Download Siemens IC60 User manual

Telephone numbers
23.6
Call divert numbers and options
This function is not in all countries activated.
Divert Number
P194E 1-2E & telephone number E
(1 = Divert ON Number; 2 = Divert OFF number) (Value 1-16 digits)
The call divert numbers are programmed at this location. They are the numbers
that must be dialed to turn the divert on or off. Option 1 turns call divert ON and
Option 2 turns the call divert OFF.
Divert Events
P192E 1-2E 1-8E
(1 = Area A Trigger Events; 2 = Area B Trigger Events)
Option
Display text
Description
1
Away Arm
Divert Arm: if this option is on then the Call-Divert On number (P194E 1E) will be
dialed when the system is armed. The User Code must have call divert assigned at
P4E option 7 for it to happen. If a User Code does not have option 7 on at P4E the
call divert number will not be dialed (used for cleaner codes and others who should
not be able to remove the call divert function).
2
Away Open
Divert on Disarm: if this option is on then the Call-Divert Off number (P194E 2E) will
be dialed when the system is disarmed. The User Code must have call divert
assigned at P4E option 7 for it to happen. If a User Code does not have option 7 on at
P4E the call divert number will not be dialed (used for cleaner codes and others who
should not be able to remove the call divert function).
3
Stay Arm
Divert on Stay Mode Arm: if this option is on then the Call-Divert On number (P194E
1E) will be dialed when the system is Armed in Stay Mode. The User Code Must have
call divert assigned at P4E option 7 for it to happen. If a User Code does not have
option 7 on at P4E the call divert number will not be dialed (used for cleaner codes
and others who should not be able to remove the call divert function).
4
Stay Open
Divert on Stay Mode Disarm: if this option is on then the Call-Divert Off number
(P194E 2E) will be when the system is Stay Mode Disarmed. The User Code must
have call divert assigned at P4E option 7 for it to happen. If a User Code does not
have option 7 on at P4E the call divert number will not be dialed (used for cleaner
codes and others who should not be able to remove the call divert function).
5
Divert if
Keyswitch
Divert on Key-switch Arm/Disarm: if this option is on then the Call-Divert On and Off
numbers (P194E 1E & 2E) will be dialed when the system is Armed or Disarmed with
the key-switch.
6
Divert if Time
Zone
Divert on time zone Arm/Disarm: if this option is on then the Call-Divert On and Off
numbers (P194E 1E & 2E) will be dialed when the system is Armed or Disarmed by a
time zone.
7
Divert if remote
Divert on DTMF or PC Arm/Disarm: if this option is on then the Call-Divert On and Off
numbers (P194E 1E & 2E) will be dialed when the system is Armed or Disarmed by a
Remote DTMF code or by a PC connection.
135
Building Technologies
Fire Safety & Security Products