Download MODEL MPL PENINSULA

FIREPLACE COMPONENTS
MODEL NUMBER DESCRIPTION
MPL
L48
L36
L18
L12
LE30
LSC
LC
LCL
612
1212
LF-FS-2
LFSQT
TL
FP-4-U
403
LCLF
AK4
WH22
WH36
7
53D9042. Rev 1 03/03
Peninsula Style Fireplace
4-foot chimney section (11-inch-diameter flue).
3-foot chimney section (11-inch-diameter flue).
1-1/2 foot chimney section (11-inch-diameter flue).
1-foot chimney section (11-inch-diameter flue).
One pair of 30-degree elbows. Maximum -- two pairs (4 elbows per chimney).
Chimney support (required when chimney height exceeds 30 feet).
Round chimney cap for contemporary installations. Includes storm collar.
Round telescoping chimney cap. For use with flat chase top terminations.
0-6/12 pitch flashing for contemporary installation.
6/12 - 12/12 pitch flashing for contemporary installation.
17-inch firestop spacer. One required at each ceiling or floor level.
Square termination for chase installation. Model TL telescope assembly required but not
included.
Telescope assembly for use with LFSQT Square Cap and “L” series chimney.
4-inch insulated combustion air duct -- 8 foot lengths.
4-inch duct connector (for splicing FP-4 ducts). Includes two clamps.
3’ x 7’ Flat Chase Flashing. For use with LCL chimney cap.
4-inches outside combustion assembly.
End glass door assembly (1 Required).
Glass door assembly (2 required).