Download Sharp LC-20M4U Specifications
Transcript
PREMIER MOUNTS WALL & CEILING MOUNT SYSTEMS Full Tilt or Flat Wall Mount Brackets 42” plasma monitors can be wall mounted with the full tilt featured PDM-xxxT (tilting) or ultra slim PDM-xxxF (flat) wall mounts. The tilting mounts feature a tilt adjustment of 0° -5° 10° -15° with positive locking of the set angle. Both mounts attach to the wall on 16” stud center holes configured in the mount. Dual electrical handy box type “knock outs” are available in the base of the mount to facilitate power and signal cables outlets within the mount to minimize visible cables. Optional PSD-S or PSD-D adapters when mated with the PDMxxxT or PDM-xxxF provide a (single) 1-1/2” or (dual) 2” NTP (national tapered pipe) swivel coupling with thread lock ceiling mounting points. PDM-442T with PSD-S (single display) ceiling mount adapter PDM-442T with PSD-D (dual display) ceiling mount adapter VIDEO MONITORS PDM-442F (flat) wall mount kit installed on Panasonic PT42P1 42” plasma display Wall Mount Brackets and Ceiling Mounting Accessories PDM-501F Flat for Pioneer 50-inch ................................249.95 PDM-501T Tilting for Pioneer 50-inch ..........................329.95 PSD-S 11/2” NTP (single) Ceiling Adapter ..........................59.95 PSD-D 2” NTP (dual) Ceiling Adapter ..............................79.95 AST-2446 11/2” Adjustable Height Suspension Adapter for drop or high ceiling type installation ..........................179.95 AST-2446 /2 Same as above except 2” ............................269.95 The AST-2446 or AST-2446/2 adapters feature a height adjustment range of 24”–46” (12”–24” with cut) in 11/4” increments and can mate directly with the PSD-S or PSD-D ceiling mount adapters UPD-T Series/UPD-F Series Tilt or Flat Plasma Mobile Cart Systems The UPD-xxxxT (tilt) or UPD-xxxxF (flat) series of mobile stands permit the safe roll around movement of large screen plasma displays. The monitors can mount directly in either the horizontal or vertical mode to the cart for safety. The color scheme for the new mobile display is black and chrome to further enhance the attractive slim lines of the new plasma displays. ■ Centerline of screen height from floor adjustability ranges from a low of 24” to a high of 60”. ■ The UPD-xxxxT allows flat, 5°, 10° and 15° tilting of the display on the cart. The UPD-xxxxF comes in a flat only mode. ■ Optional height adjustable 18” x 22” flat equipment shelves are available. UPD-xxxxT Tilt Mobile Stand ......699.95 UPD-xxxxF Flat Mobile Stand ......649.95 xxxx Specify for brand plasma THE PROFESSIONAL’S SOURCE (212) 444-6601 • FAX: (212) 444-5001 PHOTO - VIDEO - PRO AUDIO 1 • 8 0 0 • 9 4 7 • 9 9 0 1 565 PDM-405F Flat for Mitsubishi 40-inch ..........................249.95 PDM-405T Tilting for Mitsubishi 40-inch .................... 329.95 PDM-425F Flat for NEC 42-inch ..................................249.95 PDM-425T Tilting for NEC 42-inch ..............................329.95 PDM-442F Flat for Panasonic ......................................249.95 PDM-442T Tilting for Panasonic ....................................329.95 PDM-500F Flat for Sony ................................................249.95 PDM-500T Tilting for Sony ............................................329.95