Download Asus P4BP-MX 2.0 User guide

7. System Power LED connector (3-pin PLED1)
This 3-pin connector connects to the system power LED. If your case supports
a 3-pin connector, use this connector instead of the power LED connector in
the system panel.
®
P4VP-MX
PLED1
PLEDNC
PLED+
P4VP-MX Power LED
1
8. USB header (10-1 pin USB56)
If the USB ports on the rear panel are inadequate, two USB headers are
available for additional USB ports. The USB header complies with USB 2.0
specification that supports up to 480 Mbps connection speed. This speed
advantage over the conventional 12 Mbps on USB 1.1 allows faster Internet
connection, interactive gaming, and simultaneous running of high-speed
peripherals.
Connect an optional USB 2.0/GAME module to this header. The module has
two USB 2.0 ports that support the next generation USB peripherals such as
high resolution cameras, scanners, and printers.
You must install the driver before you can use the USB 2.0 capability.
USB+5V
USB_P4USB_P4+
GND
NC
®
P4VP-MX
1
P4VP-MX USB Header
USB+5V
USB_P5USB_P5+
GND
USB56
The USB2.0 module is purchased separately.
1-20
Chapter 1: Product introduction