Download Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V User guide

Table 5
Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue
Status
Created an user defined account using
userConfig command, after
firmwaredowngrade to v4.2.x, still able
to login with this user defined account
Fixed.
Standby CP getting "Failed expression"
error in rcs_ha.c.
Fixed.
The problem happens intermittently.
The last time this problem happens
when both CPs are rebooted almost at
the same time. A message showed up
on standby CP console. The end result
is that standby CP cannot sync up with
the active CP.
Created user defined account using the
userconfig command,
firmwaredowngrade to v4.2.x then
firmwareupgrade back to v4.3.x. After
the upgrade, the user defined account
does not exist.
Fixed.
trapReg mib variable is giving trap
recipients details for SNMPv1 alone. It
has to be implemented for SNMPv3
also.
Fixed.
After disabling Port Log through API
and going to telnet session, doing
portLogClear will enable port log !
Fixed.
Application 'evmd'(pid 890) got
exception 11 and SWD panic on evmd
occurred right after coredump.
Fixed.
Illegal HBA registration.
Fixed.
HBA is allowed to register even though
the originating port is not in the HBA's
registered port list.
Fabric OS 4.4.x release notes
41