Download Cannon 10456G Technical data

SOMETHING WRONG
WITH YOUR COOKER
PROBLEM
CHECK
Cannot set an ‘Auto Cook’
programme or cannot get
the Timer to turn the oven
on or off at the required
times.
Timer display shows ‘0:00’
with ‘AUTO’ flashing.
Read the Timer instructions in this book carefully
remembering that the Cook period is the length of
time that the timer will switch the oven(s) on as part
of an Auto Cooking Programme.
The electricity supply to the cooker may have been
interrupted, but has now come back on again. Set
the correct time of day by following the instructions
given in the Timer section of this book.
The Timer may be set for an Auto Cooking
Fanned oven does not work, programme. Check the Timer to see if “AUTO” is
but the grill, top oven and
illuminated. If it is, follow the instructions given in
hotplate burners work.
the Timer section of this book to cancel the Auto
Cooking programme.
Oven lamp does not work.
The oven lamp is not covered by the guarantee. The
part is easily changed (see the section on oven lamp
replacement). A new lamp may be obtained from
our Parts Department (see Key Contacts, back page).
If there is still a problem contact your local Service office
(see KEY CONTACTS, back page).
26