Download Rac RACHP133 Operating instructions

1300W Pressure Washer
RACHP133A
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
SAFETY AND WARNING INFORMATION
General Safety Rules
WARNING: Read the instructions fully before using the product for the first time. Failure to follow the
instructions may result in fire, electric shock and or serious injury.
We recommend the user wears safety equipment during use.
We recommend the product be used with a RCD (Residual Current Device).
Please Retain These Instructions For Future Use And Referral
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• When operating the unit in high pressure mode the lance may cause kickback. Therefore please ensure that
you hold the spray gun firmly. When using the unit we recommend that other people are at least 10m away
from the working area.
• High-pressure jets can be dangerous if misused. The jet MUST NOT be directed at yourself, other people,
animals, live electrical equipment or the pressure washer itself. The trigger gun safety lock prevents the trigger
from accidentally being engaged. This safety feature does not lock trigger in the ‘on’ position.
• Do not use the pressure washer if the supply cord or other important parts are damaged (e.g. high pressure
lance or hoses). Never carry your pressure washer by the cord.
• Do not disconnect the high-pressure hose whilst the system is under pressure. This system is capable of
producing 1600PSI. To avoid rupture and injury, do not operate this pump with components rated less than
1600PSI working pressure (including but not limited to spray guns, hose and hose connections.)
• Do not use acids or flammable liquids in the machine.
• When using a pressure washer always ensure that your water connection is protected by a backflow preventer
(as per water byelaws). This will avoid possible contamination of your water supply. Use cold water feed only.
• Protect the unit against freezing, avoid storing the machine where it may be susceptible to frost.
• Prior to starting the pressure washer in cold weather, be sure ice has not formed in any part of the equipment.
• The unit must continuously run with water. Dry running will cause serious damage to the seals.
IMPORTANT: The pressure washer is equipped with an auto stop device. When the trigger is released it will
open the power circuit to the motor and cause the pressure washer motor to stop. The motor will resume when
the trigger is pulled. The pressure washer is also equipped with a main power ON/OFF switch located on the
unit. It should always be moved to OFF position when the pressure washer is not being used.
This product is a class II product-double insulated. No means of grounding (to earth) is provided on this
product nor should it be added. Only a qualified person should carry out servicing. If an extension lead is
to be used with this product, please ensure:
Use only extension cords that are intended for outdoor use.
Completely unwind the cable from the drum to allow for full current rating of the extension cable.
To reduce the risk of electrocution, keep all connections dry and off the ground.
Do not touch plug with wet hands
Hose: Water supply hose must be at least ½” in diameter with a minimum recommended length of 7.5 meters
and be fitted with a suitable coupling that matches the male quick fit connector.
• Use only original spare parts from the manufacturer or approved by the manufacturer.
• WARNING: High pressure hoses, fittings and couplings are important for the safety of the appliance.
-1-
COMPONENTS
4
18
14
11
8
10
15
16
1
9
2
3
1. ON/OFF Switch
2. Water supply inlet
3. High pressure outlet
4. High pressure hose
5. Quick fit connector (Male)
6. Inlet filter
7. Cleaning needle
8. High pressure lance
9. Trigger gun
17
12
6
13
5
10. Lance holder
11. Cable holder
12. Base Frame
13. Screws (x3)
14. Fixed Brush
15. Turbo Lance
16. Patio cleaner extension
17. Patio cleaner
18.Top Handle
NOTE: This Pressure Washer is NOT supplied with a detergent bottle.
Technical specification
Rated voltage:
Rated power:
Rated frequency:
Protection class:
Degree of protection:
Max pressure:
Rated pressure:
Max Inlet pressure:
Vibration:
Max supply water temperature:
230V ac
1300W
50Hz
II
IPX5
10Mpa
7Mpa
0.7Mpa
αh=1.2 m/s²
0-40°C
Nozzle spray angle:
Max output flow rate:
Cable length:
Hose length:
Noise value:
Noise value:
-2-
0-90 degree
5.5/min
5m
5m
75Lpa dB (A)
90Lwa dB (A)
7
ASSEMBLY
WARNING
Before carrying out any assembly or disassembly of this unit, ensure it is disconnected from the electrical supply.
Assembling your machine
4. Mounting of trolley handle (models with
trolley handle)
Place the top handle (14) on the machine.
Secure the handle by using 2 screws (13).
1. Mounting of lance holder
Press the lance holder (10) on to the machine.
10
2. Mounting of cable holder
Press the cable holder (11) on to the machine.
5. Connecting the quick fit connector (5)
Screw the male quick fit connector (5) tight on to
the water inlet (2).
5
11
3. Mounting the base frame
Mount the base frame (12) by pressing it into
the guide at the bottom of the machine and
retain with screw (13).
Mount the wheels by pressing them into the
base frame.
Note: The inlet filter (6) must always be fitted in
the water supply inlet pipe to filter out debris and
other impurities as these will damage the pump
valves.
Caution: Failure to fit the filter will
Invalidate the guarantee.
12
-3-
ASSEMBLY (cont)
6. Connection of high pressure hose
Mount the high pressure hose (4) onto the high
pressure outlet (3).
3
4
7. Fitting the high pressure lance
Push the high pressure lance (8) into the trigger
gun (9) then turn to lock in.
8
9
8. Water connection
Fit a standard 1/2” garden hose. A min length of
5m and max length of 25m will be suitable.
5
-4-
OPERATING INSTRUCTIONS
Note:
Before connecting to the mains power supply
please ensure that the ON / OFF switch (1)
is in the OFF position and the water supply is
connected and is turned on.
Helpful Hints
Before starting cleaning remove any objects which
could create a hazard.
Ensure that all doors and windows are closed
(where appropriate).
The adjustable lance allows you to use a variety of
spray patterns from a fan to a pencil jet.
When using the pressure washer to clean decking,
patios, vehicles, etc., always start by using the
fan spray and begin spraying from a minimum
30cm away to avoid damaging the surface of the
material to be cleaned.
WARNING: Running the pressure washer without
any water supplied to it will damage the pump.
1
Instructions for use
a)With the unit fully assembled, ensure that the
unit is switched OFF and is connected to the
mains supply and the water supply. Pull the
trigger a few times to expel any air trapped in
the system.
b) Ensuring that the trigger is released, switch ON
the pressure washer. The unit is now ready to
operate by pulling the trigger.
Warning: Always check that NO damage can
occur to the items you are intending to clean.
Always use safety wear for your personal
protection.
General applications for this product are domestic
cleaning tasks: Cars, motorbikes, caravans, and
boats
Patio’s, fences, garden walls, pathway, driveways
– particularly block driveways Roofs, brickwork
and guttering Garden tools, furniture and
barbecues Animal pens
Note:
The motor only runs when the trigger is operated.
When the pressure washer is not in use, actuate
the trigger gun lock for safety reasons . Switch the
unit OFF when not in use for extended periods of
time. Never operate the pressure washer without
the water supply connected and turned on.
Trigger
Gun Lock
-5-
Fixed Brush
Your RAC pressure washer is supplied with a
fixed brush (14). This has soft bristles; this is
ideal for cleaning car bodywork, windows etc.
The brush connects directly to the trigger gun
(9).
WARNING
- Ensure the brush is clean and free from debris
- Ensure the surface to be cleaned is sound and
will not be damaged by the brushing action. Test
on an inconspicuous area first
- Any grit or debris on the surface to be cleaned
or in the brush can cause damage to that
surface. Please ensure both are checked prior
to cleaning.
16
17
Patio Cleaner: Assembly
1. Fit the patio cleaner extension (16) onto the
patio cleaner (17).
Push and turn to lock the bayonet fitting.
Note: Prior to using the patio cleaner always
check that you will not damage the surface area
on an inconspicuous test area first.
16
17
Turbo Lance
The turbo lance (15), sometimes referred to as
a rotary nozzle, is a very effective tool that can
significantly reduce cleaning time. It combines
the power of a narrow high impact stream and
the efficiency of a 25 degree fan pattern. This
swirls the narrow high impact stream into a cone
shape that cleans a larger area. The turbo lance
connects directly to the trigger gun (9).
2. Connect the trigger gun (9) on to the patio
cleaner extension (16).
Note: All these fittings are bayonet fittings which
push in then twist to lock.
CAUTION: Since a turbo nozzle uses a narrow
high impact stream, only use it in applications
where the cleaning surface cannot be damaged
by a narrow high impact spray. Note: The turbo
nozzle is NOT adjustable.
-6-
HOW TO AVOID DAMAGING SURFACES
Damage to cleaning surfaces occurs because the impact force of the water exceeds the durability of the
surface. Never use a narrow high impact stream or a turbo/ rotary nozzle on a surface that is susceptible
to damage. Avoid spraying windows with a narrow high impact stream or turbo nozzle as this may cause
breakage.
The surest way to avoid damaging surfaces is to follow these steps:
1. Before triggering the gun, adjust the nozzle to a wide fan pattern.
2. Place the nozzle approximately 4-5 feet cleaning surface and begin spraying.
3. Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning
efficiency is achieved without damaging the surface.
TIPS FOR EXTENDING THE LIFE OF YOUR
PRESSURE WASHER
1. Never operate the unit without water.
2. This pressure washer is not designed to pump hot water. Never connect it to the hot water supply –
this will significantly reduce the life of the pump.
WARNING
3. Never operate the unit for more than one (1) minute without spraying water. Otherwise, the resulting
heat build up will damage the pump.
4. Winter Storage:
For storage during the winter months we recommend the use of a solution of 50/50 mix of antifreeze
and water. This will keep the pump from freezing and getting damaged and will protect the internal
components.
Method: You will need a length of garden hose
and a funnel. Attach the garden hose to the
inlet and pour the antifreeze into the unit via the funnel.
Switch the unit on for a few seconds to allow the solution to flow through the system.
Disconnect your pressure washer from the mains power, then pack away in your storage area.
WARNING: Before reusing completely flush the unit out with plain water. Anti-freeze can damage
paintwork so you must ensure there is no antifreeze left in the system before using it again.
NOZZLE CLEANING INSTRUCTIONS
A clogged or partially clogged nozzle can cause a significant reduction of water coming out of the nozzle
and cause the unit to pulsate while spraying. To clean out the nozzle:
• Turn off and unplug the unit.
• Turn off the water supply and relieve any pressure
within the unit by squeezing the trigger 2-3 times
• Separate the lance from the gun.
• Rotate the nozzle to the narrow stream setting.
This opens up the fan blades.
• Using the cleaning needle (7) or an unfolded
paper clip, insert the needle into the nozzle hole
and move it back and forth until the debris is
dislodged.
-7-
Troubleshooting chart
Symptom
Possible cause (s)
Corrective Action(s)
Pressure washer does
not start
1. Unit is pressurized
2. Poor plug connection or faulty
outlet socket
3. Extension cord too long or
undersized
4. Main voltage supply too low
1. Squeeze trigger on gun
2. Check plug, socket
3. Remove extension cord
4. Check that main supply voltage is
adequate
Pump does not reach
necessary pressure
1. Water inlet filter is clogged
2. Pump sucking air from hose
connections
1. Clean water inlet filter
2. Check that connections and
locking ring are properly tightened
Fluctuating pressure
1. Pump sucking in air
1. Check that hoses and connections
are tight
2. Clear blockage with cleaning
needle (see page 5)
2. Clogged nozzle
Motor stops suddenly
1. Extension cord too long or
undersized
1. Remove extension cord
Plug fitting
Note: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and
severed cable, it must be destroyed to prevent engaging into a socket. If the supply cord is damaged it
must be replaced by a service agent or similarly qualified person if order to avoid hazard. Your pressure
washer is supplied with a fitted plug, however if you should need to fit a new plug follow the instruction
below. If in doubt consult a qualified electrician.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue - Neutral Brown - Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be connected to
the terminal which is marked with N or coloured black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or coloured
red. No connection is to be made to the earth terminal
of the plug. If a 13 AMP (BS 1363/A) plug is used, a 13
AMP fuse must be fitted, or if any other type of plug is
used a 13 AMP fuse must be fitted, either in the plug, or
adaptor or on the distribution board.
-8-
WARNING SYMBOLS
The following warning symbols are to remind you of safety precautions you should
take when using this pressure washer
WARNING:
Do not direct the water jet towards other people,
animals, the washer itself, its electrical parts, or
other electrical equipment.
WARNING
This product is guaranteed for domestic use only for a period of 12 months against faulty manufacture or materials.
Any other use may invalidate the guarantee. This product is not guaranteed for HIRE purposes.
This guarantee does not affect the statutory rights of the consumer.
If there is something about our product that you don’t understand and you live in the UK,
you can contact our helpline during office hours, 9am – 4pm, Monday-Friday.
Calls are charged at standard rates.
Outside of office hours or during peak times you will be directed to an answer phone.
Please leave your name, a brief description of your enquiry and your phone number.
One of our operators will attempt to contact you back as soon as possible.
Helpline Telephone Number 02083 916 767
Alternatively check the Q&A on our website www.hilka.co.uk/faq.php
NOTE:
These important safeguards and instructions cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution are factors, which cannot
be built into any product. These factors must be supplied by the person using this product.
Produced under license for Halco
Products Ltd Booths Hall, Booths Park,
Chelford Road, Knutsford, Cheshire
WA16 8QZ England
RACHP133A - Issue 2 - 09-02-11