Download Crate SPA100 User`s guide

SPA100
1/2-Rack Power Amplifier
Installations and Operation:
Stereo Operation (Two Amplifiers):
Connect one SPA100 between the left channel output of your stereo signal source and your left channel speaker(s). Connect another SPA100 between the right channel output of your stereo signal source and your right channel speaker(s). The minimum impedance
for the speaker(s) is 4 ohms for each amplifier.
LEFT SIDE AMP
LINE
INPUTS
RIGHT SIDE AMP
SPEAKER
OUTPUTS
LINE
INPUTS
USE ONLY
250V FUSE
110-120
220-240
GRAPHIC EQ
115V
60Hz
FUSE: T3AA, 250V
230V
50Hz
FUSE: T2A, 250V
4 OHMS MIN
CH.2
OUT
CH.1
OUT
CH.2
IN
CH.1
IN
8 OHM SPEAKERS
(PE12, PE15, etc.)
MIXING CONSOLE
(CSX12, CMX62, etc.)
LEFT OUT
RIGHT OUT
8
USE ONLY
250V FUSE
110-120
220-240
230V
50Hz
FUSE: T2A, 250V
4 OHMS MIN
(LS2-215, LS2-231)
SPEAKER
OUTPUTS
115V
60Hz
FUSE: T3AA, 250V
8 OHM SPEAKERS
(PE12, PE15, etc.)
LEFT
SIDE
RIGHT
SIDE