Download Crestron Toolbox: Crestron Toolbox Release Notes

6/1/2011
Crestron Toolbox: Crestron Toolbox Rele…
Test Report does not append .xml when period
used in save name
"No 3D Support" should not be in EDID list of
DMTools
Supress "No Connection" string at the DM Out
of TX until Toolbox have capability to detect
the correct connection
DM-RMC-200-C looks at wrong output
resolution info
RX1-1G USB selection is available when USB
Breakaway is enabled for DM swticher
Info window is cut off at the screen boundary.
Tooltips: Info box do not remain active long
enough to read the contents
EDID Configuration: Display EDID Make and
Model in the tooltip for the output
"cannot edit EDID" warning is too aggressive
Clearly indicate HDCP/non-HDCP on all video
links
Dialog for saving configuration does not follow
the save dialog for windows.
TX-300 DVI input says HDMI even when DVI
source is present
Add warning message to image adjust page of
RMC-200-C
HDMI Deep Color Enabled selection is not
being preserved for the Output cards.
Network Setup Wizard
NSW fails on a PSPHD Crestron device in
SystemBuilder
Prodigy Connection Diagram cut off
Add more specific instructions for keypads
PMC3 (and other system types)- Instruction
link for acquire dialog does not go to specific
enough help topic
Recall previous control system address to
speed up initial detection step
New Features
GLPAC support to load programs and firmware via master
cresnet port.
Allow multiple Web and Mobility projects of the same type
to be loaded with automatic cleanup of old projects.
CLCI Mode setting via System Info and Network Tree
Functions menu.
TPMC-9/TPMC-9L support for loading project using 16-level
crestron.com/…/toolbox_2_26.html
4/147