Download White Rodgers 1F95-71 Programming instructions

• TOTAL KEYPAD LOCKOUT — When option switch #3 is in the total keypad lockout
position (ON), programs cannot be altered
and all buttons are disabled.
NOTE
Programming should be completed, desired
system operation should be selected (HEAT,
COOL, or AUTO), and battery should be installed before changing option switch #3.
Total Keypad Lockout (ON)
2
3
4
Switch #1 set at installation (DO NOT CHANGE)
Switch #2 set at installation (DO NOT CHANGE)
Switch #3 ON
Switch #4 OFF
16
• PARTIAL KEYPAD LOCKOUT — When
option switch #4 is in the partial keypad
lockout position (ON), programs cannot be
altered. All buttons except
and
are disabled.
NOTE
ON
1
Switches #1 and #2 are set at installation
and should not be changed. To enable total
keypad lockout, move option switch #3 to
ON (ensure that option switch #4 is OFF).
To disable total keypad lockout, move option switch #3 to OFF.
Programming should be completed, desired
system operation should be selected (HEAT,
COOL, or AUTO), and battery should be installed before changing option switch #3.