Download Brother DCP-585CW User`s guide

Printing photos from a memory card or USB Flash memory drive
Adjusting Brightness,
Contrast and Colour
Brightness
a
b
c
c
Press a or b to choose
White Balance, Sharpness or
Color Density.
d
Press d or c to adjust the degree of the
setting.
Press OK.
e
Do one of the following:
5
5
Press a or b to choose Brightness.
Press d or c to make a darker or lighter
print.
Press OK.
„ If you want to customize another
colour enhancement, press a or b to
choose another option.
If you do not want to change additional
settings, press Colour Start to print.
Contrast
„ If you want to change other settings,
press a or b to choose Exit, and
then press OK.
5
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a
b
Press a or b to choose Contrast.
c
If you do not want to change additional
settings, press Colour Start to print.
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a
Press a or b to choose
Color Enhance.
Press OK.
b
Do one of the following:
„ If you want to customize the White
Balance, Sharpness or Colour
Density, press d or c to choose On,
and then go to step c.
„ If you do not want to customize,
press d or c to choose Off.
If you do not want to change additional
settings, press Colour Start to print.
Note
• White Balance
Press d to c to change the contrast.
Press OK.
Colour Enhancement
f
5
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.
Press OK and then go to step f.
47
5