Download Sharp AR-C240P Specifications

APPENDIX C ERROR MESSAGES
1.
Error messages
(Caution) * : Raise in the factory mode only.
** : Not raise in the standard config machines.
Err
Code
LED
Ready
LED
Atten
300 POWER OFF/ON
300:NETWORK ERROR
OFF
Blink
A network error is occurring.
310 CLOSE COVER
310:UPPER COVER OPEN
OFF
Blink
The cover is open.
311 CLOSE COVER
311:SIDE COVER OPEN
OFF
Blink
The cover is open.(PX711)
311 CLOSE COVER
311:SIDE COVER OPEN
OFF
Blink
The cover is open.(PX713)
312 CLOSE COVER
312:TRAY2 COVER OPEN
OFF
Blink
The cover is open.
313 CLOSE COVER
313:TRAY3 COVER OPEN
OFF
Blink
The cover is open.
314 CLOSE COVER
314:TRAY4 COVER OPEN
OFF
Blink
The cover is open.
315 CLOSE COVER
315:TRAY5 COVER OPEN
OFF
Blink
The cover is open.
320 CHECK FUSER UNIT
320:FUSER UNIT MISSING
OFF
Blink
The fuser unit is not correctly installed
321 POWER OFF AND WAIT FOR
A WHILE
321:MOTOR OVERHEAT
OFF
Blink
Motor (Driver LSD) overheat error
323 OPEN AND CLOSE COVER
323:PAPER THICK ERROR
OFF
Blink
A Sensor output at Medea Empty is
outside the spec.(factory mode only
raise)
324 OPEN AND CLOSE COVER
324:PAPER THICK ERROR
OFF
Blink
325 OPEN AND CLOSE COVER
325:PAPER THICK ERROR
OFF
Blink
Media detected values are outside the
spec.
326 OPEN AND CLOSE COVER
326:PAPER THICK ERROR
OFF
Blink
Media detected values in U-Heavy
Mode are outside the spec.
327 DOWNLOAD CHIP DATA
327:DENSITY CALIBRATION
*
CHIP ERROR
OFF
Blink
Density Adjustment’s calibration chip
correction errorOmission of factory
default setting. To prevent setting
mistake.Error that does not occur at
user level.Displayed only in Factory
Mode.
LCD Messages
Description
Comments
Anomalies
with Media
Weight
Detection
The difference among Sensor outputs is sensor.
outside the spec.(factory mode only
raise)
165/