Download Automatic Technology Australia GDO-2 SecuraLift Troubleshooting guide

SmartSolar™ and Battery Back Up Compatibility (optional)
The opener can be fitted with a SmartSolar™ or Battery Back Up kit for operation in the
event of a power outage, or where mains power access is not available. NOTE: If the
door is the only entrance to the garage, and a battery back up kit is not fitted, a
keyed cable release should be fitted external to the garage.
Vacation mode
A hand held transmitter can be programmed to lock and unlock all other
transmitters that have been programmed into the openers’ memory. The vacation
mode can be used when the door is left idle for long periods of time.
Pet/Pedestrian mode
The transmitter can be programmed to open the door to an adjustable partial
height so that the family pet can enter and exit the garage at any time. You may
also wish to open the door to a height suitable only for pedestrian access.
Auto-close mode
The opener can be programmed to automatically close after an open cycle. The autoclose time is adjustable. It is compulsory to install a P.E. Beam if this mode is selected,
otherwise the door may cause personal injury or damage to property.
Photo Electric (P.E.) Beam (optional)
The opener has an input to connect a P.E. Beam for extra safety and use of the auto-close
mode.
Manual operation
The opener is equipped with a unique manual disengaging device. If the power to the opener is disrupted the
door can be put into manual mode by pulling down on the string handle on an angle towards the door. This
allows for manual operation of the door. To re-engage the opener pull the string handle away from the door.
Owner Installation Instructions GDO-9v2 SecuraLift®
7