Download Siemens SINUMERIK 802D sl Technical data

Setup functions
3.2 ToolMeasuring
3.2.2
Measure tools automatically in JOG
☑ Basic configuration
In JOG mode, the machine can automatically determine the tool compensation values for
length 1 (X-direction) or length 2 (Z-direction). To this end the SINUMERIK 802D sl pro
offers graphical support for automatic measuring and for calibrating the tool probe.
● To measure the tool length, simply move the tool near the probe.
● Click "Start". When the probe detects the tool, the controller automatically calculates the
tool geometry.
Highlight
● Speedy and precise tool measuring is standard
● Pre-installed graphic support for measuring with tool probe
SINUMERIK 802D sl pro - Turning
Control system overview for machine tools' sales people, 03/2008
13