Download MHSC 36STFL Operating instructions

FIREPLACE installation
Lo-Rider Vent Free Fireboxes
Right (LRCF36) and left (LLCF36) corner installation
1. Attach nailing flanges in desired position. See Figure 16.
2. Slide firebox into prepared framing or position firebox in its final position and frame later.
3.Level and plumb firebox by checking edges of firebox. Shim if necessary.
4. Attach nailing flanges to studs. See Figure 18.
5. Install canopy. Refer to page 15 for canopy installation. Nailing Flange
Figure 18 - Location of Nailing Flanges
and Floor Screws
79D0007
13