “ Next
Fig 1.2
ViewSonic Corporation
40
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
1.5 Press “ Install “ button to continue , see Fig 1.3
Fig. 1.3
1.6 Installation has finished , press “ Finish “ button , see Fig 1.4
Fig. 1.4
ViewSonic Corporation
41
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Appendix B : How to use software to upgrade the BIOS :
2.1 After installation , we could find the shortcut in the setting path or the program bar ( default setting ) , see Fig 2.1
Fig. 2.1
2.2 Security file is a key to use ISP function , press “ OK “ button , see Fig 2.2
Fig. 2.2
2.3 The warning is used to remind user of that different CPU rate may cause ISP function fail. (it’s limited by IIC
protocol ) , press “ OK “ button , see Fig 2.3
Fig. 2.3
ViewSonic Corporation
42
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
2.4 Press “ Create Security File “ button to key in Security code . Adjusting bar to decrease speed of IIC bus ,
See Fig. 2.4 .
Fig. 2.4
2.5 Fig 2.5 shows the setting for security code of software ISP . it needs 2 command No. and key in command
sequentially for 7C , 4C , 77. The command No. and command must be set by user while coding. About the detailed
of setting , please refer to section 6 boot code of ISP .
Fig. 2.5
ViewSonic Corporation
43
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Appendix C : Use ISP to program MCU
3.1
Select MTV type first , load the binary or intel hex file that you want to program into the MCU , and select
“ AUTO” item , then press “ RUN “ button , see fig3.1
Fig. 3.1
3.2
3.3
If user change the MTV type , it must load file again , or the buffer of load file will be cleared .
CRC ( cyclic redundancy check ) : the host can check CRC register’s result instead of reading every byte
in flash. The message of Check MCU CRC OK means that the host verify OK for the progress of
program , see Fig.3.2
Fig. 3.2
ViewSonic Corporation
44
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
dis-assembly procedure
take out LCD(1)
put lcd on the desk with sponge(2)
unlade I/o cover(3)
unlock stand screw(4)
Open back cover(5)
tear off AL FOIL(6)
ViewSonic Corporation
45
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
pull out CCFT CABLE(7)
unlock shielding screw(8)
tear off yellow tape and pull out lvds cable(9)
tear off yellow tape(10)
unlock button/b screw(11)
pull out button/b cable from button/b connector(12)
ViewSonic Corporation
46
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
unlade speaker (13)
take down shielding(14)
tear off AL FOIL(15)
tear off mylar and rubber(16)
unlock bkt L/R screw(18)
unlock bezel screw(17)
ViewSonic Corporation
47
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
unlock pcb'a screw and reclaim mylar(19)
take out pcb'a(20)
pull out cable from pcb'a(21)
ViewSonic Corporation
48
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Packing for shipping procedure
packing method
(1) stick lcd film
(4) put lcd in carton
stick
1-1
1-2
Front of PANEL
(2) cover PE BAG
(5) put cable&base&manual&assemble handle
handle
manual
VGA&DVI
CABLE
manual
VGA&DVI
CABLE
(3) assemble END CAP R/L
base
(6) accessories check&cover carton
ViewSonic Corporation
49
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
6. Troubleshooting Flow Chart
No Power
No Power
Check CN6 pin 1,2
Change power
12V correct?
board
Check U4,U3 pin2
Change U3,U4
3.3V correct?
Check U5 pin 2
Change U5
1.8V correct?
Check Y1
Change Y1
frequency 12MHz
Change M/B
ViewSonic Corporation
50
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
No Audio
No Audio Output
OK
NO
Check input signal
J1 OK?
Check input source
or change J1
OK
Check CN7 to
NO
Change speaker
NO
Change power
board module
NO
Change Q7
NO
Change U6
speaker OK?
OK
Check CN6 pin 1,2
12V correct?
OK
Check U6 pin 6
Volume and Q7
OK
Check U6
pin12(mute),p11(stby)
OK
Change M/B
ViewSonic Corporation
51
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Display color abnormal
Display color abnormal
NO
Check panel cable?
Change panel cable
OK
NO
Check open/short
of IC2?
Repair open/short
OK
NO
Check panel power
supply of Q4
Change Q4
OK
NO
Check panel
Change panel
OK
Change M/B
ViewSonic Corporation
52
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
7. Recommended Spare Parts List
RECOMMENDED SPARE PARTS LIST (VA2012w-1)
ViewSonic Model Number: VS10859
Serial No. Prefix: PXC
Item
1 Accessories:
2
3 Board Assembly:
4
5
6
7
8
9
10
11 Cabinets:
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Cables:
Documentation:
Electronic
Components:
Hardware:
Miscellaneous:
Packing Material:
Plastics:
Description
Power cable
Power cable
Inverter board
Main Board
main board
Power board
Inverter board
main board
Button board
Rev: 1b
ECR/ECN
ViewSonic P/N
A-00003642
A-PC-0106-0224
B-00004143
B-00004144
B-00004144
B-00004145
B-00005205
B-00006100
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Updated Vendor Part #
on 06/09/06
Back Cover Assy
Base Assy
Front Bezel Assy
Front bezel assy
HINGE COVER
VGA cable
Audio cable
Cable MB-BB
Cable MB-INV
Cable MB-LCD
Audio cable
User manual + CD wizard
20"W QDI TFT LCD panel
Speaker assy
20"AUO M201EW01 V.0 GP
LCD Panel 20" QDI QD20AL01 REV.01 A- GP
LCD 20" M201EW01 V.0 FOR VSC CON GP
Screw F 3.0*4.0-I(MC) GP
Screw F4.0*14-I(BNI) GP
Screw M3.0*6, B(NI) GP
LCD film
RUBBER PLUG VESA
EPE bags
Craft Box
End cap (L)
End cap (R)
Generic Box
Generic Foam Set
Stand assy
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Added on 06/15/06
Location
C-00004146
C-00004147
C-00004148
C-00006101
C-00006104
CB-00002602
CB-00004149
CB-00004150
CB-00004151
CB-00004152
CB-00005211
DC-00004153
E-00004154
E-00004155
E-00005214
E-00006102
E-00006103
HW-00004156
HW-00004157
M-SCW-0824-0813
M-00004158
M-MS-0808-9815
P-00004159
P-00004160
P-00004161
P-00004162
P-00002515
P-00001347
PL-00004163
EBW0VA03020
DDL7VDPC005
DD0L0TPC007
DDW0VABU007
DD0W0EIV008
DD0L9VLC023
DDW9ZAPA009
HGW0VA01013
AA20AL01004
DN0TE130F01
AAM201EW007
AA20AL01012
AAM201EW058
MF30040IJB3
MF40140IJ29
MF30060BBJ6
JXW0ZB01019
GAL9V002014
HAL0T002019
HFW0VA03015
HBW0VA01019
HBW0VA02015
20653
30833
26W0VASA016
B-00004142
Added on 06/15/06
Ref. P/N
DM33T181004
DM333181G97
AS022360D18
21W0VAMB002
1SW0VAMB009
AS08B532009
AS023360D18
1SW0VAMB025
23W0VABB009
1SW0VABB003
25W0VALC015
38W0VABS010
24W0VALB018
34W0VALB018
Universal number#
Q'ty
Power cable
Power cable
Inverter board
Main board
Main board for QDI
Power board
Inverter board
W0VA M/B for AUO
1
1
1
1
1
1
1
1
Button board
back cover assy
base assy
front bezel ass'y
front bezel ass'y
HINGE COVER W0VA
(EBW0VA03,R3A)BK GP
VGA cable
Audio cable
Cable MB-BB
Cable MB-INV
Cable MB-LCD
Audio cable
User manual
LCD panel
speaker assy
LCD panel
LCD panel
LCD panel
Screw
Screw
Screw
LCD FILM
RUBBER PLUG VESA
EPE bags
carton
cushion
cushion
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
7
10
1
4
1
1
1
1
Stand ASSY
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate repeated
cross checks of each item between this version and prior versions.
RECOMMENDED SPARE PARTS LIST (VA2012wb-1)
ViewSonic Model Number: VS10859-1W
Rev: 1b
Serial No. Prefix: PVW
Item
1
2
3
4
5
6
8
9
10
11
12
13
14
15
Accessories:
Board Assembly:
Main board
Power board
main board
Button board
Cabinets:
Front bezel assy
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Description
Power cable
Power cable
Inverter board
Cables:
Documentation:
Electronic
Components:
Hardware:
Miscellaneous:
Packing Material:
Plastics:
ECR/ECN
Added on 06/16/06
Update vendor part #
2006/5/12
B-00004144
B-00004145
B-00006100
Added on 06/16/06
Update vendor part #
2006/6/9
Update vendor part #
2006/6/9
back cover assy
base assy
base assy
Added on 06/16/06
HINGE COVER
Added on 06/16/06
VGA cable
Audio cable
Cable MB-BB
Cable MB-INV
Cable MB-LCD
Audio cable
User manual + CD wizard
20"W QDI TFT LCD panel
Speaker assy
Speaker assy
20"AUO M201EW01 V.0 GP
20" QD20AL01 REV.01 A- GP
LCD 20" M201EW01 V.0 FOR VSC CON GP
Screw F 3.0*4.0-I(MC) GP
Screw F4.0*14-I(BNI) GP
Screw M3.0*6, B(NI) GP
LCD film
RUBBER PLUG VESA
EPE bags
End cap (L)
End cap (R)
Carton
Stand assy
ViewSonic P/N
A-00003642
A-PC-0106-0224
B-00004143
Added on 06/16/06
Added on 06/16/06
Added on 06/16/06
Added on 06/16/06
Added on 06/16/06
B-00004142
C-00004166
C-00004164
C-00004165
C-00004165
Ref. P/N
DM33T181004
DM333181G97
AS022360D18
21W0VAMB002
1SW0VAMB009
AS08B532009
1SW0VAMB025
23W0VABB009
1SW0VABB003
24W0VALB000
34W0VALB000
25W0VALC007
38W0VABS001
38W0VABS001
Location
Universal number#
Power cable
Power cable
Inverter board
Main board for QDI
Power board
W0VA M/B for AUO
Q'ty
1
1
1
1
1
1
1
1
Button board
front bezel ass'y
1
back cover assy
base assy
base assy
1
1
1
C-00005750
EBW0VA03011
HINGE COVER
W0VA(EBW0VA03,REV3A)GP
CB-00002602
CB-00004149
CB-00004150
CB-00004151
CB-00004152
CB-00005211
DC-00004153
E-00004154
E-00004155
E-00004155
E-00005214
E-00006102
E-00006103
HW-00004156
HW-00004157
M-SCW-0824-0813
M-00004158
M-00006097
P-00004159
P-00004161
P-00004162
P-00004167
PL-00004168
DDL7VDPC005
DD0L0TPC007
DDW0VABU007
DD0W0EIV008
DD0L9VLC023
DDW9ZAPA009
HGW0VA01013
AA20AL01004
DN0TE130F01
DN0TE130F01
AAM201EW007
AA20AL01012
AAM201EW058
MF30040IJB3
MF40140IJ29
MF30060BBJ6
JXW0ZB01019
GAW0VA02014
HAL0T002019
HBW0VA01019
HBW0VA02015
HFW0VA01012
26W0VASA008
VGA cable
Audio cable
Cable MB-BB
Cable MB-INV
Cable MB-LCD
Audio cable
User manual
LCD panel
speaker assy
speaker assy
LCD panel
LCD panel
LCD panel
Screw
Screw
Screw
LCD FILM
RUBBER PLUG VESA
EPE bags
cushion
cushion
carton
Stand ASSY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
7
10
1
1
1
1
1
1
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate
repeated cross checks of each item between this version and prior versions.
ViewSonic Corporation
53
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
BOM LIST (VA2012w-1)
ViewSonic Model Number: VS10859
Rev.: 1b
Serial No. Prefix: PXC
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
ViewSonic P/N
N/A
B-00004144
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Ref. P/N
1LW0VAXVS72
21W0VAMB002
31W0VASS008
DFDS15FR041
DFDS15FR076
DFDI30FR022
DFDI30FR103
DFHD11MR001
DFHD30MR267
DFHD08FR102
DFHD04MR132
CC647T1MD05
CC71004MD09
Description
W0VA LCD MONITOR(USA)S/B GP
W0VA M/B ASSY (NOVATEK 68563) GP
W0VA M/B S/S ASSY (NOVATEK 68563) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN DVI-I DIP30P 3R FR(P1.905 H10.04)GP
CONN DVI-I DIP30P 3R FR(P1.905,H10.04)GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
CONN DIP HEADER 30P 2R MR(P2.0,H4.0) GP
CONN DIP HEADER 8P 2R FR(P2.54,H5.0) GP
CONN DIP HEADER 4P 1R MR(P2.0,H4.1) GP
CAP EC 47U 10V(+-20%,105C,5*11,2000H)GP
CAP ELEC DIP 100U 25V(+-20%,105C,6*7) GP
14
N/A
CC73303MD69
CAP ELEC DIP 330U 16V(+-20%,105C,8*9) GP
15
16
17
18
19
20
21
22
23
24
N/A
N/A
N/A
N/A
N/A
N/A
B-00004142
N/A
N/A
N/A
CC810T1MD05
BG612000202
DFTJ05FR037
DC04725K011
AL007496D02
AL007496D29
23W0VABB009
DAW0VATB218
BEYG0014DA0
DFHD11MR001
CAP EC 1000U6.3V(+-20%,105C,8*11.5) GP
XTAL DIP 12MHZ(+-30PPM,HC-49/S TYPE) GP
CONN DIP PHONE JACK 5P FR(J303-1-A-G+)GP
CHOKE COIL 47UH(2.5A,+-10%,T07473 GP) GP
IC(20P) TDA7496L(DIP) GP
IC(20P) UTC TDA7496LK(DIP) GP
W0VA BUTTON/B ASSY GP
PCB(BUTTON)TB(2L,242*12,REVA)W0VA GP
LED(DIP) YELLOW/GREEN(L-3WYGW-F01) GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
25
PL-BT-0706-0127
DHP0002B108
SWITCH PUSH BUTTON(PT-002-B1,50MA,12V)GP
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
B-00004145
B-00005205
N/A
C-00006101
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6761
N/A
M-SCW-0824-0813
M-MS-0808-8986
M-SCW-0824-0814
N/A
N/A
CB-00002525
CB-00004152
CB-00004150
CB-00004151
E-00004155
M-SCW-0824-6802
M-SCW-0824-0726
N/A
N/A
N/A
C-00004146
N/A
M-MS-0808-9411
C-00005442
PL-00004163
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
N/A
C-00006104
M-MS-0808-9815
N/A
N/A
N/A
E-00005214
E-00006103
N/A
N/A
N/A
N/A
N/A
C-00004147
CB-00002602
CB-00005211
M-MS-0808-9158
AS08B532009
AS023360D18
24W0VALB051
34W0VALB018
36W0VAPS006
FAW0VA02014
FAW0VA03011
GBL9C001016
FCL70007019
FCM7T004014
MM30030IBJ4
MF30040BJB9
MF30060BBJ6
MBLI1004018
MM30060BBJ3
MS35080B456
FCL7TA03011
DD0L9VLC015
DD0L9VLC023
DDW0VABU007
DD0W0EIV008
DN0TE130F01
MM30040IBJ9
MF30080BBJ5
ME26060BJ21
FCW0VA02016
FCW0VA03012
25W0VALC015
EAW0VA02022
FBL70008014
FBW0VA01019
26W0VASA016
EAW0VA03029
EAW0VA05021
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
27W0VACS014
EBW0VA03020
GAL9V002014
ME40200PJ28
MM40100BL61
2AW0VAPTA05
AAM201EW007
AAM201EW058
AZW0VA0BA07
FBW0VA05014
HGW0VA06015
2AW0VAPTQ01
28W0VAPK011
38W0VABS010
DDL7VDPC005
DDW9ZAPA009
HAL7V002019
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
W0VA LCD BEZEL ASSY(S/B,FOR AUO) GP
W0VA LCD BEZEL SUB ASSY (S/B) GP
W0VA PCB SHIELDING ASSY GP
LCD BKT-L W0VA(FAW0VA02,REV3A)GP
LCD BKT-R W0VA(FAW0VA03,REV3A)GP
PANEL SPONGE L9C(GBL9C001,REV3A)GP
MYLAR SCALAR/LCD L70L-A(FCL70007,R3A)GP
AL FOIL M7T(FCM7T004,REV3A) GP
SCREW M3*3-I-NI GP
SCREW F3.0*4.0-B(BNI)GP
SCREW F3.0*6-B(NI)GP
IO NUT LI1(MBLI1004,REV3A)GP
SCREW M3.0*6,B(NI) GP
SCREW F3.5*8-B(NI)(WASHER)GP
AL-(50*25) L7TA(FCL7TA03,REV3B)GP
CABLE MB-LCD(30P,140MM)L9V-5 GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
SCREW M3.0*4.0-I(NI) GP
SCREW F3.0*8L,B,NI GP
SCREW M2.6*6.0-B(BNI) GP
POWER MYLAR-DOWN W0VA(FCW0VA02,REV3B) GP
INVETER MYLAR-DOWN W0VA(FCW0VA03,R3B) GP
W0VA LCD COVER ASSY (S/B) GP
LCD COVER W0VA(EAW0VA02,R3B)BKGP
LOCK METAL L70B(FBL70008,REV3A) GP
HINGE-PLATE W0VA(FBW0VA01,REV3A)GP
W0VA STAND ASSY (S/B) GP
STAND FRONT W0VA(EAW0VA03,R3A)BK GP
STAND-BACK W0VA(EAW0VA05,R3A)BK GP
HINGE ASSY W0VA(FAW0VA04,REV3A)GP
CONTACT-PLATE W0VA(FBW0VA02,REV3A)GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM)L7TA GP
SCREW F4.0*8-I(NI)GP
W0VA CHASSIS ASSY S/B GP
HINGE COVER W0VA(EBW0VA03,R3A)BK GP
RUBBER PLUG VESA L9V(GAL9V002,REV3A)GP
SCREW T4.0*20.0-P(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
W0VA PANEL DEPENDENT KIT ASSY(AUO) GP
LCD(TFT)20" M201EW01 V.0 GP
LCD 20" M201EW01 V.0 FOR VSC CON GP
W0VA-A SW BIOS(NOVATEK,W/AUDIO)FOR AUO
PANEL HOOK W0VA(FBW0VA05,REV3A)GP
CD+QSG(AU_V03) W0VA-A(HGW0VA06,REV3A)GP
W0VA PANEL DEPENDENT KIT ASSY(QDI) GP
W0VA PACKING ASSY (S/B) GP
W0VA BASE SUB ASSY (S/B) GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
EPE BAG L7VX(HAL7V002,REV3A) GP
ViewSonic Corporation
54
Location
CN1
CN1
CN2
CN2
CN3
CN4
CN6
CN7
C36
C68,C69,C70,C71
C30,C46,C53,C66,C67,C
74,C76,C80,C82
C60
Y1
J1
L14
U6
U6
LED1
CN1
SW1,SW2,SW3,SW4,S
W5,SW6,SW7,SW8
Confidential - Do Not Copy
Universal number#
Q'ty
1
1
1
1
1
1
1
1
1
1
1
4
9
1
1
1
1
1
1
1
1
1
1
8
1
1
1
1
1
1
1
1
1
2
6
4
10
4
1
1
2
1
1
1
1
1
4
2
3
1
2
1
1
1
1
1
1
1
1
1
7
1
1
1
1
4
2
4
1
1
1
1
2
1
1
1
1
1
1
1
VA2012w-1_VA2012wb-1
Item
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
ViewSonic P/N
P-00004161
P-00004162
M-LB-0813-0747
N/A
M-LB-0813-0745
M-LB-0813-1042
P-00004160
N/A
PL-00005198
M-00004158
M-LB-0813-1043
N/A
N/A
DC-00003536
A-PC-0106-0224
CB-00003440
N/A
Ref. P/N
HBW0VA01019
HBW0VA02015
HCL7V004013
HCW0VA02016
HCL7V002011
HCL7V019011
HFW0VA03015
HDW0VX01010
JXLM5003011
JXW0ZB01019
HCL70021011
HFL5V003014
HDW0VA02017
HCL9V009011
DM333181G97
DD0L0TTH108
HCW0VA03012
ViewSonic Corporation
Description
END CAP(L) W0VA(HBW0VA01,REV3A) GP
END CAP(R) W0VA(HBW0VA02,REV3A) GP
CORE LABEL(HCL7V004,REV3A)GP
ID LABEL(S) W0VA(HCW0VA02,REV3A) GP
SERIAL LEBAL L7V(HCL7V002,REV3A) GP
CARTON LABEL L7VC(HCL7V019,REV3B) GP
CARTON(S) W0VA(HFW0VA03,REV3A) GP
ENERGY STAR NOTICE W0VX(HDW0VX01,R3A)GP
HANDLE LM5S(JXLM5003,REV 3B) GP
LCD FILM W0ZB-A1(JXW0ZB01,REV3A)GP
HI-POT LABEL L70L(HCL70021,REV3A)GP
SPACE PLATE L5VC(HFL5V003,REV3A)GP
20" SERVICE PAPER W0VA(HDW0VA02,R3A)GP
HG LABEL L9VD(HCL9V009,REV3A)GP
POWER CORD SP-30+IS-14 3P 1.8M(USA)B GP
CABLE DVI L0T BLACK 1800(24P) GP
DVI POP STICKER W0VA(HCW0VA03,REV3A) GP
55
Location
Confidential - Do Not Copy
Universal number#
Q'ty
1
1
1
1
1
1
1
1
1
1
1
0.042
1
1
1
1
2
VA2012w-1_VA2012wb-1
BOM LIST (VA2012wb-1)
ViewSonic Model Number: VS10859
Rev: 1b
Serial No. Prefix: PVW
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
ViewSonic P/N
N/A
B-00004144
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Ref. P/N
1LW0VAXVS05
21W0VAMB002
31W0VASS008
DFDS15FR041
DFDS15FR076
DFDI30FR022
DFDI30FR103
DFHD11MR001
DFHD30MR267
DFHD08FR102
DFHD04MR132
CC647T1MD05
CC71004MD09
Description
W0VA LCD MONITOR(USA) GP
W0VA M/B ASSY (NOVATEK 68563) GP
W0VA M/B S/S ASSY (NOVATEK 68563) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN DVI-I DIP30P 3R FR(P1.905 H10.04)GP
CONN DVI-I DIP30P 3R FR(P1.905,H10.04)GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
CONN DIP HEADER 30P 2R MR(P2.0,H4.0) GP
CONN DIP HEADER 8P 2R FR(P2.54,H5.0) GP
CONN DIP HEADER 4P 1R MR(P2.0,H4.1) GP
CAP EC 47U 10V(+-20%,105C,5*11,2000H)GP
CAP ELEC DIP 100U 25V(+-20%,105C,6*7) GP
14
N/A
CC73303MD69
CAP ELEC DIP 330U 16V(+-20%,105C,8*9) GP
15
16
17
18
19
20
21
22
23
24
N/A
N/A
N/A
N/A
N/A
N/A
B-00004142
N/A
N/A
N/A
CC810T1MD05
BG612000202
DFTJ05FR037
DC04725K011
AL007496D02
AL007496D29
23W0VABB009
DAW0VATB218
BEYG0014DA0
DFHD11MR001
CAP EC 1000U6.3V(+-20%,105C,8*11.5) GP
XTAL DIP 12MHZ(+-30PPM,HC-49/S TYPE) GP
CONN DIP PHONE JACK 5P FR(J303-1-A-G+)GP
CHOKE COIL 47UH(2.5A,+-10%,T07473 GP) GP
IC(20P) TDA7496L(DIP) GP
IC(20P) UTC TDA7496LK(DIP) GP
W0VA BUTTON/B ASSY GP
PCB(BUTTON)TB(2L,242*12,REVA)W0VA GP
LED(DIP) YELLOW/GREEN(L-3WYGW-F01) GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
25
PL-BT-0706-0127
DHP0002B108
SWITCH PUSH BUTTON(PT-002-B1,50MA,12V)GP
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
B-00004145
B-00005205
N/A
C-00004166
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6761
N/A
M-SCW-0824-0813
M-MS-0808-8986
M-SCW-0824-0814
N/A
N/A
CB-00002525
CB-00004152
CB-00004150
CB-00004151
E-00004155
M-SCW-0824-6802
M-SCW-0824-0726
N/A
N/A
N/A
C-00004164
N/A
M-MS-0808-9411
C-00005442
PL-00004168
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
N/A
C-00005750
M-00006097
N/A
N/A
N/A
E-00005214
E-00006103
N/A
N/A
N/A
N/A
N/A
C-00004165
CB-00002602
CB-00005211
P-00004159
AS08B532009
AS023360D18
24W0VALB042
34W0VALB000
36W0VAPS006
FAW0VA02014
FAW0VA03011
GBL9C001016
FCL70007019
FCM7T004014
MM30030IBJ4
MF30040BJB9
MF30060BBJ6
MBLI1004018
MM30060BBJ3
MS35080B456
FCL7TA03011
DD0L9VLC015
DD0L9VLC023
DDW0VABU007
DD0W0EIV008
DN0TE130F01
MM30040IBJ9
MF30080BBJ5
ME26060BJ21
FCW0VA02016
FCW0VA03012
25W0VALC007
EAW0VA02014
FBL70008014
FBW0VA01019
26W0VASA008
EAW0VA03011
EAW0VA05013
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
27W0VACS006
EBW0VA03011
GAW0VA02014
ME40200PJ28
MM40100BL61
2AW0VAPTA05
AAM201EW007
AAM201EW058
AZW0VA0BA07
FBW0VA05014
HGW0VA06015
2AW0VAPTQ01
28W0VAPK003
38W0VABS001
DDL7VDPC005
DDW9ZAPA009
HAL0T002019
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
W0VA LCD BEZEL ASSY(FOR AUO) GP
W0VA LCD BEZEL SUB ASSY GP
W0VA PCB SHIELDING ASSY GP
LCD BKT-L W0VA(FAW0VA02,REV3A)GP
LCD BKT-R W0VA(FAW0VA03,REV3A)GP
PANEL SPONGE L9C(GBL9C001,REV3A)GP
MYLAR SCALAR/LCD L70L-A(FCL70007,R3A)GP
AL FOIL M7T(FCM7T004,REV3A) GP
SCREW M3*3-I-NI GP
SCREW F3.0*4.0-B(BNI)GP
SCREW F3.0*6-B(NI)GP
IO NUT LI1(MBLI1004,REV3A)GP
SCREW M3.0*6,B(NI) GP
SCREW F3.5*8-B(NI)(WASHER)GP
AL-(50*25) L7TA(FCL7TA03,REV3B)GP
CABLE MB-LCD(30P,140MM)L9V-5 GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
SCREW M3.0*4.0-I(NI) GP
SCREW F3.0*8L,B,NI GP
SCREW M2.6*6.0-B(BNI) GP
POWER MYLAR-DOWN W0VA(FCW0VA02,REV3B) GP
INVETER MYLAR-DOWN W0VA(FCW0VA03,R3B) GP
W0VA LCD COVER ASSY GP
LCD COVER W0VA(EAW0VA02,REV3B)GP
LOCK METAL L70B(FBL70008,REV3A) GP
HINGE-PLATE W0VA(FBW0VA01,REV3A)GP
W0VA STAND ASSY GP
STAND-FRONT W0VA(EAW0VA03,REV3A)GP
STAND-BACK W0VA(EAW0VA05,REV3A)GP
HINGE ASSY W0VA(FAW0VA04,REV3A)GP
CONTACT-PLATE W0VA(FBW0VA02,REV3A)GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM)L7TA GP
SCREW F4.0*8-I(NI)GP
W0VA CHASSIS ASSY GP
HINGE COVER W0VA(EBW0VA03,REV3A)GP
RUBBER PLUG VESA (GAW0VA02,R3A)GRAY GP
SCREW T4.0*20.0-P(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
W0VA PANEL DEPENDENT KIT ASSY(AUO) GP
LCD(TFT)20" M201EW01 V.0 GP
LCD 20" M201EW01 V.0 FOR VSC CON GP
W0VA-A SW BIOS(NOVATEK,W/AUDIO)FOR AUO
PANEL HOOK W0VA(FBW0VA05,REV3A)GP
CD+QSG(AU_V03) W0VA-A(HGW0VA06,REV3A)GP
W0VA PANEL DEPENDENT KIT ASSY(QDI) GP
W0VA PACKING ASSY GP
W0VA BASE SUB ASSY GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
PE BAG L0T(HAL0T002,REV3A)GP
ViewSonic Corporation
56
Location
CN1
CN1
CN2
CN2
CN3
CN4
CN6
CN7
C36
C68,C69,C70,C71
C30,C46,C53,C66,C67
,C74,C76,C80,C82
C60
Y1
J1
L14
U6
U6
LED1
CN1
SW1,SW2,SW3,SW4,S
W5,SW6,SW7,SW8
Confidential - Do Not Copy
Universal number#
Q'ty
1
1
1
1
1
1
1
1
1
1
1
4
9
1
1
1
1
1
1
1
1
1
1
8
1
1
1
1
1
1
1
1
1
2
6
4
10
4
1
1
2
1
1
1
1
1
4
2
3
1
2
1
1
1
1
1
1
1
1
1
7
1
1
1
1
4
2
4
1
1
1
1
2
1
1
1
1
1
1
1
VA2012w-1_VA2012wb-1
Item
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
ViewSonic P/N
P-00004161
P-00004162
M-LB-0813-0747
N/A
M-LB-0813-0745
M-LB-0813-1042
P-00004167
N/A
PL-00005198
M-00004158
M-LB-0813-1043
N/A
N/A
DC-00003536
A-PC-0106-0224
CB-00003440
N/A
Ref. P/N
HBW0VA01019
HBW0VA02015
HCL7V004013
HCW0VA01010
HCL7V002011
HCL7V019011
HFW0VA01012
HDW0VX01010
JXLM5003011
JXW0ZB01019
HCL70021011
HFL5V003014
HDW0VA02017
HCL9V009011
DM333181G97
DD0L0TTH108
HCW0VA03012
ViewSonic Corporation
Description
END CAP(L) W0VA(HBW0VA01,REV3A) GP
END CAP(R) W0VA(HBW0VA02,REV3A) GP
CORE LABEL(HCL7V004,REV3A)GP
ID LABEL W0VA(HCW0VA01,REV3A) GP
SERIAL LEBAL L7V(HCL7V002,REV3A) GP
CARTON LABEL L7VC(HCL7V019,REV3B) GP
CARTON W0VA(HFW0VA01,REV3A) GP
ENERGY STAR NOTICE W0VX(HDW0VX01,R3A)GP
HANDLE LM5S(JXLM5003,REV 3B) GP
LCD FILM W0ZB-A1(JXW0ZB01,REV3A)GP
HI-POT LABEL L70L(HCL70021,REV3A)GP
SPACE PLATE L5VC(HFL5V003,REV3A)GP
20" SERVICE PAPER W0VA(HDW0VA02,R3A)GP
HG LABEL L9VD(HCL9V009,REV3A)GP
POWER CORD SP-30+IS-14 3P 1.8M(USA)B GP
CABLE DVI L0T BLACK 1800(24P) GP
DVI POP STICKER W0VA(HCW0VA03,REV3A) GP
57
Location
Confidential - Do Not Copy
Universal number#
Q'ty
1
1
1
1
1
1
1
1
1
1
1
0.042
1
1
1
1
2
VA2012w-1_VA2012wb-1
8. Exploded Diagram and Exploded Parts List
ViewSonic Corporation
Model
Title
Date
ViewSonic Corporation
58
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
EXPLODED PARTS LIST (VA2012w-1)
ViewSonic Model Number: VS10859
Rev: 1b
Serial No. Prefix: PXC
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
ViewSonic P/N
B-00004144
B-00004145
B-00005205
B-00004142
N/A
N/A
N/A
M-MS-0808-9244
M-MS-0808-9243
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6761
HW-00004156
M-SCW-0824-0813
M-MS-0808-8986
M-SCW-0824-0814
N/A
N/A
CB-00004152
CB-00004150
CB-00004151
E-00004155
N/A
M-MS-0808-9411
C-00005442
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
C-00006104
N/A
N/A
N/A
E-00006103
N/A
N/A
N/A
N/A
M-00004158
PL-00001806
N/A
M-LB-0813-0745
ViewSonic Corporation
Ref. P/N
21W0VAMB002
AS08B532009
AS023360D18
23W0VABB009
EAW0VA01026
EBW0VA01019
EBW0VA02015
FEL7V004015
FEL7V003019
FCW0VA01010
FAW0VA01018
FAW0VA02014
FAW0VA03011
FCW0E002016
FCL70007019
FCM7T004014
MM30030IBJ4
MF30040IJB3
MF30060BBJ6
MBLI1004018
MM30060BBJ3
MS35080B456
FCL7TA03011
DD0L9VLC023
DDW0VABU007
DD0W0EIV008
DN0TE130F01
EAW0VA02022
FBL70008014
FBW0VA01019
EAW0VA03029
EAW0VA05021
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
EBW0VA03020
GAW0VA02014
ME40200PJ28
MM40100BL61
AAM201EW058
EAW0VA04025
FBW0VA03011
GAW0VA03011
GAW0VA01018
JXW0ZB01019
GAL5T001016
HCW0VA02016
HCL7V002011
Description
W0VA M/B ASSY (NOVATEK 68563) GP
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
W0VA BUTTON/B ASSY GP
LCD BEZEL W0VA SILVER GP
FUNCTION BUTTON W0VA GP
LENS W0VA(EBW0VA02,REV3A)GP
BIRD LOGO-10MM L7VC
LOGO FRONT-VSC-38MM L7VC
SHIELDING MYLAR W0VA GP
SHIELDING W0VA GP
LCD BKT-L W0VA GP
LCD BKT-R W0VA GP
POWER MYLAR W0E-A1 GP
MYLAR SCALAR/LCD L70L-A GP
AL FOIL M7T GP
SCREW M3*3-I-NI GP
SCREW F3.0*4.0-I(MC) GP
SCREW F3.0*6-B(NI)GP
IO NUT LI1
SCREW M3.0*6,B(NI) GP
SCREW F3.5*8-B(NI)(WASHER)GP
AL-(50*25) L7TA GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
LCD COVER W0VA BKGP
LOCK METAL L70B GP
HINGE-PLATE W0VA1 GP
STAND FRONT W0VA BK GP
STAND-BACK W0VA BK GP
HINGE ASSY W0VA GP
CONTACT-PLATE W0VA GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM) GP
SCREW F4.0*8-I(NI)GP
HINGE COVER W0VA BK GP
RUBBER PLUG VESA GRAY GP
SCREW T4.0*20.0-P(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
LCD 20"w M201EW01 v0 panel
BASE W0VA BK GP
BASE-PLATE W0VA GP
RUBBER FOOT-C W0VA GP
RUBBER FOOT W0VA GP
LCD FILM W0ZB-A1 GP
RUBBER-HOLDER L5TL-E
ID LABEL(S) W0VA GP
SERIAL LEBAL L7V GP
59
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
10
10
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
7
1
1
1
4
2
4
1
1
1
2
2
1
1
1
1
VA2012w-1_VA2012wb-1
EXPLODED PARTS LIST (VA2012wb-1)
ViewSonic Model Number: VS10859
Rev: 1b
Serial No. Prefix: PVW
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
ViewSonic P/N
B-00004144
B-00004145
B-00005205
B-00004142
N/A
N/A
N/A
M-MS-0808-9244
M-MS-0808-9243
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6761
HW-00004156
M-SCW-0824-0813
M-MS-0808-8986
M-SCW-0824-0814
N/A
N/A
CB-00004152
CB-00004150
CB-00004151
E-00004155
N/A
M-MS-0808-9411
C-00005442
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
C-00005750
M-00006097
N/A
N/A
E-00006103
N/A
N/A
N/A
N/A
M-00004158
PL-00001806
M-LB-0813-0745
N/A
ViewSonic Corporation
Ref. P/N
21W0VAMB002
AS08B532009
AS023360D18
23W0VABB009
EAW0VA01018
EBW0VA01019
EBW0VA02015
FEL7V004015
FEL7V003019
FCW0VA01010
FAW0VA01018
FAW0VA02014
FAW0VA03011
FCW0E002016
FCL70007019
FCM7T004014
MM30030IBJ4
MF30040IJB3
MF30060BBJ6
MBLI1004018
MM30060BBJ3
MS35080B456
FCL7TA03011
DD0L9VLC023
DDW0VABU007
DD0W0EIV008
DN0TE130F01
EAW0VA02014
FBL70008014
FBW0VA01019
EAW0VA03011
EAW0VA05013
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
EBW0VA03011
GAW0VA02014
ME40200PJ28
MM40100BL61
AAM201EW058
EAW0VA04017
FBW0VA03011
GAW0VA03011
GAW0VA01018
JXW0ZB01019
GAL5T001016
HCL7V002011
HCW0VA01010
Description
W0VA M/B ASSY (NOVATEK 68563) GP
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
W0VA BUTTON/B ASSY GP
LCD BEZEL
FUNCTION BUTTON W0VA GP
LENS W0VA GP
BIRD LOGO-10MM L7VC
LOGO FRONT-VSC-38MM L7VC
SHIELDING MYLAR W0VA GP
SHIELDING W0VA GP
LCD BKT-L W0VA GP
LCD BKT-R W0VA GP
POWER MYLAR W0E-A1 GP
MYLAR SCALAR/LCD L70L-A GP
AL FOIL M7T GP
SCREW M3*3-I-NI GP
SCREW F3.0*4.0-I(MC) GP
SCREW F3.0*6-B(NI)GP
IO NUT LI1(MBLI1004,REV3A)
SCREW M3.0*6,B(NI) GP
SCREW F3.5*8-B(NI)(WASHER)GP
AL-(50*25) L7TA GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
LCD COVER W0VA GP
LOCK METAL L70B GP
HINGE-PLATE W0VA(FBW0VA01,REV3A)GP
STAND-FRONT W0VA GP
STAND-BACK W0VA GP
HINGE ASSY W0VA GP
CONTACT-PLATE W0VA GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM) GP
SCREW F4.0*8-I(NI)GP
HINGE COVER W0VA(EBW0VA03,REV3A)GP
RUBBER PLUG VESA (GAW0VA02,R3A)GRAY GP
SCREW T4.0*20.0-P(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
LCD 20"w M201EW01 v0 panel
BASE W0VA GP
BASE-PLATE W0VA
RUBBER FOOT-C W0VA GP
RUBBER FOOT W0VA GP
LCD FILM W0ZB-A1 GP
RUBBER-HOLDER L5TL-E(GAL5T001,REV3B)
SERIAL LEBAL L7V GP
ID LABEL W0VA GP
60
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
10
10
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
7
1
1
1
4
2
4
1
1
1
2
2
1
1
1
1
VA2012w-1_VA2012wb-1
Packing for Shipping
PACKING PART LIST (VA2012w-1 )
ViewSonic Model Number: VS10859
Rev: 1b
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic P/N
N/A
P-00004161
P-00004162
N/A
A-00003642
P-00004160
N/A
P-00004159
CB-00002602
CB-00004149
C-00004147
Ref. P/N
1LW0VAXVS99
HBW0VA01019
HBW0VA02015
HGW0VA06015
DM33T181004
HFW0VA03015
HCL7VC019011
HAL0T002019
DDL7VDPC005
DD0L0TPC007
38W0VABS010
Location
VA2012w monitor
END CAP (L)
END CAP (R)
USER'S MANUAL & CD
POWER CORD 3P 1.8M
CARTON
CARTON LABEL
PE BAG
VGA CABLE
AUDIO CABLE
Base assy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
PACKING PART LIST (VA2012wb-1 )
ViewSonic Model Number: VS10859
Rev: 1b
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic Corporation
61
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
ViewSonic P/N
N/A
P-00004161
P-00004162
N/A
A-PC-0106-0224
P-00004167
N/A
P-00004159
CB-00002602
CB-00004149
C-00004165
Ref. P/N
1LW0VAXVS05
HBW0VA01019
HBW0VA02015
HGW0VA06015
DM333181G97
HFW0VA01012
HCL7VC019011
HAL0T002019
DDL7VDPC005
DD0L0TPC007
38W0VABS001
Location
VA2012wb monitor
END CAP (L)
END CAP (R)
USER'S MANUAL & CD
POWER CORD 3P 1.8M
CARTON
CARTON LABEL
PE BAG
VGA CABLE
AUDIO CABLE
Base assy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
ViewSonic Corporation
+20V
VGA-SDA
62
Confidential - Do Not Copy
AC 90-264V
Key Pad
EEPROM
24LC16
INVERTER
ON/OFF
POWER
CSL
SDA
DVI-SCL
DVI-SDA
VGA-SCL
CSL
DVI-SCL
BOARD
ADJ
X'TAL
SCALAR
NT68563HF
INVERTER HV
+12V
Mcu
NT 68F633L
(12MHz)
BL-BRIGHT
BL-ON
MCU-VDD(+3.3V)
SDA
DVI-SDA
MCU-VDD(+3.3V)
DVI
I/P
VGA-SCL
RSTN
VGA-SDA
+1.8V
STEP DOWN CONVERTER
REFCLKI
VGA
I/P
+3.3V
+5V
LCD-ON
PHONE JACK
VOLUME
STANDBY
MUTE
SI9435
+5V
MCU-VDD(+3.3V)
CVDD1V8(+1.8V)
+3.3V
TDA7496L
+12V
LCD_VDD
LCD PANEL
9. Block Diagram
VA2012w-1_VA2012wb-1
10. Schematic Diagrams
1
2
ADC_VAA
GND_A
D1
BAV99/NC
L1
BEAD 30/6
3
B1
R122
100/6/NC
R1
75/6
RX
0/6
BI1- 3
GND_A
VGA-5V
CN1
D-SUB-Female
VS
14
14
HS
13
1
D3
ZD5V6/NC
4
R120
Tx
100/6
13
12
12
11
11
G
10
5
9
4
8
3
7
2
6
1
G
1
GND_A
R3
1K/6
R119
100/6
VGA-DET 4
Rx
4
D2
BAV99/NC
G1
B1
L3
BEAD 30/6
3
15
2
15
ADC_VAA
17
10
5
9
4
8
3
7
2
6
1
16
2
R2
4.7K/6
GND_A
CH201209T-300
L2
MCU-VDD
4 VGA-SCL
BI1 3
R4
75/6
G1
R1
MCU-VDD
GI1 3
CH201209T-300
L4
0/6
L5
BEAD 30/6
GI1- 3
GND_A
GND_A
R121
100/6/NC
ADC_VAA
D-SUB1
1
2
R5
4.7K/6
4 VGA-SDA
2
GND_A
D5
BAV99/NC
R1
3
D4
ZD5V6/NC
1
R6
75/6
RI1 3
CH201209T-300
L6
0/6
RI1- 3
GND_A
GND_A
3
R7
VS
2
VS
100/6/NC
D6
ZD5V6
C1
1000pF/6/NC
IC1
HS
1
R106
2.2K/6/NC
GND_A
GND_A
GND_A
R8
100/6/NC
1
2
3
4
5
6
7
D0
Q0
D1
Q1
D2
Q2
GND
VCC
D5
Q5
D4
Q4
D3
Q3
14
13
12
11
10
9
8
ADC_VAA
C2
0.1uF/6
74LVC14
HS
R107
0/6
D7
ZD5V6
R108
2.2K/6/NC
GND_A
GND_A
2
BAV99
VSIN 3
C3
22pF/6/NC
HSIN 3
1
DB15
-------------------------1
R
2
G
3
B
4
NC
5
RETURN
6
RGND
7
GGND
8
BGND
9
+5V
10
SYNC.RETURN
11
NC
12
SDA
13
Hs
14
Vs
15
SCL
GND_A
GND_A
GND_A
ViewSonic Corporation
Model
ADC Input
Title
Date
ViewSonic Corporation
63
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
1
2
1
2
1
1
GND_A
GND_A
MCU-VDD
MCU-VDD
3
3
D11
BAV99/NC
R9
R11
10/6
10/6
RX2- 3
RX2+ 3
R10
4.7K/6
R12
4.7K/6
DVI-SCL
DVI-SDA
10/6
10/6
RX1- 3
RX1+ 3
2
R13
R14
2
DVI-SCL 4
DVI-SDA 4
D12
ZD5V6/NC
D13
ZD5V6/NC
R15
R16
1K/6
DVI-DET 4
1K/6
GND_A
D14
BAV99/NC
1
1
DVI-5V
D15
BAV99/NC
D16
BAV99/NC
3
GND_A
ADC_VAA
D10
BAV99/NC
D9
BAV99/NC
D8
BAV99/NC
3
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
GND_A
3
TX1TX1+
TX1/3 Shld
TX3TX3+
+5V
GND
HP Detect
TX0TX0+
TX0/5 Shld
TX5TX5+
TXC Shld
TXC+
TXCSHELL2
ADC_VAA
GND_A
3
C1
C2
C3
C4
C5
C6
8
1
2
3
4
5
6
7
3
32
SHELL1 AR
AG
AB
AHS
AGND
NC
A VS
TX2TX2+
TX2/4 Shld
TX4TX4+
DDC CLK
DDC DATA
3
31
2
CN2
DVI-I-Female
ADC_VAA
2
ADC_VAA
R17
R18
10/6
10/6
R19
R20
10/6
10/6
RX0- 3
RX0+ 3
GND_A
GND_A
RXC+ 3
RXC- 3
D17
BAV99/NC
GND_A ADC_VAA GND_A ADC_VAA GND_A ADC_VAA
2
1
2
1
2
1
2
1
DVI Input
GND_A ADC_VAA
BAV99
ViewSonic Corporation
Model
DVI Input
Title
Date
ViewSonic Corporation
64
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
VGA_3V3
0.047uF/6
22
SOGI1
R26
R27
75/6
100/6
C18
C19
0.047uF/6
0.047uF/6
23
24
GIN1+
GIN1-
R28
R29
75/6
100/6
C20
C21
0.047uF/6
0.047uF/6
25
26
RIN1+
RIN1-
0.1uF/6
0.1uF/6
19
27
BVMID
RVMID
41
42
HSYNCI0/GPO5
VSYNCI0/GPO4
30
31
BIN0+/Y0
BIN0-/Y1
RIN0+/Y5
RIN0-/Y6
37
ADC_GND/Y7
2
54
98
72
116
DVDD
DVDD
DVDD
DVDD
PVCC
4
13
28
18
46
15
PVCC
89
88
85
84
83
82
81
T3M 5
T3P 5
T5M
T5P
T6M
T6P
TCLK2M
TCLK2P
T7M
T7P
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
80
79
78
77
76
75
74
73
71
70
69
68
67
66
65
64
62
61
60
59
58
57
56
55
T5M 5
T5P 5
T6M 5
T6P 5
TCLK2M 5
TCLK2P 5
T7M 5
T7P 5
YUV_CLK
PGND
GPO1
REFCKO/GPO6
GPO7
GPO8
GPO9/PWM1
GPO10/PWM0
GND_A
GND_A
VGA_3V3
PVCC
GND_A
GND_A
117
124
50
49
48
47
16
52
63
123
87
107
GND_A
AGND
AGND
AGND
AD0/GPO2
AD1/GPO3
1
7
10
118
119
ADC_GNDA
ADC_GNDA
IN_VSO/GPO4
IN_HSO/GPO5
29
17
120
121
DPLL
T4M 5
T4P 5
0.1uF/6
C34
OSCI
OSCO
CVDD1V8
0.1uF/6
C33
SCL
SDA
RSTn
IRQn
GND_A
120pF/6
C32
AD0
AD1
45
44
T3M
T3P
SPB/DISP_VS
GPO0/DISP_HS
SPA/DISP_DE
T4M
T4P
GND_A
1uF/8
C31
BYPASS-VS
BYPASS-HS
4 BYPASS-VS
4 BYPASS-HS
35
36
125
126
127
128
REFCLKI
4 REFCLKI
GIN0+/Y3
GIN0-/Y4
51
SCL
SDA
RSTn
IRQn
4 SCL
4 SDA
4 RSTn
4 IRQn
SOGI0/Y2
DPLL_GND
GND_A
TP1
YUV-CLK/NC 1
32
33
34
NT68563HF
43
C22
C23
IC2
330uF/16V
C30
C17
10uF/6.3V/Y5V/1206
C29
390/6 1%
0.1uF/6
C14
R25
T0M 5
T0P 5
T1M 5
T1P 5
T2M 5
T2P 5
TCLK1M 5
TCLK1P 5
0.1uF/6
C13
BIN1+
BIN1-
ADC_VAA
0.1uF/6
C27
20
21
DVDD
0.1uF/6
C26
0.047uF/6
0.047uF/6
OPTION
GND_A
0.1uF/6
C10
C12
C16
GND_A
0.1uF/6
C25
75/6
100/6
GND_A
R23
R24
AVCC
AVCC
HSYNCI1
VSYNCI1/TOUTP
ADC_VAA
ADC_VAA
39
40
DPLL_VDD
VREF
1
D18
TL431CUS
0.1uF/6
C9
1 RI1
1 RI1-
38
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
T0M
T0P
T1M
T1P
T2M
T2P
TCLK1M
TCLK1P
115
114
113
112
111
110
109
108
106
105
104
103
102
101
100
99
97
96
95
94
93
92
91
90
0.1uF/6
C8
1 GI1
1 GI1-
RX2+
RX2RX1+
RX1RX0+
RX0RXC+
RXC-
VREF
1K/6
0.1uF/6
C7
1 BI1
1 BI1-
2
3
5
6
8
9
11
12
CGND
D/CGND
D/CGND
DGND
DGND
1 HSIN
1 VSIN
CVDD
CVDD
CVDD
53
86
122
VREF
REXT
R21
C6
10uF/6.3V/Y5V/1206
RX2+
RX2RX1+
RX1RX0+
RX0RXC+
RXC-
2 RX2+
2 RX22 RX1+
2 RX12 RX0+
2 RX02 RXC+
2 RXC-
14
ADC_VAA
C5
0.1uF/6
390/6 1%
DVDD
C4
0.1uF/6
R22
DPLL
B0805/1K
VGA_3V3
L8
B0603/30
ADC_VAA
L7
3
CVDD1V8
ViewSonic Corporation
GND_A
Model
NT68563
Title
Date
ViewSonic Corporation
65
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
MCU-VDD
MCU-VDD
4.7K/6
MUTE 7
PANEL_SEL2
R118
10K/6/NC
MUTE
PANEL_SEL1
R116
10K/6/NC
+5V
R114
10K/6/NC
+5V
6 BL-ON
R117
10K/6
R32
4.7K/6
R115
10K/6
R113
10K/6
R31
MCU-VDD
PANEL_SEL3
MCU-VDD
IC3
+
C37
GND_A
0.1uF/6
GND_A
R37
1M/6
R45
SCL
SDA
5V-DETECT
RIGHT
LEFT
BL-PWM
VOL-PWM
PANEL_SEL2
PANEL_SEL1
STANDBY
GND_A
0/6
C41
22pF/6
GND_A
GND_A
MUTE_KEY
MCU-VDD
RSTn 3
BYPASS-HS 3
IC4
+5V
1
2
3
4
PWR
LCD-ON 5
MENU
WP
DOWN
A0
A1
A2
GND
8
7
6
5
VCC
WP
SCL
SDA
R110
5V-DETECT
DVI-DET 2
VGA-DET 1
SEL
UP
R40
100/6
R41
100/6
R42
100/6
R43
100/6
LEDG1
LEDA1
22/6
WP
SCL 3
SDA 3
AT24C16
GND_A
R39
15K/6
GND_A
Rx
Tx
3 IRQn
C40
22pF/6
C39
22pF/6
3 REFCLKI
1
1
12MHZ
33
32
40
39
38
19
18
37
36
1
35
34
31
30
29
2
25
26
27
28
3
4
R111
10K/6/NC
Y1
NC2
NC1
PC3
PC4
PC5
PE1
PE0
PC6
PC7
PD0
PD1
PD2
PD3
PD4
PD5
PA0/PWM2
PB4*/SCL0*
PB5*/SDA0*
PB6*/SCL1*
PB7*/SDA1*
PA1/PWM3
PA2/PWM4
R36
10K/6
3 BYPASS-VS
GND_A
GND_A
PC2/SOGI
PC1*
PC0*
RSTB
VDD
PD6
GND
68F633L
OSCO
OSCI
P30/RXD
P31/TXD
P34/T0
P35/T1
PB3/ADC3/INTE1
PB2/ADC2/INTE0
PB1/ADC1
PB0/ADC0
PA7*/PWM9*
PA6*/PWM8*
PA5*/PWM7*
PA4*/PWM6*
PA3/PWM5
C38
0.1uF/6
47uF/16V
41
42
43
10
44
12
22
20
21
11
13
16
17
15
14
24
23
9
8
7
6
5
R109
10K/6
MCU-VDD
C36
MCU-VDD
PANEL_SEL3
100K/6
C35
0.1uF/6
R34
GND_A
DVI-SCL 2
DVI-SDA 2
VGA-SCL 1
VGA-SDA 1
GND_A
GND_A
68F633-PLCC44
MCU-VDD
JP2
JP1
+5V
R48
2K/6
R47
2K/6
MCU-VDD
R49
1K/6
BL-PWM
R50
4.7K/6
4.7K/6
GND_A
GND_A
For Debug Use
BL-BRIGHT 6
MCU-VDD
CN3
C43
0.1uF/6/NC
LEFT-
R66
330/6
LEDA1
4.7K/6
1
MUTE_KEY
MENU
SEL
PWR
DOWN
UP
RIGHT
LEFT
LEDA
LEDG
Q1
R56
4.7K/6
2
MMST3906
3
VOLUME 7
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
330/6
1
4.7K/6
R112
R55
R57
R59
R60
R61
R62
R64
R65
R53
R54
1K/6
R58
MUTEMENUSELPWRDOWNUPRIGHT-
11
10
9
8
7
6
5
4
3
2
1
4.7K/6
GND_A
R52
+5V
VOL-PWM
SCL
SDA
CON4/NC
CON4/NC
SCL
SDA
STANDBY 7
1
2
3
4
+5V
TX
RX
C42
0.1uF/6
R51
1
2
3
4
LEDA
Q2
R63
LEDG1
4.7K/6
2
MMST3906
3
CON11P-2.0S
LEDG
GND_A
GND_A
MCU-VDD
MCU-VDD
GND_A
MCU-VDD
MCU-VDD
GND_A
MCU-VDD
GND_A
MCU-VDD
2
D33
CHN217
1
2
D32
CHN217
1
2
D31
CHN217
3
3
MENU-
3
GND_A
1
1
2
D29
CHN217
1
2
D28
CHN217
GND_A
SEL-
3
PWR-
3
3
GND_A
1
D27
CHN217
2
3
MCU-VDD
1
D34
CHN217
2
1
GND_A
DOWN-
UP-
2
D30
CHN217
RIGHT-
LEFT3
MUTE-
GND_A
MCU-VDD
ViewSonic Corporation
Model
MCU(I/O_Key)
Title
Date
ViewSonic Corporation
66
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
CN4
3 T0M
3 T1M
3 T2M
TCLK1M
T3M
T4M
3 T5M
3 T6M
3 TCLK2M
3 T7M
R68
T6M
TCLK2M
T7M
10K/6/NC
LCD-VDD
R70
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
T0P
T1P
T2P
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
T0P 3
T1P 3
T2P 3
TCLK1P
T3P
T4P
T5P
T5P 3
TXB2+
T6P
T6P 3
TXBC+ TCLK2P
TCLK2P 3 R67
TXB3+ T7P
T7P 3
LCD-VDD
1841 30P
0/6/NC
TCLK1P 3
T3P 3
T4P 3
GND_A
GND_A
+3.3V
10K/6/NC
0/6/NC
3 TCLK1M
3 T3M
3 T4M
+3.3V
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
R69
T0M
T1M
T2M
GND_A
GND_A
Max 2.0A
+5V
L9
+18V BEAD 120/1206
L10
BEAD 120/1206/NC
L11
BEAD 120/1206/NC
BEAD 120/1206
2.2K/6
3
GND_A
R73
4.7K/6
Q4
MMBT3904
2
GND_A
GND_A
2005.06.13 modify
1
4 LCD-ON
+
C46
330uF/16V
8
7
6
5
0.1uF/6
R72
1
2
3
4
L12
C48
C44
2200pF/6
4.7K/6
LCD-VDD
SI9435
C45
2200pF/6
Q3
R71
C47
0.1uF/6
+12V
ViewSonic Corporation
GND_A
Model
PANEL OUTPUT
Title
Date
ViewSonic Corporation
67
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
L13
BEAD 120/1206/NC
D19
1SS355
GND_A
GND_A
0/1206
C50
330uF/16V/NC
2 0/1210/NC
C49
0.1uF/6/NC
R75
47/6
CF
3
R76
330K/6
GND
4
AIC1563
1SS355
3K/6 1%
GND_A
C57
+5V
MMST3906
GND_A
R79
Q6
2
R78
1K/6 1%
GND_A GND_A
C51
0.1uF/6
4
3
2
1
D20
1
FB
DE
2200pF/6
3
VCC
5
1
2
R77
240K/6 1%
IS
6
DC
C56
1uF/8
Max 2.5A 100mil * 4via
L14 2
R80
1 47UH
L15
BEAD 120/1206
1
1K/6 1%
C58
1000pF/6
D21
CN6
RB081L-20
CONN 4x2-R
2
GND_A
GND_AGND_AGND_A
2
4
6
8
BL-BRIGHT
GND_A
GND_A
BL-ON
BL-ON 4
BL-BRIGHT 4
C83
10K/6
1
3
5
7
GND_A
C60
1000uF/6.3V
Max 1.2A 60mil * 3 via
GND_A
C59
0.1uF/6
C53
330uF/16V
BOOST
C55
120pF/6
R74
7
2 0/1210
C52
0.1uF/6
FUSE1 1
8
Q5
NDS9410A/SO
5
6
7
8
U1
+12V
C54
0.1uF/8
FUSE2 1
GND_A
L16
+18V
D22
560/6/NC
+
C61
330uF/16V/NC
C62
100uF/25V/NC
C63
2200pF/6/NC C64
0.1uF/6/NC
R83
RB081L-20/NC
100UH/NC
R81
R82
+
1
2
2
1
13.3K/1%/NC
390K/6/NC
U2
8
DRI
SC
1
7
IPK
SE
2
6
VCC
TC
3
GND
4
5
GND_A
FB
R84
U3
+5V
VOUT
2
ADJ/GND 4
4
VGA_3V3
LT1117/TO223
U3-A1
GND_A
C65
L17
BEAD 120/0805
3
330pF/6/NC
1
C66
330uF/16V
GND_A
VIN
VOUT
L18
BEAD 120/0805
2
ADJ/GND
AIC1084/TO252/NC
+
GND_AGND_A
VIN
1
GND_A
1K/1%/NC
AIC1563/NC
3
R86
330/6 1%
DVDD
R85
200/6 1%
+
C67
330uF/16V
+12V
L19
BEAD 120/0805
ADC_VAA
U5-A1
+5V VGA-5V DVI-5V
VOUT
3
VIN
VOUT
2
ADJ/GND 4
4
1
ADJ/GND 4
4
VIN
1
LT1117/TO223
LT1117/TO223/NC
SSM12LL
+5V
U4-A1
VIN
1
ADJ/GND
VOUT
2
3
R87
L28
BEAD 120/0805
12
1
3
1
RB081L-20 RB081L-20
AIC1084/TO252/NC
VIN
VOUT
L21
BEAD 120/0805
2
ADJ/GND
R88
330/6 1%
200/6 1%
+
C68
100uF/25V
D26
R89
2
+ C69
100uF/25V
1
C70
100uF/25V
L20
BEAD 120/0805
D25
2
CVDD1V8
+1V8
U5
MCU-VDD
3
+
AIC1084/TO252
R90
+
100uF/25V
D23
BAT54C-GS08
GND_A
2
C71
D24
U4
3
ViewSonic Corporation
Model
Scaler Power
150/6 1%
330/6 1%
Title
GND_A
Date
GND_A
ViewSonic Corporation
68
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
+5V
R95
Q7
MMBT3904
2K/62
VOLU
VCC12
1
4 VOLUME
6K8/6
10K/6
R93
10K/6
R94
R92
C72
1uF/8
1K/6
3
R91
+12V
L22
BEAD/1206
VS
1
5
4
3
2
ZD005D100
L23 BEAD 120/0805
2 Z0415
1
L_LINE
R96
100/6
C75
LIN_PC
0.47uF/6
4
R97
RIN_PC
100/6
R98
20K/6
C77
0.47uF/6
9
INR
0.1uF/6
330uF/16V
16
INL
VAROUT_L
R99
20K/6
2 Z0416
1
L24 BEAD 120/0805
C79
220pF/6
R_LINE
C74
AGND
OUTL
C78
220pF/6
J1
U6
C73
VS
PC
AUDIO-IN
15
AGND
17
C76
SPKOUTL
330uF/16V
5
VOLUME
6
7
CN7
R100
BEAD 120/0805
R101
BEAD 120/0805
VOLU
1
2
3
4
4606-04-04P-R
+5V
AGND
11
STBY
VAROUR_R
12
MUTE
OUTR
10
SVR
AGND
10K/6
R103
10K/6
14
C80
SPKOUTR
330uF/16V
L25
BEAD 120/1206
MUTE
Q8
2
1
C82
330uF/16V
C81
0.1uF/8
DTC144EUA
TDA7496L
1
2
3
13
18
19
20
4 MUTE
GND
GND
GND
GND
GND
GND
GND
3
R102
AGND
L26 BEAD/1206
+5V
AGND
R104
10K/6
R105
AGND
AGND
GND_A
10K/6
BEAD/1206
3
L27
4 STANDBY
STANDBY
Q9
2
AGND
GND_A
1
DTC144EUA
AGND
ViewSonic Corporation
Model
AUDIO
Title
Date
ViewSonic Corporation
69
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
Rev:
11. PCB Layout Diagrams
MB TOP70
ViewSonic Corporation
70
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
MB TOP
ViewSonic Corporation
71
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
MB BOTTOM7
ViewSonic Corporation
72
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1
* Reader’s Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit
Excellent
Good
Fair
Bad
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjustment Procedure
6. Troubleshooting Flow Chart
7. Recommended Spare Parts List
8. Exploded Diagram and Exploded Parts List
9. Block Diagrams
10. Schematic Diagrams
11.PCB Layout Diagrams
B. Are you satisfied with this Service Manual?
Item
Excellent
Good
Fair
Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing
C. Do you have any other opinions or suggestions regarding this service manual?
Reader’s basic dada:
Name:
Title:
Company:
Add:
Tel:
Fax:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes
([email protected])
ViewSonic Corporation
73
Confidential - Do Not Copy
VA2012w-1_VA2012wb-1