Download Califone Got It! Specifications

Transcript
Once installed, in most cases ClickDaemon will be
automatically activated when the Got It!™ activity
starts.
NOTE:
E a ch t i m e C l i ck D a e m o n i s a c t i v at e d , t h e
r emote r eceiver’s LED will blink for a few
seconds; no messages will be transmitted
during this time. When the system is ready,
the LED will blink again, and normal message
transmission will resume.
••
To test the remote control:
With the ClickDaemon window open, remote
control testing and calibration can begin. Select a
remote control, point it at the receiver and press any
button. That remote’s unique ID number will appear
in the black window on screen, and the button on
the remote will turn red.
Display remote
control ID
Button turns red
visit us online at califone.com
Chapter 9
161