Download Sharp DT 510 - DLP Projector - HD Specifications

Cleaning and Replacing the Dust Filters
Cleaning the Dust Filters
Info
• The dust filters should be cleaned every 100
hours of use. Clean the filters more often when
the projector is used in a dusty or smoky
location.
1
Press SSTANDBY/ON on the projector to put the projector into
standby mode.
STANDBY/ON button
• Wait until the cooling fan stops.
• Disconnect the power cord and unplug
the power cord from the AC socket.
AC socket
2
Remove the filter holders.
3
Clean the dust off the dust filters
and the holders with a hand
broom.
• Turn the projector over. To remove the filter holders, press in the tabs while lifting
up.
52
DT-510_EN_l
52
06.10.18, 7:12 AM