Download broda 587 Specifications
Transcript
Diagram #17 Raised seat height Raised seat height Caster Height Adjustment: 1) Locate the three caster fork adjustment positions on the front casters, 2) Using a ½” wrench, remove the hex screw and locknut that secure the caster to the fork. 3) Raise or lower the caster to the desired position (See the seat Height combination diagram to determine the desired position) 4) Insert the hex screw and locknut through the corresponding holes and tighten the bolts. Diagram #18 Caster fork positions Mag Wheel Height Adjustment: See section 5.4 for instructions on mag wheel installation and removal. See the seat height combination diagram under section 4.7 to determine the mag wheel mounting position. 4.8 Seat Depth Adjustment The 587 offers two style seats, a strapped seat or a solid seat pan. The strapped seat is available in depths of 15.5”, 17” (standard), 18.5” and 20”. The solid seat pan is available in depths of 16” – 20” (17” standard) in one inch increments. All dimensions are approximate. Note: For a depth of 20” with a strapped back, a larger seat pan must be used. For depths of 19” and 20”, with a non strapped back, a larger seat pan must be used Seat Depth Extension for Strapped Seat 1) Remove the front strap from the seat by cutting the strap and drilling out the rivets that hold it in place with a 3/16” drill. 24 587 Tilt Wheelchair