Download Sharp MD-MT99H Specifications

Insert a Master MiniDisc.
6
Load a MiniDisc for stamping.
7
Press the ENTER/SYNC button.
Do not mistake the Master MiniDisc for the target
one.
2
3
Whilst in the stop mode, press the EDIT
button to select "NAME STAMP".
Press the ENTER/SYNC button.
The unit will finish recording the character information and enter the stop mode.
To cancel the operation, press the /:OFF button.
4
Press the ENTER/SYNC button again.
5
When the unit displays "CHANGE MD", remove the master MiniDisc.
Note:
If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display "Can'tSTAMP" and turn off the power.
-Titling a MiniDisc-
1
Operation of the MiniDisc for stamping
Advanced Features
Master MiniDisc operation
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
Remove it without turning off the power. Or, the operation will be cancelled.
Web-site: www.sharp.co.uk/support
Help Line: 08705 274277 (office hours)
01/4/4
99UK_5.fm
39