Download Dynex DX-800U User guide

V1
FINAL
FOR PRINT
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 1 Thursday, July 22, 2010 10:30 AM
32" LCD TV
DX-32L152A11
USER GUIDE
DX-32L152A11_10-0615_MAN_ENG_V1.book Page ii Thursday, July 22, 2010 10:30 AM
ii
Dynex DX-32L152A11
32" LCD TV
Contents
CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installing and removing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Removing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front and side controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Back connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Programming a universal remote control to work with your TV . . . . . . . . . .7
Making connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting an HDMI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting a component video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting an antenna, cable TV, or satellite TV box . . . . . . . . . . . . . . . . . . . .8
Connecting a VCR, camcorder, or game console . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting a home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying program information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
11
11
11
11
12
12
Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Choosing the display format (aspect ratio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the audio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting TV settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DX-32L152A11_10-0615_MAN_ENG_V1.book Page iii Thursday, July 22, 2010 10:30 AM
iii
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
US and Canada Markets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Mexico Market . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DX-32L152A11_10-0615_MAN_ENG_V1.book Page iv Thursday, July 22, 2010 10:30 AM
iv
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 1 Thursday, July 22, 2010 10:30 AM
DX-32L152A11
1
f
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children climb on or play with entertainment system
furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory as suitable for your TV.
•
Follow all instructions supplied by the TV and wall mount manufacturers.
•
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 2 Thursday, July 22, 2010 10:30 AM
2
DX-32L152A11
Important safety instructions
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete
outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to S3125A
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
The wall plug is the disconnecting device. The plug must remain
readily operable.
An apparatus with a three-prong, grounding-type plug is a Class I
apparatus, which needs to be grounded to prevent possible
electric shock. Make sure that you connect this Class I television
to a grounding-type, three-prong outlet.
Remote control batteries should not be exposed to excessive heat
such as sunshine, fire, or the like.
Important safety instructions
18 The apparatus should not be exposed to dripping or splashing,
and no objects filled with liquids, such as vases, should be placed
on the apparatus.
Warnings
Electric shock hazard
To reduce the risk of fire or electric shock, do not remove any cover or
expose the device to rain or moisture. No user-serviceable parts are
inside. Refer servicing to qualified service technicians.
Lightning
For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
• If the LCD panel is broken, make absolutely sure that you do not
touch the liquid in the panel. This may cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service
technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, personal injury, or other
hazards.
Safety check
After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 3 Thursday, July 22, 2010 10:30 AM
Installing and removing the stand
DX-32L152A11
Cautions
Damage requiring service
Unplug this TV from the power outlet and refer servicing to qualified
service personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled or objects have fallen into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore your TV to its normal
operation.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
1
2
3
3
Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.
End of life directives
Your TV contains tin-lead solder and a fluorescent lamp containing a
small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at www.eia.org to
find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors, which
provide exceptionally sharp video quality. Occasionally, a few
non-active pixels may appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely affect the performance
of your TV, and are not considered defects.
Accessories
Make sure the following accessories are included in the box with your
TV:
• Remote control
• Composite video and audio cable
• AAA batteries (2)
• Stand
• Quick Setup Guide
4
5
7
6
1
Antenna lead-in wire
2
Grounding clamp
3
Antenna discharge unit
4
Grounding conductors
5
Ground clamps
6
Power service grounding electrode
system
7
Electric service equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
guidance for correct grounding. Specifically, it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.
Installing and removing the
stand
You must install your TV into the stand in order for it to stand upright on
a cabinet or other flat surface. If you intend to mount your TV on a wall
or other vertical surface, you must remove the stand column.
Warning: Before attampting assembly or removal of the stand, unplug
the AC power cord.
Cautions:
• Read these instructions carefully before you try to assemble the stand
or remove the stand column.
• Make sure that you handle the TV carefully when attempting to
assemble or remove the stand. If you are not sure of your ability to do
this, contact a professional installer or service technician. Dynex is
not responsible for any damages or injuries that occur because of
mishandling or incorrect assembly.
• Use a soft cushion or covering to prevent scratching or damage to the
TV screen or cabinet.
Installing the stand
Note: Your TV may differ from the illustrations shown.
To install the stand:
1 Remove the stand from the box and place it on a table or bench.
2 Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 4 Thursday, July 22, 2010 10:30 AM
4
DX-32L152A11
TV components
3 Align the base with the TV, then secure the stand to the TV with
the three screws (ST4 x 14) provided.
Baseplate
ST4 screws (3)
3 Secure the wall-mount bracket to the back of your TV using the
four screws provided with the bracket.
TV components
Front and side controls
4 Carefully lift the TV into an upright position.
To remove the stand, see the following procedure.
Removing the stand
You must remove the stand before you can wall-mount the TV.
Note: Your TV may differ from the illustrations shown.
To remove the stand:
1 Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
2 Remove the three screws holding the stand to the TV, then
remove the stand.
Item Name
Installing a wall-mount bracket
Description
1
Power indicator
Lights red when your TV is in standby mode.
Turns off when the TV is on.
2
Remote control
sensor
Receives signals from the remote control.
Do not block. For more information, see
“Aiming the remote control” on page 7.
3
MENU
Press to open the on-screen menu.
4
INPUT
Press to open the INPUT SOURCE menu.
For more information, see “Selecting the
video input source” on page 11.
5
VOL / VOL
In TV mode, press to increase or decrease
the volume.
In menu mode, press to move right or left or
to adjust menu settings.
6
CH
In TV mode, press to select the next or
previous channel.
In menu mode, press to move up or down.
/CH
If you want to attach the TV to a wall-mount bracket (not provided), you
should first remove the stand, if it has been installed.
Warning: These instructions are for use by qualified service personnel
only. To reduce the risk of hazards, do not perform any servicing other
than that contained in the operating instructions unless you are
qualified to do so.
To install a wall-mount bracket:
1 Lay your TV face down on a table or bench. Make sure that you
put down a soft cushion or cloth so that your TV is not scratched.
2 Remove the pedestal stand. See “Removing the stand” above.
7
(power)
Press to turn on the TV or put the TV in
standby mode.
Caution: The TV continues to receive power
even in standby mode. Unplug the power
cord to disconnect power.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 5 Thursday, July 22, 2010 10:30 AM
TV components
DX-32L152A11
5
Back connections
PC/DVI AUDIO IN VGA
SERVICE
Item Name
HDMI2
HDMI 1
Description
1
SERVICE
PORT
2
HDMI 2 and Connect an HDMI device to one of these jacks.
HDMI 1 jacks For more information, see “Connecting an HDMI
device” on page 8.
3
PC/DVI
AUDIO IN
jacks
VGA IN jack
4
(headphone)
jack
VIDEO
L
R
L
Y
Pb
Pr
R
ANT/CABLE IN
DIGITAL
AUDIO OUT
Remote control
For software updates only. Do not use.
INPUT
TV
Connect a computer (audio and video) to these
jacks. For more information, see “Connecting a
computer” on page 9.
VIDEO
COMP
HDMI
VGA
ZOOM
GUIDE
PICTURE
AUDIO
INFO
5
6
AV IN jacks
7
COMPONENT Connect component audio to these jacks. For
more information, see “Connecting a component
AUDIO IN
video device” on page 8.
jacks
8
ANT/CABLE
IN jack
CH
VOL
Plug headphones into this jack. For more
information, see “Connecting headphones” on
page 10.
COMPONENT Connect component video devices to these
IN jacks
jacks. For more information, see “Connecting a
component video device” on page 8.
9
AV
COMP
MUTE
MENU
Connect a standard AV device, such as a
camcorder or game console, to these jacks.
EXIT
ENTER
Connect an antenna or cable TV to this jack. For
more information, see “Connecting an antenna,
cable TV, or satellite TV box” on page 8.
Connect a digital coaxial cable to this connector,
DIGITAL
then to a digital sound system. For more
AUDIO
OUTPUT jack information, see “Connecting using a digital
audio cable” on page 10.
1
2
3
4
5
6
7
8
9
0
RECALL
CCD
MTS/SAP
TIME
SLEEP
5
EN-31203B
Item Name
Description
1
POWER
Press to turn on the TV or put the TV in standby
mode.
Caution: The TV continues to receive power
even in standby mode. Unplug the power cord
to disconnect power.
2
COMP
Press to select the device connected to the
COMPONENT IN jacks
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 6 Thursday, July 22, 2010 10:30 AM
6
DX-32L152A11
Item Name
Using the remote control
Description
Item Name
Description
INFO
Press to display the information banner. For
more information, see “Displaying program
information” on page 11.
MUTE
Press to mute the sound. Press again to restore
the sound.
3
VIDEO
Press to select the device connected to the AV
IN jack.
ZOOM
Press to select the video display format. For
more information, see “To adjust the picture:”
on page 13.
22
4
GUIDE
Press to open the DTV program guide (if
available). For more information, see
“Displaying program information” on page 11.
23 EXIT
Press to close the on-screen menu.
5
Press to increase or decrease the volume.
24 RECALL
Press to go to the last viewed channel. For more
information, see “Selecting a channel” on
page 11.
25 TIME
Press to display the current time.
26 SLEEP
Press to set the sleep timer. For more
information, see “Adjusting TV settings” on
page 15.
6
VOL
VOL
7
MENU
/
Press to open the on-screen menu.
Press or
menus.
8
9
to move up or down in on-screen
Press or to move left or right in on-screen
menus or to adjust menu settings.
ENTER
10 Numbers
Press to confirm selections in on-screen menus
or to open sub-menus.
Using the remote control
Press the number buttons to enter channel
numbers or the parental control password.
For more information, see “Selecting a channel”
on page 11.
Installing remote control batteries
Press to select a digital sub-channel.
11 . (dot)
To install remote control batteries:
1 Press down on the battery compartment cover lock, then remove
the remote control cover.
After pressing the GUIDE button in the digital
Program guide TV channel option, the same color buttons will
12 (EPG) function appear with explanations in the on-screen
display (OSD). Follow the steps shown in the
buttons
OSD.
13 CCD
Press to turn closed captioning on or off. For
more information, see “Adjusting TV settings”
on page 15.
14 MTS/SAP
In analog TV mode, press to select STEREO,
SAP (secondary audio language), or MONO.
In digital TV mode (DTV), press to select the
audio track. For more information, see
“Selecting the audio mode” on page 13.
15 TV
Press to select the TV as the video input source.
For more information, see “Selecting the video
input source” on page 11.
16 INPUT
Press to open the INPUT SOURCE menu, then
press or to select the video input source
you want. For more information, see “Selecting
the video input source” on page 11.
17 HDMI
Press once to select a device connected to the
HDMI 1 jack.
Press twice to select a device connected to the
HDMI 2 jack.
18 VGA
Press to select VGA mode.
19 AUDIO
Press to select the sound mode. You can select
Standard, Speech, User, and Music. For more
information, see “Selecting the audio mode” on
page 13.
20 PICTURE
Press to select the video mode. You can select
Vivid, Standard, Theater, Energy Saving,
Sports, and Custom. For more information, see
“Adjusting the picture” on page 13.
21 CH
Press to go to the next or previous channel in
the channel list. For more information, see
“Turning on your TV for the first time” on
page 10 and “Selecting a channel” on page 11.
/ CH
2 Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the cover. Make sure that the lock snaps into place.
Battery precautions:
• Dispose of batteries as hazardous waste.
• Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and can cause old batteries to leak.
• Remove batteries as soon as they become inoperable. Chemicals that
can leak from the batteries can cause a rash. If the batteries leak,
clean the battery compartment with a cloth.
• If the remote control is not used for an extended period of time,
remove the batteries.
• Do not expose batteries to excessive heat such as sunshine, fire, or
other heat sources.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 7 Thursday, July 22, 2010 10:30 AM
Making connections
DX-32L152A11
Aiming the remote control
7
Codes for other remote controls are available online at:
http://www.dynexproducts.com/universalcontrolcodes.aspx
To aim the remote control:
• Point the remote control towards the remote sensor on the front
of your TV.
Tips:
• The brand name is often visible on the front of the universal remote
control, and the model number is often visible on the back.
• The codes shown above are common codes, but are subject to change.
Please refer to Dynexproducts.com for the most up to date codes.
• If your universal remote control isn’t listed on the chart, refer to your
universal remote control’s instructions and try codes for the brands
Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need
to try several codes before finding a match.
2 Follow your universal remote control’s instructions to enter the
code you found in Step 1.
Tips:
• If your universal remote control has a code search feature, run a code
search to identify a code that matches your TV. See your universal
remote control’s instructions for details.
• If your universal remote control has a “learn” feature, you can
manually program it using your TV remote to “teach” the commands
one at a time. See your universal remote control’s instructions for
details.
INPUT
TV
VIDEO
COMP
HDMI
VGA
ZOOM
GUIDE
PICTURE
AUDIO
INFO
CH
VOL
MUTE
MENU
EXIT
ENTER
2
1
3
4
5
7
8
9
0
RECALL
CCD
MTS/SAP
6
TIME
SLEEP
5
EN-31203B
Notes:
•
•
•
•
Do not expose the remote control to shock or liquids.
Do not use the remote control in an area with high humidity.
Do not place the remote control in direct sunlight.
Do not place objects, such as furniture, between the remote control
and the remote sensor.
• The remote control may not work if direct sunlight or bright light
shines on the remote sensor. Either move your TV or change the angle
at which you use the remote control.
Programming a universal remote control
to work with your TV
You can operate your TV with a new or existing universal remote
control.
To program your existing universal remote control:
1 To program your existing remote control to work with your Dynex
TV, see the table below for common codes. If you have problems
programming your remote, or need a different remote control
code, visit www.dynexproducts.com for the latest remote control
code information.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
3 If all else fails, you must use a different universal remote control
that can operate both your set-top box and your TV. Five such
remotes are listed on the chart, but many other compatible
models are available in the market.
4 For more help, call technical support for your universal remote
control or set-top box manufacturer, or call the Dynex Customer
Care Center. For US and Canada markets, call 1-800-305-2204.
For Mexico markets, call 01-800-926-3020.
Making connections
Before you make any connections:
• Check the plugs on the ends of cables to make sure that they are
the correct type before you try plugging them into jacks on the
TV.
• Make sure that all plugs are securely inserted into the jacks.
Loose connections can result in image or color problems.
• When connecting devices to the TV, make sure that the TV and
the device are turned off and that the power cords are
unplugged.
Connecting the power
To connect the power cord:
• Connect the power cable to the AC IN jack on the back of the TV,
then connect the other end to a power outlet.
Power outlet
Universal remote control manufacturer and model
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8
115
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Set-top box manufacturer and model
Comcast
M1057
0463
Dish
Network
VIP508,
VIP622
720
Motorola
DRC800
Power cord
TIVO
DirectTV
Series 3, HD RC23
Notes:
0463
0091
10463
• The AC plug on the TV may be different from the one shown.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 8 Thursday, July 22, 2010 10:30 AM
8
DX-32L152A11
Making connections
• Make sure that you only use the type of power source indicated on the
marking label.
• Always unplug the power cord when not using the TV for a long
period of time.
Selecting a location
Connecting a component video device
Component cables often have red, green, and blue color-coded video
connectors and red and white audio connectors. Match the colors when
making connections.
To connect a component video device:
You should select a location for the TV:
• Where direct light does not reflect on the screen
• That has indirect and soft lighting
• Where the TV has access to an antenna or cable TV connection
• Where the TV has access to a power outlet
Note: Watching TV in total darkness or with a reflection on the screen
may cause eye strain.
1 Make sure that your TV’s power cord is unplugged and the
component video device is turned off.
2 Connect a component video cable to the COMPONENT OUT jacks
on the component video device.
AV
COMP
VIDEO
L
R
L
Y
Pb
Pr
R
Y
B
L
R
R
ANT/CABLE IN
DIGITAL
AUDIO OUT
Back of TV
To connect an HDMI device:
• Connect one end of an HDMI cable (not included) to the HDMI 1
or HDMI 2 jack on the back of your TV, then connect the other end
of the cable to the HDMI OUT jack on the HDMI device.
Audio cable
Note: If your device has an HDMI connection, we recommend you use it to
get the best picture and sound quality possible.
Component video cable
Connecting an HDMI device
Component video device
HDMI device
3 Connect the other end of the component video cable to the
COMPONENT jacks on the back of your TV.
4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the
component device.
5 Connect the other end of the audio cable to the COMPONENT
AUDIO-R and AUDIO-L jacks on the back of your TV.
HDMI cable
PC/DVI AUDIO IN VGA
HDMI2
HDMI 1
Back of TV
Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect
to the HDMI jack on the TV, then connect an audio cable to the
PC IN AUDIO jack on the back of the TV.
To play from the HDMI device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select HDMI1 or HDMI2, then press ENTER.
Note: You can also press HDMI once to select HDMI1 or twice to select
HDMI2.
3 Turn on the HDMI device, then set it to the correct mode. Refer to
the instructions that came with the HDMI device.
To play from the component video device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select Component, then press ENTER.
Note: You can also press COMP once to select Component.
3 Turn on the component video device and start playback. Refer to
the instructions that came with the component video device.
Connecting an antenna, cable TV, or
satellite TV box
If you are connecting a satellite TV or cable box, you can use one of the
following (if available):
• Best - HDMI cable
• Better - Video component cables
• Good - Video composite cable
• Acceptable - 75-ohm coaxial cable.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 9 Thursday, July 22, 2010 10:30 AM
Making connections
DX-32L152A11
To connect an antenna, cable TV, or satellite TV box:
9
To play the external AV device:
• Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLE
IN jack on the back of the TV, then connect the other end of the
cable to the antenna or cable TV wall jack.
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select AV, then press ENTER.
Note: You can also press VIDEO once to select AV.
Home antenna terminal
(75 ohm)
ANT/CABLE IN jack on
the back of the TV
3 Turn on the device, then start playback on the device.
Connecting a computer
To connect a computer:
Antenna, cable TV,
or satellite box
1 Make sure that your TV’s power cord is unplugged and the
computer is turned off.
2 Connect one end of a VGA cable (not included) to the VGA jack on
the back of the TV, then connect the other end of the cable to the
VGA jack on the computer.
75-Ohm coaxial cable
Audio cable
VGA
cable
Back of TV
PC/DVI AUDIO IN VGA
ANT/CABLE IN jack on
the back of the TV
HDMI2
HDMI 1
Notes:
• We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
• Do not bundle the coaxial cable with the power cord or any other
cables.
• If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
Connecting a VCR, camcorder, or game
console
Note: If the VCR, camcorder, or game console has component jacks
(better), or an HDMI jack (best), connect them using the best available
connection.
To connect a VCR, camcorder, or game console:
1 Make sure that your TV’s power cord is unplugged and the VCR,
camcorder, or game console is turned off.
2 Connect one end of a standard AV cable (not included) into the
AV VIDEO jack on the back of the TV, then connect the other end
of the cable to the AV OUT VIDEO jack on the external device.
VCR, camcorder, or game console
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
AV cable
AV
COMP
VIDEO
L
Y
Pb
RBack of TV
Pr
L
R
ANT/CABLE IN
DIGITAL
AUDIO OUT
3 Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the external device,
then connect them to the AV L and R jacks on the back of your TV.
Computer
3 Connect one end of an audio cable with a stereo mini-plug (not
included) to the PC/DVI AUDIO IN jack on the back of the TV,
then connect the other end of the cable to the AUDIO OUT jack
on the computer.
To play video from the computer:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the computer display
properties as needed.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 10 Thursday, July 22, 2010 10:30 AM
10
DX-32L152A11
Turning on your TV for the first time
Connecting a home theater system
Connecting using a digital audio cable
To connect using a digital optical cable:
1 Make sure that your TV’s power cord is unplugged and the home
theater system is turned off.
2 Connect one end of a digital coaxial audio cable (not included) to
the DIGITAL AUDIO OUT jack on the back of the TV.
Back of TV
DIGITAL AUDIO
OUT
Turning on your TV for the first
time
To configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected your devices to the TV, and connected the AC
power.
2 Press (Power), then wait several seconds. The Initial Setup
screen opens (only the first time you turn on your TV). Follow the
prompts to complete the setup.
Setup Wizard
Digital coaxial cable
Language
Choose your menu Language
English
Espanõl
Français
Home theater
system
Sutup
3 Connect the other end of the audio cable to the digital coaxial
input jack on the home theater system.
Note: The DIGITAL OUTPUT jack only works with digital TV channels.
To play TV sound through a home theater system:
1 Turn on the TV and select a program to watch.
2 Turn on the home theater system and select the TV sound source,
then adjust the volume to a comfortable level.
Select
ENTER
Select
ENTER Next
3 Press or to select the menu language you want, then press
ENTER. The Picture Mode screen opens.
Setup Wizard
Picture
OSD Language
Screen Mode
Choose your
picture Mode
DPMS
Time Setup
Caption
Reset
Default
Home
mode
Connecting headphones
Mode
English
Normal
ON
Retail mode
Warning: When using headphones, adjust the headphone volume to
avoid excessively loud volume which can damage your hearing.
To connect headphones:
• Plug the headphones (not included) into the
jack on the back of the TV.
Sutup
(headphone)
Note: The TV sound automatically mutes when headphones are
connected.
PC/DVI AUDIO IN VGA
ENTER Enter
Select
ENTER Next
Select
Back
4 Press or to select the Home Mode or Retail Mode, then
press ENTER. Home Mode reduces the TV’s total power
consumption. The Tuner Mode screen opens.
Setup Wizard
Tuner
OSD Language
Screen Mode
Choose your
Tuner Mode
DPMS
Time Setup
Caption
Reset Default
Antenna
Mode
English
Normal
ON
Cable
Cable/Satelite Box
Sutup
Select
ENTER Enter
ENTER Next
Select
Back
5 Press or to highlight Antenna, Cable, or Satellite Box,
depending on the type of connection you have, then press
ENTER. The Channel screen opens.
• If you are using an antenna for a standard or HD TV signal or
if your cable TV is connected directly to the TV (without a
box), select Antenna.
• If a cable is connected to your TV, select Cable.
• If your TV is connected to a cable/satellite box, select
Cable/Satellite Box.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 11 Thursday, July 22, 2010 10:30 AM
Understanding the basics
6 Press or to select Scan, then press ENTER. The channel
scan begins.
DX-32L152A11
11
• To select a digital channel, press the number buttons to
select the main digital channel, then press the dot (.) button,
then the number buttons again to select the sub-channel.
Wait for the channel to change or press ENTER to change the
channel.
Note: Button presses must be within three seconds of each other.
• Press RECALL to go to the last channel viewed.
• Press CH-LIST to display a list of memorized channels, press or
to select the channel you want from the list, then press ENTER
to go to that channel.
• Press FAVORITE to display a list of your saved favorite channels,
press or to select the channel you want from the list, then
press ENTER to go to that channel.
Your TV automatically scans for available channels in your area
and stores the channel information in the channel list. This may
take several minutes. While scanning, the TV displays a progress
report.
Notes:
• Channel scan is not necessary if you are using a satellite or cable box.
• Channel scan can take up to 30+ minutes.
• You can press EXIT at any time to stop the auto scan, but you will
need to run the auto scan again to create a channel list.
Note: If the list has more than one page, press
the pages.
or
to scroll through
Adjusting the volume
To adjust the volume:
• Press VOL /VOL to to increase or decrease the volume.
• Press MUTE to temporarily turn off all sound. Press MUTE again
to restore the sound.
Displaying program information
To display program information:
Understanding the basics
Turning your TV on or off
To turn your TV on or off (standby mode):
1 Plug the power cord into an AC power outlet.
2 Press (power). Your TV turns on.
3 Press again to turn off your TV. When you turn off your TV, it
goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To
completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it
automatically goes into standby mode.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT on the remote control or on
the TV. The INPUT SOURCE menu opens.
2 Press or to highlight the video source you want, then press
ENTER. Options include TV, AV, Component, VGA (computer),
HDMI1, or HDMI2.
Selecting a channel
Tip: If you are using a cable or satellite box, use the remote control that
came with that device to change channels.
To select a channel:
• Press CH /CH to go to the next or previous channel.
• Press the number buttons to enter the channel number you want,
then wait for the channel to change, or press ENTER to change
the channel immediately.
• Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
• Digital signal information—Displays channel number,
station name, channel label (if preset), broadcast program
name, TV rating, signal type, audio information, resolution,
CC mode, current time, and current program start and end
times when watching a digital channel.
• Analog signal information—Displays channel number,
channel label (if preset), signal type, audio information, and
resolution when watching an analog channel.
• Press GUIDE to show the digital program guide, which may show
a list of available programs, program times, and program
summaries, depending on the information provided by the
broadcaster.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 12 Thursday, July 22, 2010 10:30 AM
12
DX-32L152A11
Understanding the basics
Navigating the menus
MENU
Press to display the Main menu.
Press to select menus, to adjust selected
items, or move on-screen cursor left or right.
ENTER
ENTER
Audio
Press to select the menu items.
Balance
Lets you adjust the balance between the left and
right speakers.
Surround
Sound
Lets you turn the surround sound effect on or off.
Equalizer
Lets you select the audio frequency you want to
adjust and change its value.
Auto Volume Lets you select whether to apply the audio
Control
settings for all input sources, as well as for both
analog and digital TV channels (OFF), or only to
the current one (ON).
SPDIF Type
Lets you select the preferred audio format for
SPDIF audio signals. SPDIF is only available on
digital channels or when using an HDMI device.
Choose from PCM, RAW, or Off.
OSD
Language
Lets you select the language for the on-screen
display. Choose from English, French, or
Spanish.
Screen Mode Lets you select the aspect ratio of the screen.
Choose from AUTO, Normal, Wide, or Cinema
to Zoom.
ENTER
EXIT
Use this setting when using your TV with a
computer. When using a connected computer,
lets the computer control if the screen is on or
off.
Time Setup
Lets you configure the system clock and time
zone settings. You can also choose to enable the
Date/Time features and set up the sleep timer.
Press to confirm your selection or enter a
sub-menu.
Press to close the menu or return to the
previous screen.
Setup Caption
Use the on-screen menu to configure the various operational settings of
your TV. To access the menu, press MENU. The menus and their
corresponding functions are described in the following table:
Picture Mode Lets you enable one of five preset viewing
options optimized for different viewing
conditions.
Brightness
Lets you adjust the level of brightness on the
screen. Increasing brightness can add more light
to dark areas of the picture.
Contrast
Lets you adjust the level of picture contrast.
Increasing the contrast adds more light to the
white areas of the picture.
Color
Lets you adjust the level of color intensity.
Tint
Lets you adjust the overall color of the
picture.(only supported in TV/AV mode)
Sharpness
Lets you adjust the focus of the picture. Increase
sharpness for a clearer picture, or decrease
sharpness for a smoother picture.
Lets you configure the settings for closed
captioning (CC, also known as subtitles) in TV
programs.
Reset Default Lets you reset all operational settings to their
default factory value. Do this only if any of the
following conditions occurs:
• The system fails to respond to the remote
control (make sure the remote control
batteries are still working and that you are
within the transmission range).
• The new configuration settings cause
unexpected results.
• You forget the system PIN.
On-screen menu overview
Video
DPMS
Channel
Block
Lets you select certain channels to be blocked.
Program
Block
Lets you select certain programs to be blocked.
Input Block
Lets you select certain input sources to be
blocked.
Parental Change
Password
Lets you set a new password for parental
controls.
Button Lock
Lets you lock TV buttons so that only the remote
control can operate the TV. Removing the AC
power and reconnecting it resets this function
back to default.
Color
Lets you select one of three preset color
temperature temperature settings: Cool, Standard, or Warm.
Clean All
Eliminates all channels (and presets) stored in
the TV.
Advanced
Video
Tuner Mode
Lets you select the signal source for your TV
(Antenna or Cable).
Channel
Scan
Lets you initiate an automatic channel scan to set
up the available channels in your TV.
Accesses advanced video settings such as
Adaptive Contrast, Noise Reduction, and
Overscan (in HDMI only).
Channel Skip Lets you select certain channels to eliminate
from the available channels list.
TV
MTS/SAP
Lets you enable the SAP (Second Audio Program)
function. This lets you listen to a program using
an alternative second language. Function
availability depends on your TV provider.
Audio
Language
Lets you select the language track you prefer for
viewing digital TV programs. Available options
depend on your digital TV provider.
Note: Menu items that are not selectable are grayed out. Menus in this
manual are described in TV mode, unless otherwise indicated.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 13 Thursday, July 22, 2010 10:30 AM
Adjusting the picture
DX-32L152A11
Adjusting the picture
To adjust the picture:
13
• Cinema—Stretches the picture at the edges [21:9
aspect], but maintains a good aspect ratio at the center
of the screen.
1 Press MENU. The Main menu opens.
2 Press ENTER or . The Video menu opens.
Adjusting the sound
&XVWRP
Color
Tint
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Picture Mode—Selects the picture mode. You can select:
• Vivid (a bright and vivid picture)
• Standard (a standard picture)
• Theater (a finely detailed picture)
• Energy Saving (the backlight brightness is decreased)
• Sports (a dynamic picture)
• Custom (customized picture).
Note: You can also press PICTURE on the remote control to select the
picture mode.
• Brightness–Lets you increase or decrease the brightness of
the picture. Increasing the brightness can add more light to
dark areas of the picture, while decreasing the brightness
can add more darkness to light areas of the picture.
• Contrast–Lets you increase or decrease the contrast of the
picture. Increase the contrast to adjust the white areas of the
picture or decrease the contrast to adjust the black areas of
the picture.
• Color–Lets you adjust the intensity of the colors.
• Tint–Lets you adjust the overall color of the picture (only
supported in TV/AV mode).
• Sharpness–Lets you increase the sharpness level for clearer
images or decrease the sharpness level for smoother images.
• Color temperature –Lets you change the color
temperature. You can select the color temperature from
three options: Cool, Standard, or Warm.
• Advanced Video–Lets you access and adjust advanced
video settings,such as Noise Reduction, Adaptive Contrast, or
Overscan (only in HDMI).
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Choosing the display format (aspect ratio)
To choose the display format:
1 Press ZOOM on the remote control repeatedly to cycle through
the available display formats. Options include:
• Auto —Selects the correct aspect ratio automatically.
Available only when Auto Zoom is turned ON.
• Normal —Selects the correct aspect ratio to match the
source image.
• Zoom —Enlarges the picture but may crop the top and
bottom.
• Wide—Shows a full-screen picture.
To adjust the sound:
1 Press MENU. The Main menu opens.
2 Press or to highlight Audio, then press ENTER or . The
Audio menu opens.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Balance—Adjusts the balance between the left and right
audio channels.
• Surround Sound —Turns the surround sound effect on or
off.
• Equalizer—Lets you select the frequency you want to
adjust and change its value.
• Auto Volume Control—Lets you turn automatic volume
control on or off. When this option is turned on, it keeps the
audio in a preset range to eliminate large spikes in volume.
• SPDIF Type—Lets you select the preferred audio format for
SPDIF audio signals. SPDIF is only available on digital
channels or when using an HDMI device. Choose from PCM,
RAW, or Off.
Note: By selecting SPDIF Type, you can choose the digital audio output
type. If Audio Volume Control is On, the audio output control is
activated.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Selecting the audio mode
To select the audio mode:
• Press AUDIO on the remote control one or more times to cycle
through the available sound modes. Options include Standard,
Speech, User, and Music.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 14 Thursday, July 22, 2010 10:30 AM
14
DX-32L152A11
Changing channel settings
To change the channel settings:
1 Press MENU. The Main menu opens.
2 Press or to highlight TV, then press press ENTER or . The
TV menu opens.
MTS/SAP
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Tuner Mode –Lets you select Antenna or Cable.
• Channel Scan–Lets you scan for channels that have signals
and stores the channels information in memory. When you
press CH or CH , your TV skips any channels that do
not have a signal.
• Channel Skip–Lets you delete a channel stored in memory.
When you press CH or CH , your TV skips the channel
you deleted. You can still tune to the channel using the
number buttons on the remote control.
• MTS/SAP–Lets you select the sound mode. You can select
Mono, Stereo, or SAP (second audio program).
• Audio Language –Lets you select the audio language for a
program (if other languages are available).
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Setting parental controls
Parental controls let you prevent your children from watching
inappropriate material on TV. When set, parental controls read the
rating of the program (with some exceptions, such as news and sports)
and deny access to programs that exceed the ratings level you select. To
watch programs that exceed the selected rating, you must enter a
password.
Changing channel settings
3 Press the number buttons to enter the four-digit password. The
default password is 0000. You should change the password to a
number you can remember. The Parental Controls menu opens.
4 Press or to highlight an option, then press or to adjust
the option. You can select:
• Change Password–Lets you change the password. The first
time you use this function, use the default password (0000).
If you want to change it, first enter the new password then
enter the same password again.
• Channel Block–Lets you block any channel you select.
• Input Block–Lets you block the input source with this
function. For example, if you want to block AV input,
highlight AV, then press ENTER.The AV input will be
blocked.
• Program Block–
• A–Rating Enable is on.
• B–U.S. TV Ratings: You can choose TV ratings according
to the illustration on the screen.
• C–The settings for U.S. Movie Ratings, Canada (English)
Ratings, and Canada (French) Ratings follow Step B. If
you want to block an unrated program, turn on this
function. You can select all the ratings listed in the
charts below.
Note: On the MPAA RATING screen, press or to select the rating. That
rating and all other higher ratings are blocked.
U.S. TV ratings (age-based)
These ratings are determined by the Federal
Communications Commission (FCC).
TV-Y
All children.
TV-Y7
Suitable for children 7 and older.
TV-G
General audiences.
TV-PG
Parental guidance suggested.
TV-14
Parental guidance strongly suggested.
TV-MA
Mature audiences only.
U. S. TV ratings (content-based)
FV
Fantasy violence.
V
Violence.
S
Sexual situations.
L
Strong language.
D
Suggestive dialog.
To set parental controls:
1 Press MENU. The Main menu opens.
2 Press or to highlight Parental, then press ENTER or . The
Parental menu opens.
U.S. movie (MPAA) ratings
These ratings are determined by the Motion Picture
Association of America (MPAA).
G
General audiences.
PG
Parental guidance suggested.
PG-13
Suitable for children 13 and older.
R
Parental guidance suggested for children
under 17.
NC-17
Not suitable for children under 17.
X
Adults only.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 15 Thursday, July 22, 2010 10:30 AM
Adjusting TV settings
DX-32L152A11
Canadian English ratings
These ratings are based on the Canadian Home Video
Rating System, determined by the Canadian Motion
Picture Distributors Association (CMPDA).
C
Suitable for all children.
C8+
Suitable for children 8 and older.
G
General audiences.
PG
Parental guidance suggested.
14+
Suitable for children 14 and older.
18+
Adults only.
Canadian French ratings
These ratings are based on the classification categories
determined by La Régle du cinéma du Québec.
G
General audiences.
8 ans+
Suitable for children 8 and older.
13 ans+
Suitable for children 13 and older.
16 ans+
Suitable for children 16 and older.
18 ans+
Adults only.
15
• Caption–Lets you set up closed captions. Choose from
Analog Closed Caption, Digital Closed Caption, and
Digital Caption Style.
• Analog Closed Caption–CC1, CC2, CC3, CC4, TEXT1,
TEXT2, TEXT3, and TEXT4.
• Digital Closed Caption–Service1, Service2,
Service3, Service4, Service5, and Service6.
• Digital Caption Style–There are two digital caption
styles. One is the automatic function set by the
broadcaster, and the other is the custom style where you
can adjust the font size, color, opacity, background color,
and so on.
• Reset Default–Resets the TV to its original factory settings.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Troubleshooting
Before calling for service, check the following information for possible
solutions to problems you may experience. If none of these solutions
work, turn off the TV, then turn it on again.
Caution: Do not try to repair the TV yourself. Refer all servicing to
qualified repair personnel.
5 Press EXIT to close the menu.
Video and audio
Adjusting TV settings
To adjust the setup:
1 Press MENU. The Main menu opens.
2 Press or to highlight Setup, then press ENTER or . The
Setup menu opens.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• OSD Language–Press the right or left arrow buttons to
choose the OSD Language. Choices include English,
Spanish, and French.
• Screen Mode–Press the arrow buttons to choose the screen
aspect ratio. Choices include Normal, Wide, or Cinema to
Zoom. You can also press the ZOOM button on your remote
control.
• DPMS–Use this setting with a computer. When DPMS is on,
the computer controls whether the screen is on or off. For
example, if the computer is in sleep mode, the screen is
switched off. If the computer is activated, the screen also is
activated.
• Time Setup–Lets you set the exact time. You can also set up
Sleeper Time and Auto Sleep Time.
Problem
Solution
No picture (screen is not lit)
and no sound.
• Make sure that the power cord is
plugged in.
• Press POWER on the TV or the
remote control.
• Make sure that the correct video
input source is selected. For more
information, see “Selecting the
video input source” on page 11.
• Try another channel. The station
may be experiencing problems.
Dark, poor, or no picture
(screen is lit), but sound is
good.
• Adjust the brightness. For more
information, see “To adjust the
picture:” on page 13.
• Make sure that the correct picture
mode is selected. For more
information, see “To adjust the
picture:” on page 13.
• Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 8.
No color, dark picture, or
color is not correct.
• Adjust the color saturation. For
more information, see “Adjusting
the picture” on page 13.
Only snow (noise) appears
on the screen.
• Try another channel. The station
may be experiencing problems.
• Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 8.
Dotted lines or stripes
appear on the screen.
• Adjust the antenna.
• Move the TV away from noise
sources such as cars, neon signs,
or hair dryers.
Double images.
• Try using a highly directional
outdoor antenna or cable TV.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 16 Thursday, July 22, 2010 10:30 AM
16
DX-32L152A11
Problem
Maintenance
Solution
The picture has a few bright
or dark spots.
• A few bright or dark spots on an
LCD screen is normal. It does not
affect the operation of this TV.
Good picture, but no
sound.
• Make sure that the sound is not
muted.
• Make sure that the sound mode is
set to Stereo or Mono. For more
information, see “Selecting the
audio mode” on page 13.
Audio noise.
• Make sure that there is no
interference with infrared
equipment such as a cordless
telephone or headphones. Move
the infrared equipment away
from the TV to eliminate the
noise.
General
Problem
Solution
One or more channels do
not display.
• Make sure that the channels are
not blocked. For more
information, see “Setting parental
controls” on page 14.
Password is lost.
• Enter 9999 to access parental
controls, then set a new
password. For more information,
see “Setting parental controls” on
page 14.
Some settings cannot be
accessed.
• If a setting is grayed, the setting is
not available in the current video
input mode.
TV cabinet creaks.
• When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
Control buttons on the TV
do not work.
• Disconnect the power cord, wait a
few seconds, then reconnect the
power cord and turn on the TV.
Remote control
Problem
Remote control does not
work.
Trouble programming your
existing universal remote
control.
Solution
• Make sure that the TV power cord
is plugged in.
• Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
• Make sure that the batteries are
installed correctly. For more
information, see “Installing
remote control batteries” on
page 6.
• Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 6.
• See instructions and a table of
common codes in “Programming
a universal remote control to
work with your TV” on page 7.
• Codes are subject to change. For
up to date codes, go to
www.dynexproducts.com.
• Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 6.
• Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
Note: If the problem is not solved by using these troubleshooting
instructions, try turning off your TV, then turning it on again.
Maintenance
Just like with any other household appliance, the performance and
life-expectancy of your TV depends on how well you maintain it. Follow
the procedures described here to clean the TV case and the LCD screen.
Cautions:
• Make sure that the TV is turned off and the power cord is
disconnected from the power outlet before cleaning the TV.
• Never spray or pour any liquid directly onto the screen or the case.
Cleaning
• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a small amount of
non-ammonia, non-alcohol-based, non-abrasive detergent
solution.
• Clean the screen with a clean, soft, lint-free cloth. If additional
cleaning is necessary, apply a small amount of non-ammonia,
non-alcohol-based, non-abrasive detergent solution to the cloth.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 17 Thursday, July 22, 2010 10:30 AM
Specifications
DX-32L152A11
Specifications
Specifications subject to change without notice.
Weight and dimensions shown are approximate.
TV type
TV panel
TV system
Receiving channels
LCD
31.5-inch TFT LCD
NTSC-M, ATSC
VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1-135
DTV: 2-69
BTSC system
6Wx2
AC 120 V, 60 Hz
117 W
31.02 × 22.12 × 9.06 inches
(788 × 562 × 230 mm)
Audio multiples
Audio out
Power requirement
Power consumption
Dimensions
(W × H × D with stand)
Weight 20.51 lbs. (9.3 kg)
Input terminals Composite video/L and R audio (1)
Output terminals
Control terminals
Component video/L and R audio (1)
HDMI (2)
VGA/audio (1)
ANT/Cable In (1)
Digital Coaxial Audio (1)
Headphone (1)
SERVICE PORT (1)
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
17
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003
du Canada.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
HDMI
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LCC.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 18 Thursday, July 22, 2010 10:30 AM
18
DX-32L152A11
Legal notices
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 19 Thursday, July 22, 2010 10:30 AM
Legal notices
One-year limited warranty
US and Canada Markets
Definitions:
Dynex Products ("Dynex") warrants to you, the original purchaser of this new
Dynex-branded television ("Product"), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a period of one (1) year from
the date of your purchase of the Product ("Warranty Period"). For this warranty to apply,
your Product must be purchased in the United States or Canada from a Best Buy or
Future Shop authorized dealer of Dynex brand products only that are packaged with this
warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the
Product. Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship
of the Product is determined to be defective by an authorized Dynex repair center or
store personnel, Dynex will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable
products or parts. Products and parts replaced under this warranty become the property
of Dynex and are not returned to you. If service of Products or parts are required after
the Warranty Period expires, you must pay all labor and parts charges. This warranty
lasts as long as you own your Dynex Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail store location and your
television Product has a screen size of less than 37 inches, please take your original
receipt and the Product to any Best Buy or Future Shop store. Make sure that you place
the Product in its original packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the Product from a Best Buy or
Future Shop online web site, mail your original receipt and the Product to the address
listed on the web site. Make sure that you put the Product in its original packaging or
packaging that provides the same amount of protection as the original packaging.
To obtain in-home warranty service for a television with a screen 37 inches or larger, in
the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call
1-800-663-2275. Call agents will diagnose and correct the issue over the phone or will
have a Dynex-approved repair technician dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in the United States
and Canada at Best Buy or Future Shop branded retail stores or websites.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as power surges
• Accident(s)
• Misuse
• Abuse
• Negligence
• Commercial purposes/use, including but not limited to use in a place of business
or in communal areas of a multiple dwelling condominium or apartment
complex, or otherwise used in a place of other than a private home.
• Modification of any part of the Product, including the antenna
• Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Dynex to service the Product
• Products sold "as is" or "with all faults"
• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
DX-32L152A11
19
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Contact Dynex:
For customer service please call 1-800-305-2204
www.Dynexproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2010 BBY Solutions, Inc.
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their respective
owners.
Mexico Market
{RETAILER SEAL}
PLACE STICKER OF PRODUCT MAKE & MODEL HERE
DATE OF PURCHASE:____________________________
Definitions:
Dynex Products ("Dynex") warrants to you, the original purchaser of this new
Dynex-branded television ("Product"), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a period of one (1) year from
the date of your purchase of the Product ("Warranty Period"). For this warranty to apply,
your Product must be purchased in the United States or Canada from a Best Buy or
Future Shop authorized dealer of Dynex brand products only that are packaged with this
warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the
Product. Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship
of the Product is determined to be defective by an authorized Dynex repair center or
store personnel, Dynex will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable
products or parts. Products and parts replaced under this warranty become the property
of Dynex and are not returned to you. If service of Products or parts are required after
the Warranty Period expires, you must pay all labor and parts charges. This warranty
lasts as long as you own your Dynex Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy retail store location and your television
Product has a screen size of less than 37 inches, please take your original receipt and the
Product to any Best Buy store. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of protection as the original
packaging. If you purchased the Product from a Best Buy online web site, mail your
original receipt and the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that provides the same
amount of protection as the original packaging.
To obtain in-home warranty service for a television with a screen 37 inches or larger, in
Mexico call 01 800-433-5778. Call agents will diagnose and correct the issue over the
phone or will have a Dynex-approved repair technician dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in Mexico at a Best
Buy branded retail stores or website.
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 20 Thursday, July 22, 2010 10:30 AM
20
DX-32L152A11
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as power surges
• Accident(s)
• Misuse
• Abuse
• Negligence
• Commercial purposes/use, including but not limited to use in a place of business
or in communal areas of a multiple dwelling condominium or apartment
complex, or otherwise used in a place of other than a private home.
• Modification of any part of the Product, including the antenna
• Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Dynex to service the Product
• Products sold "as is" or "with all faults"
• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO
OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Contact Dynex:
For service, please call 01 800-926-3020
www.dynexproducts.com
Distributed by Best Buy Imports, S. de R.L. de C.V.
Av. Santa Fe 485, Segundo Piso,
Colonia Cruz Manca,
Programa Parcial de Desarrollo Santa Fe,
Delegación Cuajimalpa, Distrito
Federal, México 05349
RFC#BBI0802114Q2
© 2010 BBY Solutions, Inc.
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their respective
owners.
Legal notices
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 21 Thursday, July 22, 2010 10:30 AM
Legal notices
DX-32L152A11
21
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 22 Thursday, July 22, 2010 10:30 AM
22
DX-32L152A11
Legal notices
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 23 Thursday, July 22, 2010 10:30 AM
Legal notices
DX-32L152A11
23
DX-32L152A11_10-0615_MAN_ENG_V1.book Page 1 Thursday, July 22, 2010 10:30 AM
If the power cord has been damaged, it should be replaced by the manufacturer, your service
provider or qualified personnel to avoid risks.
Si el cordón de alimentación es dañado, este debe ser remplazado por el fabricante o su agente de
servicio o por personal calificado para evitar el riesgo.
www.dynexproducts.com
US and Canada Market - (800) 305-2204
Mexico Market - 01 800-926-3020
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2010 BBY Solutions, Inc. All rights reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and
brand names are trademarks of their respective owners.
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia Cruz Manca, Programa
Parcial de Desarrollo Santa Fe, Delegación Cuajimalpa, Distrito Federal, México 05349
RFC#BBI0802114Q2
Se incluye el manual. Favor de leer este manual antes de usar el producto.
Para el Soporte técnico de Dynex en México,
favor llame al:01 800-926-3020 http://www.dynexproducts.com
10-0615
ENGLISH