Download COMPRO U700 - START UP GUIDE Installation guide
Transcript
5. Connect the black socket of Power Up patch cable to the power switch connector on the mainboard. 6. Connect the white socket of Power Up patch cable to the connector named “JS2” on the VideoMate Vista E700 PCIe Tuner card. Note Double check your work. If you plug the cables into the incorrect pins, your PC may not start or otherwise function improperly. Connect the white end of the Power Up patch cable to the TV tuner card and the black end to the mainboard. Power Up Scheduling is not required for using VideoMate Vista E700 PCIe card. If you don’t want to use Power Up Scheduling from the Windows Shut down state, you can skip the power switch circuit connections, in other words, you can skip Power Up Connections in steps 3 through 6. You can still use scheduled recording from Standby mode or powered on state. 7. Insert VideoMate Vista E700 PCIe card in an open PCIe slot. This completes the hardware installation. Please read the following notes and proceed to install the software. 8