Download Prodeco Technologies Phantom X3 User guide

j)
Maintenance schedule: As a common practice you should follow your maintenance schedule. You
should study it and allow it to become second nature to your riding.
Maintenance Schedule
Tire Pressure
Tire Condition
Visual Inspection
Brake Lever Pressure
Quick Releases
Handlebar Alignment
Saddle Alignment
Battery Pack Locked
Wheel Check
Inspect Frame Condition (include welds for fissures)
Clean and Lubricate Chain
Check Brake Pads
Lubricate Forks
Lubricate Brakes & Cables
Lubricate Folding Mechanism
Check All Bolts and Torque Settings
Clean Bicycle
Charge Battery
Check Wheel Spokes
Inspect Rim Condition
Inspect Saddle, Rails and Clamp
Grease Pedal Bearings
Check HUB Bearings
Check Headset Bearings
Check Bottom Bracket Bearings
Replace Brake Pads
Replace Brake Cables (depends on use)
Replace Tires (depends on use)
Each Ride
X
X
X
X
X
X
X
X
X
Weekly
X
X
X
Monthly
6 Months
X
X
X
X
X
X
X
X
X
X
X
X
X
Yearly
X
X
X
k) Torque specifications for common parts: Nuts and bolts for your bicycle are set to standard torque settings
at the factory. Over time of use and shipping, settings may change and nut or bolt could become loose. Below is a chart on the
torque settings in Lb per Inch for the common parts of the Phantom. They have also been converted to Lb per Foot and NM.
Torque Item
lb per In
Axle nut (front motor)
250 lb*in
Bottom bracket
420 lb*in
Brake lever clamps (at handlebar)
55 lb*in
Cassette/Freewheel
300 lb*in
Chainring bolts
80 lb*in
Crank bolt
350 lb*in
Crank bolt cap (if applicable)
100 lb*in
Derailleur bolt
80 lb*in
Disc brake caliper bolts (at frame)
80 lb*in
Disc rotor bolts
55 lb*in
Disc Brake Cable Arms (pinch bolt)
55 lb*in
Headset locknut
150 lb*in
Kickstand bolt
100 lb*in
Pedals
300 lb*in
Saddle rail clamp bolts (M6)
140 lb*in
Shifter (at handlebar)
20 lb*in
Stem adjustable bolts
150 lb*in
Stem clamp binder bolts (4 bolts)
60 lb*in
Stem quill bolt
250 lb*in
Throttle
25 lb*in
V brake bolts (at frame)
80 lb*in
Quick Release (at half way tighten the lever with resistance)
lb per Ft
20.8 lb*ft
35 lb*ft
4.6 lb*ft
25 lb*ft
6.7 lb*ft
29.2 lb*ft
8.3 lb*ft
6.7 lb*ft
6.7 lb*ft
4.6 lb*ft
4.6 lb*ft
12.5 lb*ft
8.3 lb*ft
25 lb*ft
11.7 lb*ft
1.7 lb*ft
12.5 lb*ft
5 lb*ft
20.8 lb*ft
2.1 lb*ft
6.7 lb*ft
NM
28.25
47.46
6.21
33.9
9.04
39.54
11.3
9.04
9.04
6.21
6.21
16.95
11.3
33.9
15.82
2.26
16.95
6.78
28.25
2.825
9.04
22