Download Cisco CallManager Release 3.0(10 Technical information

Transcript
Cisco Unified CallManager Configuration
Phone Number
Description
originalCalledPartyNumberPartition
This number identifies the partition name that is associated
with the OriginalCalledPartyNumber field. This field
uniquely identifies this number because the Cisco Unified
CallManager supports multiple Cisco Unified IP Phones with
the same extension number in different partitions.
For calls that egress through a gateway, this field specifies the
partition name that is associated with the route pattern that
pointed to the gateway.
finalCalledPartyNumberPartition
This number identifies the partition name that is associated
with the FinalCalledPartyNumber field. This field uniquely
identifies this number because the Cisco Unified CallManager
supports multiple Cisco Unified IP Phones with the same
extension number in different partitions.
For calls that egress through a gateway, this field specifies the
partition name that is associated with the route pattern that
pointed to the gateway.
lastRedirectDnPartition
This number identifies the partition name that is associated
with the LastRedirectDn field. This field uniquely identifies
this number because the Cisco Unified CallManager supports
multiple Cisco Unified IP Phones with the same extension
number in different partitions.
For calls that egress through a gateway, this field specifies the
partition name that is associated with the route pattern that
pointed to the gateway.
Timestamps
Timestamps within a CDR record appear in universal coordinated time (UTC), which is the number of
seconds since midnight on January 1, 1970. This value remains independent of daylight saving time
changes.
Unsigned 32-bit integers represent all time values. This unsigned integer value displays from the
database as a single integer. The field specifies a time_t value that is obtained from the Windows NT
(2000) system routines.
The CDR includes the following timestamps:
Field
Format
Description
dateTimeOrigination
UTC
For outgoing calls, this field designates the
time that the device goes off hook.
For incoming calls, this field designates the
time that the SETUP message is received.
Cisco Unified CallManager 4.2(3) Call Detail Record Definition
OL-10659-01
9