Download Canon 3230 Installation guide

Sending E-Mail/I-Faxes
The following operations and settings are required to send e-mail/I-faxes with the machine.
• For information on the system requirements for using this function, see “Using E-Mail/I-Fax,” on p. 3-5.
• If you are using a NetWare network, NetBIOS network, or AppleTalk network, you cannot use this function.
1
Flow of Settings
1
Connect the machine to the network.
See “Connecting to a Network,” on p. 4-3.
See “Interface Settings,” on p. 4-9.
2
Set the machine to use the TCP/IP network.
See “TCP/IP Network Setup Procedures,” on p. 5-2.
See “Protocol Settings,” on p. 5-3.
3
Specify the e-mail/I-fax settings.
See “E-Mail/I-Fax Settings,” on p. 5-26.
1-6
Operations Required to Use the Machine