Download Canon DCD CAMCORDER Operating instructions

Transcript
Using the Self Timer
To change the operating mode, refer to About the Operating Modes (
11).
: Set the camcorder in record pause mode.
CAMERA SETUP
MENU
SELF TIMER
ON
MENU
“
” appears.
:
Press Start/Stop .
The camcorder starts recording after a 10-second countdown. The countdown appears
on the screen.
:
Press Start/Stop , first halfway to activate the autofocus and then fully
to record the still image.
The camcorder will record the still image after a 10-second countdown. The countdown
appears on the screen.
Once the countdown has begun, you can also press Start/Stop to cancel the
self timer. The self timer will be canceled if you turn off the camcorder.
46