Download Axis 950 User`s manual

SNA
Appendix A: Trouble-shooting
Appendix A
Trouble-shooting
The Front Panel Indicators
The front panel indicators show the status of the CD-ROM server.
The indicators have the following functions:
Status indicator
remains lit
•
Status – Flashes during start-up. When the CD-ROM server is
ready for use, this light goes out.
•
CD – Lights when a readable CD-ROM is inserted into any
connected drive.
•
Network – indicates network traffic.
•
Power – indicates that power is connected to the CD-ROM
server.
If the status indicator remains lit after start-up, this may indicate an
error. Most likely there is a problem with the SCSI bus or any of the
connected CD-ROM drives. Make sure all connected drives have
unique SCSI addresses and that only the last drive in the SCSI chain is
terminated. See also “SCSI Devices and Termination” on page 12.
CD indicator off
If the CD indicator remains off when inserting a CD-ROM into a
connected drive, please check that the CD-ROM is in a supported
format (High Sierra or ISO 9660). Also check the SCSI-bus. See
“SCSI Devices and Termination” on page 12.
Network indicator off
The network indicator flashes when there is network traffic to the
CD-ROM server. If it remains off and you know there is network
traffic, check the network connection.
AXIS 850/950 User’s Manual
55