Download Eclipse P306 / P307 OEM Modules

Chapter 2: Board Overview
Relevant Device Eclipse Pins
USB Device +
USB Device –
USB+ Host
USB– Host
Device can use USB Type-B or
Mini-B connectors. If Mini-B
is used, “ID” pin 4 is NOT CONNECTED.
Normally, a device uses 5 V; however,
since Eclipse uses more than 500 mA
(2.5 W) it cannot use the BUS-supplied
5 V and therefore it is not connected
Figure 2-6: Eclipse USB device design example
Eclipse Integrator Guide
16
PN 875-0343-0 Rev A1