Download McAfee SG720 Installation guide
Transcript
uf_SG720_qig_700-2240A00_en-us.fm Page 8 Monday, October 12, 2009 11:56 AM Set your password Launch your Web browser. The UTM Firewall Management Console window appears. 1 NOTE: If the UTM Firewall Management Console window does not appear, navigate to 192.168.0.1. If you are unable to browse to the UTM Firewall device at 192.168.0.1, or if the initial username and password are not accepted: a Press the erase button on the UTM Firewall device's rear panel twice within 3 seconds, 1 second apart. This resets the UTM Firewall device to its factory default settings. b Wait 20–30 seconds, and then try browsing to 192.168.0.1 again. A logon prompt appears. Enter the initial user name and password: 2 • User name – root • Password – default Click OK. The Set Administrative Password window appears (Figure 3). 3 Figure 3 Set Administrative Password window . 8