Download Cisco 7921 User guide
Transcript
Install the lock set on the phone 1. Put the security cable around a post or through a hole in the desktop. Insert the loops at the ends of the security cable through the C-ring. 2. Insert the C-ring with cable loops through the slot on back of phone. 3. Use the combination lock to secure the ends of the C-ring around cable loops and phone. The phone is secured to the desktop area. 4. To secure the desktop charger, use a laptop cable lock. 1 2 3 181319 4 You can secure your Cisco Unified Wireless IP Phone 7921G Desktop Charger by using a laptop cable lock. The lock connects to the security slot on the side of the desktop charger, and the cable can be secured to a desktop. The diagram shows where to insert the lock. Note 10 The lock set does not include the cable lock.