Download Renault espace Specifications

CRUISE CONTROL/SPEED LIMITER: cruise control function (4/4)
Returning to the cruising speed
a 3
2
4
Putting the function on
standby
The function is set to standby if you:
– use the switch 4 (O);
– the brake pedal;
– depress the clutch pedal or the shift
into neutral if the vehicle has an automatic gearbox.
In these three cases, the cruising
speed remains stored and the message “Memorised” accompanied by this
speed appears on the instrument panel.
Standby is confirmed by the display of
the cruising speed in grey and the message “Memorised”.
2.54
If a speed is stored, it can be recalled,
once you are sure that the road conditions are suitable (traffic, road surface, weather conditions, etc.). Press
switch 3 (R) if the vehicle speed is
above 20 mph (30 km/h).
When the stored speed is recalled,
activation of the cruise control is confirmed by the illumination of the cruising speed in green, along with the message “Check cruise control”.
1
NB: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
Switching off the function
The cruise control function is deactivated if you press switch 1: in this case
a speed is no longer stored. The green
warning light and message on the
instrument panel goes out to confirm
that the function is deactivated.
When the cruise control function is
put on standby, pressing switch 2
side a (+) reactivates the cruise
control function without taking into
account the stored speed: it is the
speed at which the vehicle is moving
that is taken into account.
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
must brake by depressing the brake
pedal.