Download Blastrac bg-250g13 Operating instructions

Operating Instructions
General
BG-250G11/G13
November 2004
3.6 Care and maintenance
Special attendance and regular maintenance of the machine are
imperative for functioning and safety and cost effectively.
Pay attention to unusual noises or strong vibrations. Check for the
cause of any change in operation. Contact Blastrac with any questions regarding
the operation or maintenance of the machine. Never operate the machine if you
are unsure.
Be sure the BG-250G11/G13 is clean and free of any debris before operating.
Turn off the machine and check the cleanliness periodically and clean if
necessary.
The bearing unit should be lubricated at least every three months. Lubrication
intervals will be dependant on the machine usage.
Before using the machine you should always check to make sure all bolted
connections are tight and there are no lose connection on the machine. It is
important on the BG-250G13 that the battery terminals remain tight and are free
of debris. Lose battery terminal may spark causing severe injury and damage to
the machine.
© Copyright Blastrac
23
Revision (A) 12-23-04