Download Dieci Pegasus Specifications

- DANGER
Do not reach excessive speeds.
Do not drive with the brake pedal pressed.
- DANGER
Do not use the force of impact of the vehicle to perform jobs. These vehicles are not designed for this use.
Use of this type could lead to the vehicle rolling over, damage or breakage of some components and tools or
serious injury to the operator.
- DANGER
Always operate with bonnets and door closed.
Do not operate with vehicle protections removed.
- ATTENTION
When working in a crowded area, appoint a person to give signals and to co-ordinate the work area.
Make sure that all staff follows the instructions given by the person assigned to signalling.
Make sure signals are used that are in compliance with the provisions in force in the country where the vehicle
operates.
For further information regarding the presence of a person assigned to signalling, consult the “Signalling to
several vehicles” chapter.
- DANGER
Pay attention when working on the edge of an excavation, a road or on soft ground: keep at a safe distance,
the vehicle could roll over.
Engage a person on the ground to give signals.
Do not forget that after heavy rain, use of explosives or earthquakes, the land in those areas is more fragile.
- DANGER
When working on the upper part or inside of the floors of a building or other structures, check the capacity and
stability of the same before starting the operations. There is a risk that the buildings may collapse, obviously
causing serious injuries and damage.
- DANGER
Working on slopes can be dangerous. The conditions of the land change according to atmospheric conditions
(e.g. rain, snow, ice). Pay great attention to the conditions of the land on which work is being performed and
proceed at low speed.
- ATTENTION
Move slowly over grass, leaves and wet steel sheets. With a slight slope there is also the risk of the vehicle
slipping or loosing its equilibrium and rolling over.
- ATTENTION
The tipping conditions of the vehicle can vary depending on the features of the ground, environmental
conditions and the type of work.
Complying with all the safety instructions contained in this manual reduces risks for the vehicle and for the
operator in most of the operating conditions carried in the manual.
120